Re: dvdrw disappears

thanks Michel
I am trying to alter the settings under the IDE contoller

the only thing that appeared to be linked through 'add/remove programs'
was
Ulead Straight to disc SDK, which I removed

I did try cdgone, did not appear to make any difference
I have run it again, but have not restarted since



"realcestmoi" wrote:

Hello Shane,

The UDMA settings you have to chanche under the ide controller not the cd
rom devices settings.

If you uninstalled udf reader the proper way it should be fine if not
reinstall it and uninstall it the proper way.

Did you try the registry patch? aumha.org/downloads/cdgone.zip

Best regards,
Michel Denie


"shanemail" <shanemail@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D5BFC289-E9BA-41A6-83A7-D2A17542B98B@xxxxxxxxxxxxxxxx
So much for that, the issue has returned....... again

Just wondering if it is safe to delete all of the UDF files,
there is about 15 of them
4 of these are in the NERO folder
the rest are in sytem32
although some of these are Wudf - not sure if they are the same thing.

As to changing the Ultra DMA Mode, as I have mentioned it appears to be
impossible through device manager.
I will have a look in the registry at some stage.

PS: Ulead Straight to disc SDK has not returned

thanks
shane
------------------------------------------------------------------------------------

"realcestmoi" wrote:

hello Shane,

you are most welcome.

Glad it solved your problem.

Best regards,
Michel Denie

"shanemail" <shanemail@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0A205DA2-6BFC-4508-9434-EB4F2E7FE372@xxxxxxxxxxxxxxxx
Thankyou Michel !!

I dont appear to be able to change the DMA mode, although it can most
likely
be done through the registry
I uninstalled "Ulead Straight to disc SDK" and the problem seems to be
resolved
(3 restarts - all good)
not even sure how or why it was installed in the first place
After everything I have tried, I was starting to believe it was
something
obvious, which is often the case.

Thankyou again - keep up the great work - very much appreciated
Shane

"realcestmoi" wrote:

Hallo Shane,

Try putting your DVD writer in Ultra DMA mode 2 and remove UDF reader
as
well since that is used to formatwre-writable cd's and Xp handles that
well
by its self.

Best regards,
Michel Denie

"shanemail" <shanemail@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B4E39A95-4451-4B0F-BF3E-AA6731823584@xxxxxxxxxxxxxxxx
thankyou for both of your prompt replies

I should have also mentioned that I have a CDRW connected on the
same
IDE
controller that works fine.

Peter,
I have not had roxio installed since installing XP late last year
and I have reformatted twice since then
I am currently using Nero for burning and have not had any issues
until
recently

Michel,
My problem is intermittent, the device is available at the moment
As I belatedly noted at the top of this post, I have a CDRW working
correctly all of the time, I believe this may make your initial
suggestion
unlikely in my case ?

with your second suggestion
both optical devices are connected to the
Secondary IDE Channel
Device 0 (CDRW) has a current transfer of Ultra DMA mode 2
Device 1 (DVDRW - Problem device) has a current transfer of Ultra
DMA
mode
4
I was initially hoping to peg this back to Ultra DMA mode 3 to
attempt
to
rectify the issue, but, the only adjustment available is changing
the
Transfer mode back to PIO
is this what you are suggesting ?

Thankyou
Shane
---------------------------------------------------------------------------------------



"realcestmoi" wrote:

Hi there,

This happens quite often if one of the third-party packages has
been
uninstalled. They add references in the Registry for modules which
they
use,
and these references fail to be removed, leaving Windows unable to
find
the
files apparently needed for CD devices at the next boot. There is a
simple
Registry patch to correct this (download it
aumha.org/downloads/cdgone.zip.

Before using the patch, be sure to back up the Registry. After
using
the
patch and rebooting, the drives should reappear. Any third party
package
that is still required will then need to be re-installed.

This problem also may arise if there is underlying trouble with the
Input-Output system of the machine: for example, interactions with
controllers like Promise or Highpoint, or with special drivers. It
may
be
worth trying a change in the DMA settings for the device in Control
Panel
|
System | Hardware | Device Manager. Under IDE controllers, double
click
on
the Primary or Secondary IDE Channel concerned, then click the tab
for
the
Advanced Settings page.



Best Regards,

Michel Denie


"Peter Foldes" <okf22@xxxxxxxxxxx> wrote in message
news:eW7WxgwVHHA.2256@xxxxxxxxxxxxxxxxxxxxxxx
This problem may occur if some CD recording programs from Roxio
Easy
CD
Creator is installed on the computer, and if the version of the CD
recording
program is not compatible with Windows XP.


--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be
acknowledged.

"shanemail" <shanemail@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FCF719DF-EA1F-497B-B7BB-2324C21A758F@xxxxxxxxxxxxxxxx
Hi
Hoping someone has some info on this issue.

A couple of weeks ago my DVDRW (liteon SHM 165P65) started
intermittently
disappearing from my system
ie: does not even show up in device manager.

I tried to read an old backup disc
which was formatted using Adaptec DirectCD
this installed udfreader on my system
have had the problem ever since

I have tried
waiting for it to be working - uninstalling it through device
manager
and
letting it auto reinstal.

sfc /scannow

reinstalling windows

reformatting my hard drive

After reformatting it worked fine for a while
but, after installing all updates through 'microsoft updates' the
issue
has
returned

Does anybody know if this is a known issue with a particular
update
?
and if so if there is a fix.

I receive no error codes at all

there is no upperfilter or lowerfilter values listed under the
registry
key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

Any help/suggestions will be appreciated
I have noted other people out there with very similar current
issues,
but,
nothing identical so far.

Thankyou
Shane












.

Relevant Pages

  • Re: Hive-based registry setting
    ... >; END HIVE BOOT SECTION ... > HD may contain system registry; ... >>> later in the file can overwrite settings from earlier in the file. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Sharing folders in Windows CE 5.0
    ... You can do this by creating the necessary registry settings and adding them to your project.reg file before you create your image. ... what file sharing scenario are you trying to get working? ... I would suggest you set your file server up using the RemoteAdmin ...
    (microsoft.public.windowsce.embedded)
  • Re: Non admin users cant do things they need to do
    ... only the administrator can. ... Could it be tht we're just missing a load of registry settings for our ... can set the time then they can fake out system event logs by changing ...
    (microsoft.public.windowsxp.embedded)
  • Help, help, help, more help, extra help, HELP! how to turn off IDE DMA...
    ... CS5530 companion chip, which has the DMA issues (16 byte transfers, ... What we've found is that with modern flash cards, ... I want to do is turn IDE DMA off in the registry. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: AutoPlay Help Once and For all?
    ... Start Registry Editor. ... Microsoft Newsgroups ... | Primary IDE and Secondary IDE used. ... | Both drives show up in the bios, both drives operate great, as long as you ...
    (microsoft.public.windowsxp.help_and_support)
Loading