Re: Windows 2000 Update Installation failure

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Uninstall all firewalls and try again.

Turn off ms fireall.


"BarHBar" <BarHBar@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B242EBC3-2723-4B99-A08C-60D77A13B261@xxxxxxxxxxxxxxxx
> Well, I am new to this, but have been following it for about 4 days as I
> have
> the same problem, I can manually install each one but when I try to auto
> update I get "Failed Updates". It seems to have started after I installed
> BITS 2.0 or one of the update pgms that MS wants you to load to help with
> auto update.
>
> The reason this is so new to me is that I went from ME to an old copy of
> 2000 that I had laying around. I did this a couple of days ago. Wanting to
> get all the updates I went to the Update site. I was able to load the
> first
> update, but then I loaded BITS and one other program to help "updating".
> It
> went south after that.
>
>
>
> "Tom" wrote:
>
>> has nothing to do with 2000, as xp has same problems.
>>
>> "y2kidunno" <y2kidunno@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:FE825763-2A43-4AED-AEDD-85B395A7216C@xxxxxxxxxxxxxxxx
>> >I tried this as well and no luck. I also tried updating BITS. No luck
>> >there
>> > either. What gives? Are they secretly desupporting 2000?
>> >
>> > "Tom" wrote:
>> >
>> >> That certainly does not fix this problem.
>> >> I didn't just diosable them, I uninstalled them.
>> >> This issue is a serious flaw in one of the uppdates.
>> >>
>> >>
>> >> "powhammer2" <powhammer2@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> >> news:D41D4446-4D3A-444E-A529-CABB1EE265A9@xxxxxxxxxxxxxxxx
>> >> > edj, I have posted an instruction on how to solve that problem that
>> >> > is
>> >> > by
>> >> > closing out all of your icons except the speaker icon in the lower
>> >> > task
>> >> > bar
>> >> > near the clock and then try the Windows Updates again. They should
>> >> > download
>> >> > and install normally like they should.
>> >> >
>> >> > "edj" wrote:
>> >> >
>> >> >> I just discovered that all updates since July, 2005 have failed to
>> >> >> install.
>> >> >> I tried to install just one update and got the message: The
>> >> >> following
>> >> >> updates were not installed
>> >> >> Windows Genuine Advantage Validation Tool
>> >> >> I noted the time before I started the update procedure but when I
>> >> >> check
>> >> >> the
>> >> >> log it had no record for today. The last log entry was in July,
>> >> >> 2005.
>> >> >> How can I get the updates to install? I'm starting to have a lot of
>> >> >> problems
>> >> >> with programs hanging up.
>> >> >>
>> >> >> Any help would be appreciated.
>> >> >> --
>> >> >> ed
>> >>
>> >>
>> >>
>>
>>
>>


.



Relevant Pages

  • Re: msn gaming zone, zonefriends
    ... Good luck! ... | Nope:'(still no luck, I did all that, and it still doesnt load and i still ... |> Reinstall Zone, especially Heartbeat, and then optimize ... |> | think its browser based. ...
    (microsoft.public.games)
  • RE: needhelp with new windows update
    ... c'not insal thet service by web update you mast dowload patch on yours ... I tried updating and recieved the error 0x8024402C. ... > troubleshooting directions as best as I could. ... > stopped and restarted auto update from the cmd prompt. ...
    (microsoft.public.windowsupdate)
  • Re: CPU problems after 8.0-STABLE update
    ... I installed 8.0 release and used it very briefly until updating through ... It was working fine, the CPU frequency was scaling as expected, I checked it ... Now, after updating through buildworld, powerd doesn't scale the frequency ... My observations pointed out that the problem is that the CPU load ...
    (freebsd-stable)
  • Re: Ryu Hayabusa is still a bad ass
    ... I skipped it the first time around because I heard it was so hard. ... picked up NGB since it had a lower difficulty level. ... If you think chapter 5 was hard, wait til you get a load of ... Good luck, Hank. ...
    (alt.games.video.xbox)
  • CPU problems after 8.0-STABLE update
    ... I installed 8.0 release and used it very briefly until updating through ... It was working fine, the CPU frequency was scaling as expected, I checked it ... Now, after updating through buildworld, powerd doesn't scale the frequency ... My observations pointed out that the problem is that the CPU load ...
    (freebsd-stable)