Re: windows update doesnt work at all, neither does auto updates
- From: "Patti MacLeod" <pam120@xxxxxxxxxxxxx>
- Date: Sun, 17 Apr 2005 21:21:52 -0400
You should be keying in regsvr and not regsur (I suspect that this is just a
typo in your post, as if you had keyed it in that way when running the
command, you would have received errors for all the other .dll files).
You should be keying in wucltui.dll and not wudtui.dll (I know it's
difficult to discern but where you have the "d" the letters are actually a
"c" followed by an "l" ), and you should be keying in msxml3.dll and not
msxm3.dll (you missed the "l" that follows the second "m"). If you prefer,
copy/paste the following into Notepad or Wordpad, and then copy/paste them
into the Open field when you go to Start>Run:
regsvr32 wucltui.dll
regsvr32 msxml3.dll
Regards,
--
Patti MacLeod
Microsoft MVP - Windows Shell/User
"Sunshine" <Sunshine@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:28992F00-E572-4AD9-A730-22EBE46FD7C2@xxxxxxxxxxxxxxxx
> these failed and could not be found
>
> regsur32 wudtui.dll
> regsur32 msxm3.dll
>
> should they have been ok?
>
> "Patti MacLeod" wrote:
>
> > Hi Sunshine,
> >
> > Give this a try..........
> >
> > Go to Start>Run and key in:
> > net.exe stop wuauserv
> > Click on OK or hit ENTER
> >
> > Go to Start>Run and key in:
> > regsvr32 wuapi.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 wups.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 wuaueng.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 wuaueng1.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 wucltui.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 wuweb.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 jscript.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 atl.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 softpub.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > regsvr32 msxml3.dll
> > Click on OK or hit ENTER
> > Click on OK in the RegSvr32 dialogue box
> >
> > Start>Run and key in:
> > net.exe start wuauserv
> >
> > Now try the Windows Update site.
> >
> >
> > Alternatively, you could create a command script file to run the above
> > commands in a Command Prompt window......
> >
> > Go to Start>Run
> > Key in:
> > cmd
> > Click on OK or hit ENTER
> >
> > In the Command Prompt window, key in:
> > notepad registerit.cmd
> > Hit ENTER
> >
> > A Notepad window will open with a dialogue box asking if you want to
create
> > a new file. Click on Yes in the dialogue box.
> >
> > Copy/paste the following, between but not including the asterisks, into
the
> > Notepad window:
> >
> > *********************
> > net stop wuauserv
> >
> > regsvr32 /s wuapi.dll
> >
> > regsvr32 /s wups.dll
> >
> > regsvr32 /s wuaueng.dll
> >
> > regsvr32 /s wuaueng1.dll
> >
> > regsvr32 /s wucltui.dll
> >
> > regsvr32 /s wuweb.dll
> >
> > regsvr32 /s jscript.dll
> >
> > regsvr32 /s atl.dll
> >
> > regsvr32 /s softpub.dll
> >
> > regsvr32 /s msxml3.dll
> >
> > net start wuauserv
> > **********************
> >
> > When finished pasting the above commands into the Notepad window, go to
> > File>Save then File>Exit.
> >
> > Back in the Command Prompt window, key in:
> > registerit.cmd
> > Then hit ENTER
> >
> > When the file is done running, and you're back at the C: prompt, key in:
> > exit
> > Then hit ENTER
> >
> > Now try the Windows Update site.
> >
> >
> >
> > Regards,
> >
> >
> > --
> > Patti MacLeod
> > Microsoft MVP - Windows Shell/User
> > "Sunshine" <Sunshine@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:CA9EFC38-D048-4E98-BC08-93DF0C44F586@xxxxxxxxxxxxxxxx
> > > this is what i get when i log onto windows updates:
> > >
> > > Checking for the latest version of the Windows Update software...
> > >
> > > Depending on your connection speed, this might take a minute. During
this
> > > time, you may receive one or more security warnings. Review each
security
> > > warning to ensure that the content is signed by Microsoft, and then
click
> > > Install or Yes to install the software.
> > >
> > > i even had help from HP for 3 days and nothing got resolved. as last
> > resort
> > > i did a non-destructive recovery then tried to access it. it looked
like
> > it
> > > was gonna work but after clicking on yes or install nothing happened
and
> > it
> > > was back to square one. the updates i've gotten so far r from the
update
> > > catalog, but there i end up with ones i dont need yet. im working with
> > > windows XP SP1.
> > >
> > > i had no problems til a month ago when my system crashed for no
apparent
> > > reasons and went into a destructive recovery. i lost everything. since
> > then
> > > windows update and auto updates wont work. i also had windows XP SP2
on at
> > > that time. any help would be appreciated! i've pretty much given up on
> > > finding out what to do.
> > >
> > > thx
> >
> >
> >
> >
.
- Follow-Ups:
- References:
- windows update doesnt work at all, neither does auto updates
- From: Sunshine
- Re: windows update doesnt work at all, neither does auto updates
- From: Patti MacLeod
- Re: windows update doesnt work at all, neither does auto updates
- From: Sunshine
- windows update doesnt work at all, neither does auto updates
- Prev by Date: Re: JOKES zip file
- Next by Date: Re: Problem connect Windows UPDATE site
- Previous by thread: Re: windows update doesnt work at all, neither does auto updates
- Next by thread: Re: windows update doesnt work at all, neither does auto updates
- Index(es):
Relevant Pages
|
Loading
