Re: Remote Desktop Disconnected, protocol error

OK, here's an article describing this Event, with identical status
code:

You can not establish a Remote Desktop session to a computer
running one of the affected products.
http://support.microsoft.com/?kbid=555382

And on eventid.net
http://www.eventid.net/display.asp?eventid=1036&eventno=4243
&source=TermService&phase=1
someone wrote:

"In my case, I am running Windows Server 2003 and ISA Server 2006.
I created a publishing rule for the RDP protocol and used standard
ports. After I changed the incoming port in that rule, the issue
was corrected."

And here is the troubleshooting help from Microsoft:
http://technet.microsoft.com/en-us/library/cc775339.aspx

Everything seems to point in the direction of the port TS is
listening to.

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___

=?Utf-8?B?QiZHLUFkbWlu?= <BGAdmin@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote
on 14 dec 2008 in microsoft.public.windows.terminal_services:

Here is the error in the event viewer just before the problem
started. Since then it has not repeated and I see no new errors
after I try to make a connection.

Date: 12-10-08 Source: TermService
Time: 6:06:01 AM Category: None
Type: Error Event ID: 1036
User: N/A
Computer: BGC01
Description: The Terminal Server session creation failed. The
revelant status code was 0x2740.

"Vera Noest [MVP]" wrote:

Have you checked the EventLog on the server? Can you post the
EventID, Source and Description?

_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___

=?Utf-8?B?QiZHLUFkbWlu?= <BGAdmin@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote on 12 dec 2008 in
microsoft.public.windows.terminal_services:

I forgot to mention that I can make a connection to another
PC from the Server on the network with no problem. I cannot
make a connection from the server to itself. I get the same
protocol error.

"jolteroli" wrote:

we have had such an issue, because packets are lost on the
network. this is reproduceable by TMnetsim if you select a
loss
0%. the switch was the culprit.

please try to establish a rdp session from the console on
the TS to the TS itself. Hostname: localhost

-jolt

"B&G-Admin" <B&G-Admin@xxxxxxxxxxxxxxxxxxxxxxxxx> schrieb im
Newsbeitrag
news:042D34C9-4815-4024-AF45-08C879F581D2@xxxxxxxxxxxxxxxx
After running MS update I cannot use remote desktop to
login the my windows
Server 2003 R2.

I have uninstalled the updates that were installed hoping
connectivity would
be restored but I still receive the following error.
"Because of a protocol error, ths session will be
disconnected. Please try connecting to the remote computer
again."

I have tried to make a connection from machines running XP
SP2, XP SP3 and Vista Ultimate. All result in the same
error.

I searced the forums to find a solution and have reemoved
and recreated the
connection in Terminal Services configuration. I have also
downloaded and updated RDP clients to 6.0.

I have been searching for a fix for 2 days now. I need it
done like yesterday as none of the remote sites can get
connected to the server.
.

Relevant Pages

  • Re: Connecting a remote workstation to a domain
    ... If you have more than a couple of remote workstations connecting to the SBS ... server via VPN, you really need to consider a Terminal Server in the main ... "Log in using a dial up connection" checkbox, ... roaming profile then synchronizes with the server over the VPN); ...
    (microsoft.public.windows.server.sbs)
  • Re: Problem with Web based client
    ... Seems like you are having problems accessing the web server on the PC you ... > My remote desktop connection works fine when I connect with a Remote ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Remote Access and ISA Server in SBS 2003?
    ... I am glad to hear the Remote Access Wizard is working fine now. ... there is no difference in VPN between SBS 4.5 and SBS ... Error Message: VPN Connection Error 800: Unable to Establish Connection ... the external NIC of the SBS Server. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW Timing
    ... I understand that you want to monitor when and how ... > to an internal Windows XP or Terminal Server computer. ... SBS creates a connection to the internal client on port 3389 which is ... But it can not tell which one session from the RWW, ...
    (microsoft.public.windows.server.sbs)
  • RE: Remote access issues
    ... The remote connection session is disconnected or end is decided by ... when you restart the TS server. ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)