Re: Problems with the Windows 2003 License Server

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



i.edelmann@xxxxxxxxxxxxxx wrote on 20 feb 2007 in
microsoft.public.windows.terminal_services:

On 20 Feb., 14:09, i.edelm...@xxxxxxxxxxxxxx wrote:
On 19 Feb., 21:07, "Vera Noest [MVP]" <vera.no...@remove-





this.hem.utfors.se> wrote:
Everything is fine, and you will never see any of the
purchased licenses being issued.

Here's what happens:

* all clients connecting to the 2003 TerminalServerwill use a
Per User TS CAL. Since these Per User TS CALs are not
managed, you will not see them appear in the TS Licensing
Manager

* the clients connecting to the W2K TerminalServerare running
W2K Pro or XP Pro, and thus do not need a purchased TS CAL.
They receive a free TS CAL from the built-in pool. Check in
TS Licensing Manager the line that's called
"ExistingWindows2000 Per Device TS CALs Tokens)". So there
was no need to install the 200 Per Device TS CALs, since you
have no clients who need them. The only potential clients for
these TS CALs would be yourWindows CE thin clients, but they
connect only to the 2003 TS, according to your post.

Hope this reassures you that all is well. And be assured that
licensingproblemsare *always* recorded in the EventLog. No
news is good news, in this case!
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - TerminalServer
TS troubleshooting:  http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___

i.edelm...@xxxxxxxxxxxxxx wrote on 19 feb 2007 in
microsoft.public.windows.terminal_services:

I have the following problem. I build up a new
terminalserver farm based on W2k3 standard SP1 R2.
TheLicenseserver(also W2k3) was equipped with 400 TS Cals
(by user), terminal servers were led by Registry on some
dedicatedlicenseserver HKEY_LOCAL_MACHINE \ system \
services \ TermSrv \ parameter \ LicenseServers \ xxxxxxxx)
Now I had downgrade some of the W2k3 Servers for publishing
special application onWindows2000 Advanced SP4 - I
installed further 200 CALS per device, cause
theWindows2000Servercan´t use per user CALS.
The following Client systems join the farm:
- Published Application onWindows2000 servers -Windows
2000/WindowsXP Clients
- Published Desktop onWindowsof 2003 servers -Windows
2000/WindowsXP Clients/WindowsCE Clients
Unfortunately I can´t see any traffic on mylicenseserver
(Thelicenseserveris activated and registered - the CALS are
also registered and activated.
I have the following effect: I see no effect on using user
CALS anyway in alicenseserver, since these cannot be
indicated (confirmation comes from ms support an some
technical whitpapers) Also theWindows2000/WindowsXP of
devices does not pull a visuallicenseof theWindowsto 2000
servers (published Application) - that ´s also correct,
cause each WXP / W2k Client takes alicenseof the
openlicensefundus (right? - Information comes also from the
whitepapers) Only the ThinClient devices (Wyse V30
-WindowsCE 5.0) should get a permanentlicensefrom
theServer- but I can´t see any use in thelicenseconsole
Under W2k3 there is a tool in the resource kit called
Lizenztesttool tsctst.exe - unfortunately there is nothing
similar underWindows2000 -
To be safe, that a licenses will be pulled - Can I make a
test connection with the help of a Tool or "visualize" the
use of licenses on my W2k3 Licenseserver?
Thank you for the assistance
PS: It comes
a) no reference in the Eventlog of the respective terminal
servers, which would show me, that theserverpulls only
temporary licenses or something similar (also no reference
that thelicensein xx days runs off)
b) with the Lsview Tool I see that the
rightLicenseServerwill be pulled from each Terminalserver
c) Also on thelicenseserverno temporary licenses are
contained, which would show me, which is not correct

The Eventlogs on the Clients does not say nothing at all.
The Eventlogs on the terminal servers says only the
Eventlog entry 4193 Ms DTC was started with the following
attitudes (OUT = 0 and = a 1): Safety configuration:
Network administration of transactions = 0, Netzwerkclients
= 0, Detailed one distributed transactions with the help of
system MSDTC minutes = 0, Outgoing distributed transactions
with the help of system MSDTC minutes 0, Transaction
Internet Protocol (TIP) = 0, XA-transactions = 1 Filtering
of duplicated events = 1 Further information about the
assistance and support services receives you

Otherwise I tested the following scenarios today:
1. Scenario
Connection over aWindowsXP Client to a SecureGateway
(presentationserver4.0)
Via gateway, a published Desktop on aWindowsof 2003serveris
started Neither on my Client, nor on the terminalserver, a
reference in the Eventlog is shown - only information about
successful FolderRedirections, etc.
Also on thelicenseservershows no entry or a
temporarylicense (LICENSE00x)
2. Scenario
Connecting at a Wyse ThinClient (WindowsCE 5,0) over the
SecureGateway, start a published Desktops on aWindowsof
2003
server. Afterwards a session in session on a published
Application (which is installed on aWindows2000 Advanced
server) is started. Neither in the Eventlog, nor in the
Registry
a reference to a temporarylicense(neither on thelicense
server, the published desktopserveror the published
applicationserveris an entry). There´s also no entry in
the
licensemanager for the use of a DeviceCAL
All terminal servers are connected by LSView with the
correct
licenseserver
The only thing, which I did not make yet (because theserver
stands not in my administration), is the registry entry on
the site DC
(HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TermSe
rvice \Parameters\LicenseServers\xxxxxxx)
Otherwise I do not get not one information, neither
negative nor positive (even Citrix writes successfully in
the Eventlog, that thelicenseserveris successfully
addressed by CTX) Any help would be great
Thank you
Regards
Casey

Actually my problem is, that i´m not sure, if
thelicenseserver works correctly - i have no message, which
tells me, that something is not working, but the statement
of microsoft isn´t really satisfactoring. So i want to be
100% sure, that everything works fine :)- Zitierten Text
ausblenden -

- Zitierten Text anzeigen -

Cool,
it is now working ï?? i installed some 2003 ts cals per device
and
the
licenses will be given correctly to the clients.
Only one thing is not working:
I start a session over the thin client (connecting on W2k3
published desktop), after this, I start a session into session
on a Windows 2000 published application.
I got a temporary license on the Windows 2003 Server, where the
published app was started via the desktop. On the W2k Server,
the license server was hardcoded written in the registry under:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TermService
\Parameters
REG_SZ DefaultLicenseServer Name of the Server.
The X509 Cert will be pulled successfully from the server.
Is this parameter right?- Zitierten Text ausblenden -

- Zitierten Text anzeigen -

The other thing i have detect is, that after starting a
published application over a windows XP Prof Clientsystem on a
windows 2000 Server - the client system (winxp) also gets a
temorarily license (LICENSE000) - is this also correct or are
there probs with the license server - (again no information in
the eventlog and i can log on successfully to the app)

See my previous post. This is by design on the first connection.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
.



Relevant Pages

  • Re: CAL Q.
    ... > SBS licenses can be organized by user, device, or a combination of user ... Define that entity which you claim the server ... What if both user CALs and device CALs are used? ...
    (microsoft.public.windows.server.sbs)
  • Re: CAL
    ... If you just have the 5 CALs that came with the server, ... So SBS can tell which one you've bought based on the license code? ... You go and you buy 10, 'per user, CALs. ... it's up to you to keep track of the licenses. ...
    (microsoft.public.windows.server.sbs)
  • RE: CAL Q.
    ... The licenses are installed and the server will keep track of the concurrent ... Client Access Licenses (CALs) to choose from: ... employees that need access to the corporate network from mobile devices ...
    (microsoft.public.windows.server.sbs)
  • Re: Problems with the Windows 2003 License Server
    ... CALs Tokens)". ... Now I had downgrade some of the W2k3 Servers for publishing ... that a licenses will be pulled - Can I make a test ... server) is started. ...
    (microsoft.public.windows.terminal_services)
  • Re: CALs question
    ... That quote is something I tried to ask MS to change when SBS2k3 came out ... CALs and 1000's of users accessing the SBS from those 50 PCs. ... >> so can the number of users setup exceed the number of licenses? ... >> server software installed on a particular server. ...
    (microsoft.public.windows.server.sbs)