Re: Terminal Services Remote Admin

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Rob --

I checked the machine, it is not listening on port 3389. The service is not
running on the machine apparently.

I am screwed at this point, and have to reload the Server OS ?

Thanks for your help !

--Tim


"Robert L [MS-MVP]" wrote:

In this case, it is no thing to do with application mode or administrative mode. Make sure the port 3389 is listening using this command netstat -an |find /i "3389" on the server.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"Tim Stahl" <TimStahl@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:C5A2E47E-6B91-47FF-9873-978BDD43C960@xxxxxxxxxxxxxxxx
I have the remote administration mode enabled. I have checked the reg
entries, and everything appears to be in order. I have noticed that the
Terminal Services "service" is not listed in the Services Administrative
tools. It will not let me telnet to this host on port 3389. All it says is
connect failed.

Thanks.


--
Tim Stahl
Service Manager

FSU Computer Store /
FSU Campus Services
Tallahassee, FL 32306-2701
Voice: (850) 644 3388



"Robert L [MS-MVP]" wrote:

> assuming you have removed TS from the server, have you enable remote desktop? can you telnet port 3389? what's the error message?
>
> Troubleshooting terminal server issues Troubleshooting Terminal Server Issues. A new console session cannot be established Black screen while connecting to TS "Because of a network error, ...
> www.chicagotech.net/troubleshootingts.htm
>
>
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> "Tim Stahl" <Tim Stahl@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:62B8B398-F5F4-4312-88A3-6CC867F8167B@xxxxxxxxxxxxxxxx
> Hello all !
>
> I have a Windows 2000 Server box that *someone* set up to be a Application
> Server. It was suppossed to be in Remote Admin mode only. The 90 day trial
> has since passed, and it will no longer accept connections. My other sysadmin
> downgraded this box back to Remote Admin mode, but it still won't receive any
> connections !
>
> We have since purchased a 10CAL pack for Terminal Services, and have an
> Application Server running perfectly on this domain. However, I am still not
> able to get this box to run in Remote Admin mode.
>
> What can be done? Or even better, how can I find out why it isn't working?
>
> Thanks!
>
> --Tim
.

Relevant Pages

  • RE: Some technical errors
    ... If the SMTP server is not running on port 25 TCP it is not a public ... Manager - Computer Assurance Services BDO Chartered Accountants & ...
    (Security-Basics)
  • Re: SRV RRs support in Internet Explorer?
    ... The port number could be implicit (i.e. ... At any point in time, a server could fail ... can't effectively LB or backup because NSs cache the records for the TTL ... I still don't see how SRV records would help backup or LB. ...
    (microsoft.public.win2000.dns)
  • Re: Still cant connect to RWW or OWA remotely
    ... I get 'cannot find server or dns error' on both ... TCP [port number]> to open the ports. ... As for error messages when I fail to access RWW with the laptop, ... network, no connection seems possible. ...
    (microsoft.public.windows.server.sbs)
  • Re: cannot send mail from Windows mail
    ... When a username/password combination doesn't work in Windows Mail, ... I mean I dont use it but as outgoing address for my ISP account. ... youir username and password are correct for your mail server". ... Ask your home ISP if they support SMTP on a port other than 25. ...
    (microsoft.public.windows.vista.mail)
  • Re: How to trigger server to reattempt printer connection
    ... The spooler does not log any SNMP data. ... Best practices and known issues when you install Windows Server 2003 Service ... Before restarting the spooler next time, create a new port name to the ... This does not happen often, but when it does, it seems to stay offline ...
    (microsoft.public.windows.server.general)