Re: TS & Outlook (& DNS) related questions on new Win2k3 r2 server setup/install

Oops, I do have 1 follow up to the Outlook question. How do I move the
Outlook data from the local user to the domain user? Import/Export? Or is
there an easier way?
Thx.

DD

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66a25578caa838c2a93500@xxxxxxxxxxxxxxxxxxxxxxx
Hello Donna,

Nice to hear that you find it out. Thank you very much. :-)

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm

Hi Meinolf,

Before I tell you what I did, I want to tell you I'm OK if you laugh
:) &
you're a patient man!
The Watchguard router has 8 ports - 1 for the WAN & 7 for what
appeared to
be a switch. I had the WAN cable in port 1, a PC in port 2, & the
server in
port 3. It turns out that only port 2 works & is designed to uplink
to a
switch. Yet when I plug anything into ports 3 - 8 the lights come on
like
it's linked. So your 1st reaction was in the correct direction.
Everything
is OK now. (Perhaps I should stick to accounting ;-))
Anyway, if I have future questions I'll start a new post.

Regards,

DD

"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66a25448caa830f47bd9f0@xxxxxxxxxxxxxxxxxxxxxxx

Hello Donna,

Disable the firewall on command prompt:
netsh firewall set opmode mode = disable
or Start, control panel, windows firewall and disable it here.

For RRAS go Start, programs, administrative tools, routing and remote
access and just rightclick the servername, choose Disable Ruting and
remote access.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Hi,
The server is definitely not on the WAN port. Cable is good, LEDs
light up.
I got rid of the multihome, just using .3 on NIC2. I'm wondering if
it has
something to do with Win firewall &/or Routing & Remote Access which
I
think
I set up on accident during the install. How do I Uninstall or
Disable
those 2 things? Can it be something else?
Thx,
DD
"Meinolf Weber" <meiweb(nospam)@gmx.de> wrote in message
news:ff16fb66a24628caa754dad40108@xxxxxxxxxxxxxxxxxxxxxxx
Hello Donna,

Make sure that you not connect the server to an WAN port of the
router or a configuration port. Also check that the network cable
is not broken. On the NIC in the mahcine check that it is enabled
and the control LED is flashing. Do NOT multihome the DC, means to
NIC's with different ip's ton the same network.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties,
and
confers no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
Hi again,

If you have domain workstations and domain user accounts, your
users logon the same way with there domain account, when they are
at home. So you have only to setup ONE user account. The user
have to login one time to the domain, then they can also login at
home with username, password and logon to domain, NOT this
computer. Cached credentials on the workstation will store the
logon password so that they have no differences with working at
home.

OK, I'll try this after I get the server setup complete. Which
brings me to my next question...

As far as I can tell I setup the domain, AD, DNS, DHCP, server
roles,
etc.
The server has 2 NICs. I setup NIC2 originally w/ the following:
IP 192.168.100.3
Sub 255.255.255.0
GW 192.168.100.1 (the router)
DNS 192.168.100.3
But I can't even ping the router (.1)? My "lab" setup is as
follows:
A Watchguard router (with a built-in 8 port switch) connected to
the
internet
1 Win XP workstation Connected to router switch (No DHCP) IP info
192.168.100.17 GW 192.168.100.1 ISPs DNS IP
1 Win 2k3 server connected to router switch
The Win XP PC is working fine pinging & getting out to the
internet
(won't
ping the server however)
The server cannot ping anything nor get out to the internet
So I hooked up the 2nd NIC (really NIC1) and gave it IP
192.168.100.6
w/ same GW and DNS and still nothing? Any ideas?
Thx,
DD




.

Relevant Pages

  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: changed IP address: cant receive email & need to make domain name match IP address
    ... Port Forwarding for 2Wire 1701HG ... SBS CDs, but it's always a good idea to keep them handy. ... As you are set up now, your SBS server is "bare to the Internet" (not ... need to buy at least another inexpensive router to put between the SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: Help again please
    ... I assume this is your linux box. ... Port 80 is the port that a web server will run on such as apache. ... As a router can support multiple machines, ... a good firewall when setup correctly. ...
    (comp.os.linux.security)
  • Re: Cant connect to Mailserver
    ... domain's zone files on the dyndns server, ... I'm presuming it's a simple port forward from WAN to LAN on ... When I telnet to port 25 I should get a response from your ... Are the correct ports open in the router? ...
    (microsoft.public.windows.server.sbs)