Re: After setup, server cannot access network

Hello Pop,

Please post an ipconfig /all from the dns server and the new one. If you do niot use both NIC's with teaming disable the not used.NIC.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers no rights.

We have a Windows 2003 Standard R2 SP2 server just added to the
network. I have DNS, DHCP and AD running correct as far as I can tell.
All of this is running on a Dell PowerEdge 2800. I had help setting up
DNS and DHCP so I know those should be good. Though since the server
has 2 NIC cards, it is all pointing to one of the cards. When plugging
in the network cable to that card. Nothing happens - no internet, no
network, no nothing. When plugging the cable into the second card it
pulls the IP address from the NT4 DHCP service on the network, but
looks at 127.0.0.1 for DNS.

I am not sure where I went wrong, networking is a new skill set.



.

Relevant Pages

  • Re: 2 DNS, one machine
    ... What I'm trying to do is set up a small home network to teach myself ... >separate DNS server for every local subnet, ... >internet connection of course, then set up a NAT (network address ... >allows one DNS server to act like it is multiple servers. ...
    (Fedora)
  • Re: Can Not Ping By Name
    ... >>> Make sure there's no firewall packaged with the VPN client. ... >>DNS server is the same physical server as the Exchange, ... > Network problem solving - general advice: ...
    (microsoft.public.windowsxp.network_web)
  • Re: network has gone down again, and I cannot figure out why
    ... search dns: dns.asm.bellsouth.net ... try against the secondary DNS server address. ... up DHCP on this end and now I can email. ... DHCP just configures your side of the network with the data that the ...
    (Fedora)
  • Re: Cant join domain server
    ... It's a new network setup, ... > 'Preferred DNS Server' of a DNS server supporting the Active Directory ... able to ping the server from the client. ...
    (microsoft.public.windows.server.networking)
  • Re: Non-domain connection problem
    ... For some reason the DNS is persistent. ... connect new PC to the internet from the non-domain network: ... You said that you "hard coded the DNS server to a known DNS on the internet: ...
    (microsoft.public.windows.server.sbs)