Re: IP Address

In news:167B05DA-49FE-46D2-BE44-10D49C2EC736@xxxxxxxxxxxxx,
Zakaria <Zakaria@xxxxxxxxxxxxxxxxxxxxxxxxx> typed:
"Ace Fekay [MVP]" wrote:

In news:3DA1FEC7-EDFD-4D48-9078-AC5469313B65@xxxxxxxxxxxxx,
Zakaria <Zakaria@xxxxxxxxxxxxxxxxxxxxxxxxx> typed:
Hello ACE

The server has only 1 NIC but there isspace to add on. I do have
ISA2006 but it is not installed as yet. The Router is an ADSL router
with NAT capability. The router is connected to the main network
switch and not directly to the server. I am not sure if it can allow
internal services. The ADSL router is a make is Mecer and model is
ART514CX.
There is a link with more info,
http://e.mecer.com/productinfo/56K_V90_ISDN_ADSL_Fax_Modem/art514cx.html

Thanks
Zakaria

Hmm, the link is only a sell *** without any specifics about
administration. Do you have the docs that came with it? WHen you log
into it using the IP address in a browser, is there an admin link or
application/gaming link?

Ace


Hello Ace

Here is more info about the router:

Model name: ART514CX
General Descriptions
ART514CXU full rate ADSL router is a full-featured ADSL router that
provides Ethernet direct connections to individual PCs or local area
network with 10/100 Base-T Ethernet. ART514CXU uses advanced ADSL
chipset solution with complete set of industry standard features for
high-speed Internet access. ART514CXU offers easy installation and
cost-effective connection for SOHO and residential users. To benefit
users' access to the Internet, 4-port 10/100Mbps Ethernet switch hub
is equipped with this ADSL router. Also the feature-rich routing
functions are seamlessly integrated to ADSL service for existing
corporate or home users.
This product is made in ISO9001 approved factory. ART514CXU ADSL
Router complies with FCC part15 regulations and CE approval.

Features and Benefits
? IEEE 802.3 and 802.3u compliance
? Full rate operation with up to 8 Mbps downstream data rate and up
to 1
Mbps upstream data rate enables High-speed access to ISP or corporate
network ? Friendly GUI Configuration and Management software
? Supports ADSL always-on
? Ongoing feature enhancements through Telnet / FTP/ Web download or
upload of new firmware and configuration files
? Supports full VPI range (8 bits, 0-255) and VCI range (16 bits,
0-65535) over PVC.
? Enables end-to-end ATM support, which allows traffic management and
QoS.
? Built-in DHCP server automatically assigns IP addresses to all
workstations on your LAN.
? All management and monitoring can be done through Telnet session.

Applications
? High-speed Internet access sharing
? Video-On-Demand
? Telecommuting
? Distance learning
? Remote workgroup networking
? E-Commerce
? Video conferencing

Software

ADSL Compliant
? ANSI T1.413 issue 2
? ITU G.dmt (G.992.1)
? ITU G.lite (G.992.2)
? G.994.1 (G.hs, Multimode)
? ADSL over POTS (Annex A) or ADSL over ISDN (Annex B / UR2)
? Tone detection for low power mode
? Maximum downstream rate up to 8 Mbps
? Maximum upstream rate up to 1 Mbps

ATM
? ATM Forum UNI 3.1/4.0 PVC
? Up to 8 VCs (Virtual Circuit)
? ATM SAR (Segmentation and Reassembly)
? ATM supports AAL5, UBR & CBR
? RFC 2516 (PPP over Ethernet)
? RFC 2364 (PPP over ATM)
? RFC 1577 (Classical IP over ATM)
? RFC 1483 BPDU (Bridge Ethernet over ATM)
? OAM F4 and F5 segment end-to-end loopback (F4 on all VPIs, F5 on
VPI 0 only)

Bridging / Routing
? Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
? Supports up to 128 MAC learning address
? IP routing-RIPv2 (backward compatible with RIPv1)
? Static routing
? DHCP (Dynamic Host Configuration Protocol) Server and Client
? NAPT (Network Address and Port Translation)
? NAT (Network Address Translation)
? PAT (Port Address Translation)
? ICMP (Internet Control Message Protocol)
? IGMP (Internet Group Management Protocol)
? Simultaneous USB and Ethernet operation
Security
? PAP (Password Authentication Protocol)
? CHAP (Challenge Authentication Protocol)
? User authentication for PPP
? Password Protected System Management
? Firewall

HTTP Web-based management
? Firmware upgrade via FTP / Telnet / Web
? Configuration of NAT/NAPT
? WAN and LAN connection statistics
? Selection of Bridge or Router Mode
? Configuration of VCs (Virtual Circuits)
? Customized Web pages

Hardware

Interface
? Compliant with USB v1.1, full speed (12Mbps)
? Four RJ45 ports compatible with IEEE 802.3/802.3u, 10/100Mbps auto
selection ? One RJ11 port for ADSL connection
? One reset button for restoration of factory default setting

Supported OS
Windows 9X, ME, 2000, and XP

Power Requirement
Power Adapter: Input 110 10 or 230 10 VAC, Output 9VAC 1000mA
Power Consumption: less than 10 Walt

Environmental
? Operating temperature: 0°C ~ 70°C ambient
? Humidity: 5 % ~ 95 % (non-condensing)
? Storage temperature: -40°C ~ 70°C

Physical
? Front Panel: 7 LEDs


? Back Panel

? Dimension: 155mm(length) x 96mm (width) x 32mm (height)
? Net weight: 400g

Certification
? FCC part 15, CE mark

Well, then, apparently it does, but this is still a sell-***. Do you have
the device's instruction manual?

If you DO NOT have the book for this unit, download this user manual for the
ART18CX at this site and check to see if the screens and commands look/are
the same.
http://www.mercury-pc.com/downloads_list.php?productid=376


Ace


.