W2K3 Server and NEC Multispin 4x4 changer

I am setting up a web server using Win2003 and have just installed an
NEC Multispin 4x4 CD changer. It's old and slow, but not slow compared
to Internet connections. My problem is that the computer is only
recognizing the first drive in the changer. There are 4 drives. I
haven't had this happen on another computer.

When booting up the computer identifies the drive as an NEC 251 drive.
That is what shows up in Device Manager. FYI, the device is a slave on
my second drive controller. Don't want to move it since the other
drives have been used to install applications that expect to find the
drives where the were at install.

Any ideas?

Thanks,
Jay
.

Relevant Pages

  • Re: Installing Fedora without a CDROM: my HOWTO
    ... Here is my HOWTO on installing Linux from a USB drive, ... disk or USB key rather than a CDROM boot disk. ... Put auxillary files (special drivers, post setup install config, ... This way I can mount any number of hard drives in the ...
    (Fedora)
  • Re: Booting Vista from external drive violate MS EULA?
    ... of OS install to diff drives. ... Meaning this boots off usb vista, if there is another hard drive ...
    (microsoft.public.windows.vista.general)
  • Re: XP HOME BOOT FAILURE
    ... I did check both hard drives using the setup CD ROM that came with the new ... downloaded and updated the driver for the original 80 GB Maxtor hard drive. ... > If you run a repair install as I initially described, ... >>> on, follow the screens. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Quiet general purpose + music laptops?
    ... Without being able to convert a distro into a bootable USB flash /SD Card, ... So I would recommend all distro mainters look at their netbook ... Install gparted on your machine using synaptic. ... As the pocket drives cost only 40 pounds, ...
    (uk.comp.os.linux)
  • Trouble installing Redhat 9.0 on Promise FastTrak100 TX2 RAID controller, RAID1 mirrored - solved
    ... a computer with mirrored 120 GB IDE drives on a Promise ... installed the Promise driver for Windows, ... refuses to boot to the Linux boot partition, ... The next time I tried the install, ...
    (comp.os.linux.hardware)
Loading