Re: STOP 0x00000007B error after installing new RAID controller

Hello Matthias,
Start with these articles: There are things that should be done or
considered when attempting this.
263532 How to perform a disaster recovery restoration of Active Directory
on a computer with a different hardware configuration
http://support.microsoft.com/default.aspx?scid=kb;EN-US;263532


249694 How to move a Windows installation to different hardware
http://support.microsoft.com/default.aspx?scid=kb;EN-US;249694

Thanks,
Darrell Gorter[MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights
--------------------
<From: "Matthias Claes" <matthias(-dot-)claes@stadsbader(-dot-)com>
<References: <uHPlFcTwGHA.1956@xxxxxxxxxxxxxxxxxxxx>
<OaJHSKUwGHA.3364@xxxxxxxxxxxxxxxxxxxx>
<Subject: Re: STOP 0x00000007B error after installing new RAID controller
<Date: Wed, 16 Aug 2006 16:56:16 +0200
<Lines: 57
<X-Priority: 3
<X-MSMail-Priority: Normal
<X-Newsreader: Microsoft Outlook Express 6.00.2900.2869
<X-RFC2646: Format=Flowed; Response
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2962
<Message-ID: <OBEphQUwGHA.4512@xxxxxxxxxxxxxxxxxxxx>
<Newsgroups: microsoft.public.windows.server.setup
<NNTP-Posting-Host: 217.136.171.116
<Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
<Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.setup:21542
<X-Tomcat-NG: microsoft.public.windows.server.setup
<
<The server runs Exchange and is an AD domain controller (Windows 2003 SP1).
<Will the configuration be preserved when choosing Repair?
<
<Matthias Claes
<Stadsbader-Flamand NV
<matthiasclaes(-at-)hotmail(-dot-)com
<
<"Miha Pihler [MVP]" <mihap-news@xxxxxxxxxxx> schreef in bericht
<news:OaJHSKUwGHA.3364@xxxxxxxxxxxxxxxxxxxxxxx
<> Hi,
<>
<> You could try with repair option. Put Installation CD into the server
and
<> boot from CD. When you get to installation options choose "R" - Repair.
<>
<> If at some point during the boot from CD you get an error that no mass
<> storage device could be found reboot again from CD and press F6 for
<> additional drivers. Now the set up will ask you for floppy disk for
<> drivers for new mass storage device and once you provide new drivers
again
<> choose repair option.
<>
<> --
<> Mike
<> Microsoft MVP - Windows Security
<>
<> "Matthias Claes" <matthias(-dot-)claes@stadsbader(-dot-)com> wrote in
<> message news:uHPlFcTwGHA.1956@xxxxxxxxxxxxxxxxxxxxxxx
<>> Our HP Proliant ML350 had a HP Smart Array 532 controller.
<>> There are 5 disks connected to the controller 2x RAID1 + 3x RAID5.
<>> Windows Server is installed on the RAID1 volume.
<>>
<>> This weekend, the controller failed.
<>> Because the SA-532 is retired by HP, we had it replaced with a Smart
<>> Array 642.
<>> The new controller is recognized upon boot, it finds the RAID volumes
and
<>> starts to boot Windows Server.
<>> The Windows startup screens comes up (I even have the chance to press
F8
<>> if I want to), fior a split second
<>> and then a stop error occurs:
<>> STOP: 0x00000007B (0XF68C2A98, 0xC00000034, 0x00000000, 0x00000000)
<>>
<>> I know this has something to do with Windows to being able to find the
<>> driver for the new card (or not being able to find the old card).
<>> However, because the old card is broken, I was not able the driver for
<>> the SA-642 in the OS while it was still running.
<>>
<>> Is there a way to fix this situation?
<>>
<>> Matthhias Claes
<>> Stadsbader-Flamand NV
<>> matthiasclaes-at-hotmail-dot-com
<>> (de server is our Exchange server, so our corporate mail is down right
<>> now)
<>>
<>
<>
<
<
<

.

Relevant Pages

  • Re: changing PCs
    ... Thus the failure to load Windows ... licenced to move that Xp system to an upgraded environment [motherboard, ... controller for the new motherboard. ... target disk controller in the old system and install the drivers for the ...
    (microsoft.public.windowsxp.hardware)
  • Re: RIS "unable to format partition" error
    ... I am using a Windows 2003 server as my ... drivers are incorrect. ... an RIS Installation" the microsoft page that deals with this is currently ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Can logon my computer
    ... Once you've launched Windows, though, Windows can't ... find the appropriate driver for your boot device. ... The drivers for that controller got trounced and had to ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Windows 2000 Advanced Server Wont Work RIght On Dell Dimension 3000
    ... Just because a device has drivers for Windows 2000 does not mean that the ... drivers will install under Windows 2000 Server. ... The punch line here is that before acquiring hardware, ...
    (alt.sys.pc-clone.dell)
  • Re: Printers not clearing out
    ... We have a problem that when a user logs out from the terminal server the ... built in drivers or WHQL drivers provided by the manufacturer. ... Windows Built-in PCL or PS Drivers - Version "Windows 2000, ...
    (microsoft.public.windows.terminal_services)