Re: STOP 0x00000007B error after installing new RAID controller

Hi,

You could try with repair option. Put Installation CD into the server and
boot from CD. When you get to installation options choose "R" - Repair.

If at some point during the boot from CD you get an error that no mass
storage device could be found reboot again from CD and press F6 for
additional drivers. Now the set up will ask you for floppy disk for drivers
for new mass storage device and once you provide new drivers again choose
repair option.

--
Mike
Microsoft MVP - Windows Security

"Matthias Claes" <matthias(-dot-)claes@stadsbader(-dot-)com> wrote in
message news:uHPlFcTwGHA.1956@xxxxxxxxxxxxxxxxxxxxxxx
Our HP Proliant ML350 had a HP Smart Array 532 controller.
There are 5 disks connected to the controller 2x RAID1 + 3x RAID5.
Windows Server is installed on the RAID1 volume.

This weekend, the controller failed.
Because the SA-532 is retired by HP, we had it replaced with a Smart Array
642.
The new controller is recognized upon boot, it finds the RAID volumes and
starts to boot Windows Server.
The Windows startup screens comes up (I even have the chance to press F8
if I want to), fior a split second
and then a stop error occurs:
STOP: 0x00000007B (0XF68C2A98, 0xC00000034, 0x00000000, 0x00000000)

I know this has something to do with Windows to being able to find the
driver for the new card (or not being able to find the old card).
However, because the old card is broken, I was not able the driver for the
SA-642 in the OS while it was still running.

Is there a way to fix this situation?

Matthhias Claes
Stadsbader-Flamand NV
matthiasclaes-at-hotmail-dot-com
(de server is our Exchange server, so our corporate mail is down right
now)



.

Relevant Pages

  • Re: Changing Hardware Platform
    ... > driver structure then one finds that there are just a few IDE drivers. ... You can't expect PnP to solve your boot controller issue. ... Server 2003 at the moment much. ... >> can be lifted that way unless the controller, drives and Hotswap Chassis ...
    (microsoft.public.windows.server.sbs)
  • Re: Boot up problem... with a difference
    ... You should not be touching the Registry. ... These drivers> Amyuni Document Converter. ... What Windows XP CD do you have? ... Safe mode boot is fine. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Boot from SCSI drive: Driver?
    ... 1- The boot order and boot device is set in the BIOS of the computer. ... specific to Windows, it applies to any operating system. ... operating system loader is ntldr. ... Device drivers with these values are ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Boot problem/failure small business server 2003 SP 2
    ... Windows 2003 installation. ... How to troubleshoot startup problems in Windows Server 2003 ... And when done so after F8, cannot boot in any ... Drectory Services Repair Mode:: runs, shows, Windows starting ...
    (microsoft.public.windows.server.sbs)
  • Re: RIS "unable to format partition" error
    ... I am using a Windows 2003 server as my ... drivers are incorrect. ... an RIS Installation" the microsoft page that deals with this is currently ...
    (microsoft.public.windowsxp.setup_deployment)