Re: Unattended Install and third-party storage drivers

Tech-Archive recommends: Fix windows errors by optimizing your registry

Things are working better now, but not completely solved. . .I am now
getting a STOP error blue screen. It is an INACCESSIBLE_BOOT_DEVICE error
0x0000007B.

Any ideas?

Thanks!

Jeff

"Johan Arwidmark" <anonymous@xxxxxxxxxxxxxx> wrote in message
news:bh0kp11crono6e55bnsntseu5f4ngg1a99@xxxxxxxxxx
> Here is a working txtsetup.oem file...
>
> You can strip out the additional adapters in it...
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Section: Disks
> #//
> [Disks]
> d1 = "IBM x440\x445 HAL", \halx44n.dll, \
> d2 = "Adaptec SAS/SATA Driver v1.00 (Windows 32 bit for
> 2000/XP/2003)", \adp94xx.sys, \
> d3 = "Adaptec Embedded Serial ATA HostRAID Driver Ver 4.00 for Windows
> 2000/XP/2003", \aarich.sys, \
> d4 = "Adaptec SATA Driver v1.00 (Windows 32 bit for 2000/XP/2003)",
> \adpAHCI.sys, \
> d5 = "Adaptec HostRAID U320 Driver Ver 3.00 For Windows 2000/XP/2003",
> \a320raid.sys, \
> d6 = "Adaptec Ultra320 Family Manager Set - Microsoft Disk",
> \adpu320.sys, \
> d7 = "LSI MegaRAID IDE Driver Diskette", \MegaIDE.sys, \
> d8 = "QLogic Software Diskette", \ql4010.sys, \
> d9 = "IBM Integrated xSeries Adapter Installation Disk (SCSI)",
> \QVNDSCSI.SYS, \
> d10 = "LSI Logic PCI SCSI/FC MPI Miniport Driver", \symmpi.sys, \
> d11 = "QLogic Software Diskette", \ql2200.sys, \
> d12 = "QLogic Software Diskette", \ql2300.sys, \
> d13 = "Silicon Image SiI 3x12 SATALink Driver Installation Disk",
> \si3112.sys, \
> d14 = "Adaptec SAS RAID Windows 2003 Device Driver", \arcsas.sys, \
> d15 = "Adaptec RAID Windows 2000/XP/2003 Device Drivers", \aac.sys, \
> d16 = "IBM ServeRAID Device Driver Diskette", \nfrd960.sys, \
> d17 = "Smart Array 5x and 6x Driver Diskette",\cpqcissm.sys,\
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Section: Defaults
> #//
> [Defaults]
> scsi = ADAPTEC_SASRAID
> computer = ibmhal_mp
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Section: scsi
> #//
> [scsi]
> ADAPTEC_SASRAID = "Adaptec SAS/SATA driver for Windows 2000/XP/2003"
> ADAPTEC_SATARAID_W2K = "Adaptec Embedded Serial ATA HostRAID Driver
> For Windows 2000/XP/2003"
> ADAPTEC_AHCIRAID = "Adaptec SATA HostRAID driver for Windows
> 2000/XP/2003"
> ADAPTEC_U320RAID_W2K = "Adaptec HostRAID U320 Driver Ver 3.00 For
> Windows 2000/XP/2003"
> a79xxNT50 = "Adaptec Ultra320 SCSI Cards (Win 2000)"
> a79xxNTIA32 = "Adaptec Ultra320 SCSI Cards (Win XP/Server 2003 IA-32)"
> MegaIDE100_NET = "LSI MegaRAID IDE 100 Controller(Server 2003)",
> MEGAIDE
> MegaIDE100_NETIDC = "Integrated Ultra ATA-100 Dual Channel
> Controller(Server 2003)", MEGAIDE
> MegaIDE100_NETI = "Integrated Ultra ATA-100 IDE RAID Controller
> (Server 2003)", MegaIDE
> MegaIDE100_MZ3_NET = "LSI Logic MegaRAID IDE 100 Driver For MAGNIA
> Z3x0 (Server 2003)", MEGAIDE
> MegaIDE100_MZ5_NET = "LSI Logic MegaRAID IDE 100 Driver For MAGNIA
> Z500 (Server 2003)", MEGAIDE
> MegaIDE133_NET = "LSI MegaRAID IDE 133 Controller (Server 2003)",
> MEGAIDE
> MegaIDE_SATA_NET = "LSI MegaRAID Serial ATA Controller (Server 2003)",
> MEGAIDE
> MegaIDE_LSICSB6_NET = "LSI Logic CSB-6 IDE 100 RAID Controller (Server
> 2003)", MEGAIDE
> MegaIDE_IBMCSB6_NET = "IBM CSB-6 IDE 100 RAID Controller (Server
> 2003)", MEGAIDE
> OEMSCSI = "QLogic iSCSI Adapter"
> QVNDSCSI_2689 = "IBM 2689 Integrated xSeries Adapter SCSI Driver"
> SYMMPI_32 = "LSI Logic PCI SCSI/FC MPI Driver (Server 2003
> 32-bit)",symmpi
> OEMSCSI2 = "QLogic QLA2200 PCI Fibre Channel Adapter"
> OEMSCSI3 = "QLogic Fibre Channel Adapter"
> Si3112_XP = "Silicon Image SiI 3x12 SATALink Controller for Windows
> XP/Server 2003"
> Si3112_NT = "Silicon Image SiI 3x12 SATALink Controller for Windows NT
> 4.0 and 2000"
> arcsas = "Adaptec SAS RAID Controller", arcsas
> aac = "Adaptec RAID Controller", aac
> NFRDDotNet32 = "IBM ServeRAID 4Mx/4Lx/5i/6M/6i/7k Controller (Windows
> Server 2003)"
> cpqcissm = "Smart Array 5x and 6x Driver Windows Server 2003"
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Section: computer
> #//
> [computer]
> ibmhal_mp = "IBM eServer xSeries 440/445 (Windows Server 2003 HAL)"
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec SAS/SATA driver for Windows 2000/XP/2003
> #//
> [Files.scsi.ADAPTEC_SASRAID]
> driver = d2, adp94xx.sys, adp94xx
> inf = d2, adp94xx.inf
> catalog = d2, adp94xx.cat
>
>
> [Config.adp94xx]
> value = "", Group, REG_SZ, "SCSI Miniport"
> value = "", Start, REG_DWORD, 0
> value = "", Tag, REG_DWORD, 1
> value = "", Type, REG_DWORD, 1
>
>
> [HardwareIds.scsi.ADAPTEC_SASRAID]
> id = "PCI\VEN_9005&DEV_041f", "adp94xx"
> id = "PCI\VEN_9005&DEV_0410", "adp94xx"
> id = "PCI\VEN_9005&DEV_0412","adp94xx"
> id = "PCI\VEN_9005&DEV_041E","adp94xx"
> id = "PCI\VEN_9005&DEV_0430","adp94xx"
> id = "PCI\VEN_9005&DEV_0432","adp94xx"
> id = "PCI\VEN_9005&DEV_043E","adp94xx"
> id = "PCI\VEN_9005&DEV_043F","adp94xx"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec Embedded Serial ATA HostRAID Driver For Windows
> 2000/XP/2003
> #//
> [Files.scsi.ADAPTEC_SATARAID_W2K]
> driver = d3, aarich.sys, aarich
> inf = d3, aarich.inf
> inf = d3, aichmgt.inf
> catalog = d3, aarich.cat
> catalog = d3, aichmgt.cat
>
>
> [Config.aarich]
> value = "", Group, REG_SZ, "SCSI Miniport"
> value = "", Start, REG_DWORD, 0
> value = "", Tag, REG_DWORD, 1
> value = "", Type, REG_DWORD, 1
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec SATA HostRAID driver for Windows 2000/XP/2003
> #//
> [Files.scsi.ADAPTEC_AHCIRAID]
> driver = d4, adpAHCI.sys, adpAHCI
> inf = d4, adpAHCI.inf
> catalog = d4, adpAHCI.cat
>
>
> [Config.adpAHCI]
> value = "", Group, REG_SZ, "SCSI Miniport"
> value = "", Start, REG_DWORD, 0
> value = "", Tag, REG_DWORD, 1
> value = "", Type, REG_DWORD, 1
>
>
> [HardwareIds.scsi.ADAPTEC_AHCIRAID]
> id = "PCI\VEN_8086&DEV_2652", "adpAHCI"
> id = "PCI\VEN_8086&DEV_27C3", "adpAHCI"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec HostRAID U320 Driver Ver 3.00 For Windows 2000/XP/2003
> #//
> [Files.scsi.ADAPTEC_U320RAID_W2K]
> driver = d5, a320raid.sys, a320raid
> inf = d5, a320raid.inf
> inf = d5, adhraid.inf
> catalog = d5, a320raid.cat
> catalog = d5, adhraid.cat
>
>
> [Config.a320raid]
> value = "", Group, REG_SZ, "SCSI Miniport"
> value = "", Start, REG_DWORD, 0
> value = "", Tag, REG_DWORD, 1
> value = "", Type, REG_DWORD, 1
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec Ultra320 SCSI Cards (Win 2000)
> #//
> [Files.scsi.a79xxNT50]
> driver = d6, adpu320.sys, adpu320
> inf = d6, adpu320.inf
> catalog = d6, adpu320.cat
>
>
> [Config.adpu320]
> value = "", tag, REG_DWORD, 20
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec Ultra320 SCSI Cards (Win XP/Server 2003 IA-32)
> #//
> [Files.scsi.a79xxNTIA32]
> driver = d6, adpu320.sys, adpu320
> inf = d6, adpu320.inf
> catalog = d6, adpu320.cat
>
>
> [HardwareIds.scsi.a79xxNTIA32]
> id = "PCI\VEN_9005&DEV_801D", "adpu320"
> id = "PCI\VEN_9005&DEV_801E", "adpu320"
> id = "PCI\VEN_9005&DEV_801F", "adpu320"
> id = "PCI\VEN_9005&DEV_800F", "adpu320"
> id = "PCI\VEN_9005&DEV_800F&SUBSYS_005F9005", "adpu320"
> id = "PCI\VEN_9005&DEV_8000&SUBSYS_00609005", "adpu320"
> id = "PCI\VEN_9005&DEV_8010&SUBSYS_00409005", "adpu320"
> id = "PCI\VEN_9005&DEV_8011&SUBSYS_00419005", "adpu320"
> id = "PCI\VEN_9005&DEV_8012&SUBSYS_00429005", "adpu320"
> id = "PCI\VEN_9005&DEV_8014&SUBSYS_00449005", "adpu320"
> id = "PCI\VEN_9005&DEV_8015&SUBSYS_00409005", "adpu320"
> id = "PCI\VEN_9005&DEV_8016&SUBSYS_00409005", "adpu320"
> id = "PCI\VEN_9005&DEV_8017&SUBSYS_00449005", "adpu320"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI MegaRAID IDE 100 Controller(Server 2003)
> #//
> [Files.scsi.MegaIDE100_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [Config.MEGAIDE]
> value = "", Tag, REG_DWORD, 1
>
>
> [HardwareIds.scsi.MegaIDE100_NET]
> id="PCI\VEN_1095&DEV_0649&SUBSYS_0649101E", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Integrated Ultra ATA-100 Dual Channel Controller(Server 2003)
> #//
> [Files.scsi.MegaIDE100_NETIDC]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE100_NETIDC]
> id="PCI\VEN_1095&DEV_0649&SUBSYS_005D0E11", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Integrated Ultra ATA-100 IDE RAID Controller (Server 2003)
> #//
> [Files.scsi.MegaIDE100_NETI]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE100_NETI]
> id="PCI\VEN_1095&DEV_0649&SUBSYS_007E0E11", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z3x0 (Server 2003)
> #//
> [Files.scsi.MegaIDE100_MZ3_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE100_MZ3_NET]
> id="PCI\VEN_1095&DEV_0649&SUBSYS_0649101E", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z500 (Server 2003)
> #//
> [Files.scsi.MegaIDE100_MZ5_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI MegaRAID IDE 133 Controller (Server 2003)
> #//
> [Files.scsi.MegaIDE133_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE133_NET]
> id="PCI\VEN_1095&DEV_0680&SUBSYS_05241000", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI MegaRAID Serial ATA Controller (Server 2003)
> #//
> [Files.scsi.MegaIDE_SATA_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE_SATA_NET]
> id="PCI\VEN_1095&DEV_3112&SUBSYS_05341000", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI Logic CSB-6 IDE 100 RAID Controller (Server 2003)
> #//
> [Files.scsi.MegaIDE_LSICSB6_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE_LSICSB6_NET]
> id="PCI\VEN_1166&DEV_0213&SUBSYS_02131000", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// IBM CSB-6 IDE 100 RAID Controller (Server 2003)
> #//
> [Files.scsi.MegaIDE_IBMCSB6_NET]
> driver = d7, MegaIDE.sys, MEGAIDE
> inf = d7, MegaIDE.inf
> inf = d7, NODEV.inf
> catalog = d7, MegaNET.cat
>
>
> [HardwareIds.scsi.MegaIDE_IBMCSB6_NET]
> id="PCI\VEN_1166&DEV_0213&SUBSYS_02131014", "MEGAIDE"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// QLogic iSCSI Adapter
> #//
> [Files.scsi.OEMSCSI]
> driver = d8, ql4010.sys, ql4010
> inf = d8, ql4010.inf
> catalog = d8, ql4010.cat
> inf = d8, qlpseudo.inf
> driver = d8, ql4010pp.dll, QL4010PP
> driver = d8, cocpyinf.dll, COCPYINF
>
>
> [Config.ql4010]
>
>
> [Config.QL4010PP]
>
>
> [Config.COCPYINF]
>
>
> [Config.OEMSCSI]
> value = Parameters\Device,DriverParameters,REG_SZ,""
> value = Parameters\Device,MaximumSGList,REG_DWORD,0x21
> value = Parameters\Device,NumberOfRequests,REG_DWORD,0xff
> value = Parameters\PnPInterface,5,REG_DWORD,1
>
>
> [HardwareIds.scsi.OEMSCSI]
> id = "PCI\VEN_1077&DEV_4010&SUBSYS_01121077", "ql4010"
> id2 = "PCI\VEN_1077&DEV_4010&SUBSYS_01141077", "ql4010"
> id3 = "PCI\VEN_1077&DEV_4010&SUBSYS_011E1077", "ql4010"
> id4 = "PCI\VEN_1077&DEV_4010&SUBSYS_01201077", "ql4010"
> id5 = "PCI\VEN_1077&DEV_4010&SUBSYS_02CF1014", "ql4010"
> id6 = "PCI\VEN_1077&DEV_4010&SUBSYS_02D01014", "ql4010"
> id7 = "PCI\VEN_1077&DEV_4010&SUBSYS_02E01014", "ql4010"
> id8 = "PCI\VEN_1077&DEV_4010&SUBSYS_02E21014", "ql4010"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// IBM 2689 Integrated xSeries Adapter SCSI Driver
> #//
> [Files.scsi.QVNDSCSI_2689]
> driver = d9, QVNDSCSI.SYS, QVNDSCSI
> catalog = d9, QVNDSCSI.CAT
> inf = d9, QVNDSCSI.INF
>
>
> [Config.QVNDSCSI]
> value = "",tag,REG_DWORD,1
> value = "",Group,REG_SZ,"SCSI Miniport"
> value = Parameters\PnPInterface,5,REG_DWORD,1
>
>
> [HardwareIds.scsi.QVNDSCSI_2689]
> id = "PCI\VEN_1014&DEV_013A&SUBSYS_013D1014","QVNDSCSI"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// LSI Logic PCI SCSI/FC MPI Driver (Server 2003 32-bit)
> #//
> [Files.scsi.SYMMPI_32]
> driver = d10, symmpi.sys, SYMMPI
> inf = d10, symmpi.inf
> catalog = d10, mpi2k332.cat
>
>
> [Config.SYMMPI]
> value = Parameters\PnpInterface,5,REG_DWORD,1
>
>
> [HardwareIds.scsi.SYMMPI_32]
> id = "PCI\VEN_1000&DEV_0621", "symmpi"
> id = "PCI\VEN_1000&DEV_0622", "symmpi"
> id = "PCI\VEN_1000&DEV_0624", "symmpi"
> id = "PCI\VEN_1000&DEV_0626", "symmpi"
> id = "PCI\VEN_1000&DEV_0628", "symmpi"
> id = "PCI\VEN_1000&DEV_0030", "symmpi"
> id = "PCI\VEN_1000&DEV_0032", "symmpi"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// QLogic QLA2200 PCI Fibre Channel Adapter
> #//
> [Files.scsi.OEMSCSI2]
> driver = d11, ql2200.sys, ql2200
> inf = d11, ql2200.inf
> catalog = d11, ql2200.cat
> driver = d11, qlsdm.dll, QLSDM
>
>
> [Config.ql2200]
>
>
> [Config.QLSDM]
>
>
> [Config.OEMSCSI2]
> value = Parameters\Device,DriverParameters,REG_SZ,"UseSameNN=1"
> value = Parameters\Device,MaximumSGList,REG_DWORD,0x21
> value = Parameters\Device,NumberOfRequests,REG_DWORD,0x96
> HKLM,SOFTWARE\SNIA\HBA\QL2X00,LibraryFile,0x00000000,"%dll%\qlsdm.dll"
> value = Parameters\PnPInterface,5,REG_DWORD,1
>
>
> [HardwareIds.scsi.OEMSCSI2]
> id = "PCI\VEN_1077&DEV_2200&SUBSYS_00021077", "ql2200"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// QLogic Fibre Channel Adapter
> #//
> [Files.scsi.OEMSCSI3]
> driver = d12, ql2300.sys, ql2300
> inf = d12, ql2300.inf
> catalog = d12, ql2300.cat
> inf = d12, qlpseudo.inf
> driver = d12, ql2xhai2.dll, QL2XHAI2
> driver = d12, qlsdm.dll, QLSDM
> driver = d12, cocpyinf.dll, COCPYINF
>
>
> [Config.ql2300]
>
>
> [Config.QL2XHAI2]
>
>
> [Config.OEMSCSI3]
> value =
> Parameters\Device,DriverParameters,REG_SZ,"UseSameNN=0;pseudo=0"
> value = Parameters\Device,MaximumSGList,REG_DWORD,0x21
> value = Parameters\Device,NumberOfRequests,REG_DWORD,0x96
> HKLM,SOFTWARE\SNIA\HBA\QL2X00,LibraryFile,0x00000000,"%dll%\ql2xhai2.dll"
> value = Parameters\PnPInterface,5,REG_DWORD,1
>
>
> [HardwareIds.scsi.OEMSCSI3]
> id = "PCI\VEN_1077&DEV_2300&SUBSYS_00091077", "ql2300"
> id2 = "PCI\VEN_1077&DEV_2312&SUBSYS_01001077", "ql2300"
> id3 = "PCI\VEN_1077&DEV_2312&SUBSYS_01011077", "ql2300"
> id4 = "PCI\VEN_1077&DEV_2312&SUBSYS_01021077", "ql2300"
> id5 = "PCI\VEN_1077&DEV_2300&SUBSYS_01061077", "ql2300"
> id6 = "PCI\VEN_1077&DEV_2322&SUBSYS_01151077", "ql2300"
> id7 = "PCI\VEN_1077&DEV_2322&SUBSYS_01161077", "ql2300"
> id8 = "PCI\VEN_1077&DEV_2322&SUBSYS_01171077", "ql2300"
> id9 = "PCI\VEN_1077&DEV_2322&SUBSYS_01181077", "ql2300"
> id10 = "PCI\VEN_1077&DEV_6312&SUBSYS_01191077", "ql2300"
> id11 = "PCI\VEN_1077&DEV_6312&SUBSYS_011C1077", "ql2300"
> id12 = "PCI\VEN_1077&DEV_2312&SUBSYS_010A1077", "ql2300"
> id13 = "PCI\VEN_1077&DEV_2312&SUBSYS_01000E11", "ql2300"
> id14 = "PCI\VEN_1077&DEV_2312&SUBSYS_027D1014", "ql2300"
> id15 = "PCI\VEN_1077&DEV_2312&SUBSYS_01010E11", "ql2300"
> id16 = "PCI\VEN_1077&DEV_2312&SUBSYS_01020E11", "ql2300"
> id17 = "PCI\VEN_1077&DEV_2312&SUBSYS_34BA8086", "ql2300"
> id18 = "PCI\VEN_1077&DEV_2312&SUBSYS_01021749", "ql2300"
> id19 = "PCI\VEN_1077&DEV_2312&SUBSYS_10511734", "ql2300"
> id20 = "PCI\VEN_1077&DEV_2322&SUBSYS_01701028", "ql2300"
> id21 = "PCI\VEN_1077&DEV_2312&SUBSYS_01030E11", "ql2300"
> id22 = "PCI\VEN_1077&DEV_2312&SUBSYS_01040E11", "ql2300"
> id23 = "PCI\VEN_1077&DEV_2312&SUBSYS_01050E11", "ql2300"
> id24 = "PCI\VEN_1077&DEV_2322&SUBSYS_34BC8086", "ql2300"
> id25 = "PCI\VEN_1077&DEV_2312&SUBSYS_018A1028", "ql2300"
> id26 = "PCI\VEN_1077&DEV_2312&SUBSYS_12BA103C", "ql2300"
> id27 = "PCI\VEN_1077&DEV_2312&SUBSYS_12C2103C", "ql2300"
> id28 = "PCI\VEN_1077&DEV_2312&SUBSYS_12C7103C", "ql2300"
> id29 = "PCI\VEN_1077&DEV_2312&SUBSYS_12C9103C", "ql2300"
> id30 = "PCI\VEN_1077&DEV_2312", "ql2300"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server
> 2003
> #//
> [Files.scsi.Si3112_XP]
> driver = d13, si3112.sys, Si3112
> driver = d13, SiWinAcc.sys, SiFilter
> inf = d13, SI3112.inf
> driver = d13, SilSupp.cpl, SILSUPP
> catalog = d13, Si3112.cat
>
>
> [Config.Si3112]
> value = ProblemDevices, "", REG_SZ, ""
> value = ProblemDevices, "Maxtor 4D060H3
> DAK05GK0", REG_SZ, "MaxMode = UDMA-5"
> value = ProblemDevices, "ST320012AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST330013AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST340017AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST360015AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST380023AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST3120023AS", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST340014ASL", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST360014ASL", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST380011ASL", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST3120022ASL", REG_SZ, "Mod15Write"
> value = ProblemDevices, "ST3160021ASL", REG_SZ, "Mod15Write"
>
>
> [Config.SiFilter]
>
>
> [Config.SILSUPP]
>
>
> [HardwareIds.scsi.Si3112_XP]
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_31121095", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_34238086", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_311215D9", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_01661028", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_82141033", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_82641033", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121095", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_01661028", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_82641033", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121014", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_02B71014", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1002&DEV_436E&SUBSYS_436E1002", "Si3112"
> id = "PCI\VEN_1002&DEV_436E&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1002&DEV_4379&SUBSYS_43791002", "Si3112"
> id = "PCI\VEN_1002&DEV_437A&SUBSYS_437A1002", "Si3112"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Silicon Image SiI 3x12 SATALink Controller for Windows NT 4.0 and
> 2000
> #//
> [Files.scsi.Si3112_NT]
> driver = d13, si3112.sys, Si3112
> inf = d13, SI3112.inf
> driver = d13, SilSupp.cpl, SILSUPP
>
>
> [HardwareIds.scsi.Si3112_NT]
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_31121095", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_34238086", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_311215D9", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_01661028", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_82141033", "Si3112"
> id = "PCI\VEN_1095&DEV_3112&SUBSYS_82641033", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121095", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_01661028", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_82641033", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_35121014", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_02B71014", "Si3112"
> id = "PCI\VEN_1095&DEV_3512&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1002&DEV_436E&SUBSYS_436E1002", "Si3112"
> id = "PCI\VEN_1002&DEV_436E&SUBSYS_B0021458", "Si3112"
> id = "PCI\VEN_1002&DEV_4379&SUBSYS_43791002", "Si3112"
> id = "PCI\VEN_1002&DEV_437A&SUBSYS_437A1002", "Si3112"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec SAS RAID Controller
> #//
> [Files.scsi.arcsas]
> driver = d14, arcsas.sys, arcsas
> catalog = d14, arcsas.cat
> inf = d14, arcsas.inf
>
>
> [Config.arcsas]
> value = "", Type, REG_DWORD, 1
> value = "", Start, REG_DWORD, 0
> value = "", Group, REG_SZ, "SCSI miniport"
> value = "", ErrorControl, REG_DWORD, 1
> value = Parameters\Device, NumberOfRequests, REG_DWORD, 0fe
>
>
> [HardwareIds.scsi.arcsas]
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02989005", "arcsas"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02999005", "arcsas"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_029A9005", "arcsas"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02f21014", "arcsas"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Adaptec RAID Controller
> #//
> [Files.scsi.aac]
> driver = d15, aac.sys, aac
> catalog = d15, aac.cat
> inf = d15, aac.inf
> inf = d15, aacmgt.inf
> driver = d15, aaccin.dll, none
>
>
> [Config.aac]
> value = "", Type, REG_DWORD, 1
> value = "", Start, REG_DWORD, 0
> value = "", Group, REG_SZ, "SCSI miniport"
> value = "", ErrorControl, REG_DWORD, 1
> value = Parameters\Device, NumberOfRequests, REG_DWORD, 0fe
> value = Parameters\Device, UncachedExtAlignment, REG_DWORD, e
>
>
> [Config.none]
>
>
> [HardwareIds.scsi.aac]
> id = "PCI\VEN_1011&DEV_0046&SUBSYS_03649005", "aac"
> id = "PCI\VEN_1011&DEV_0046&SUBSYS_03659005", "aac"
> id = "PCI\VEN_9005&DEV_0280&SUBSYS_02809005", "aac"
> id = "PCI\VEN_9005&DEV_0281&SUBSYS_02819005", "aac"
> id = "PCI\VEN_9005&DEV_0282&SUBSYS_02829005", "aac"
> id = "PCI\VEN_9005&DEV_0283&SUBSYS_02839005", "aac"
> id = "PCI\VEN_9005&DEV_0284&SUBSYS_02849005", "aac"
> id = "PCI\VEN_9006&DEV_2140&SUBSYS_21409006", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02859005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02869005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02879005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_028A9005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_028E9005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_028B9005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_028F9005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02909005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02929005", "aac"
> id = "PCI\VEN_9005&DEV_0285&SUBSYS_02939005", "aac"
> id = "PCI\VEN_9005&DEV_0286&SUBSYS_028C9005", "aac"
> id = "PCI\VEN_9005&DEV_0286&SUBSYS_028D9005", "aac"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// IBM ServeRAID 4Mx/4Lx/5i/6M/6i/7k Controller (Windows Server
> 2003)
> #//
> [Files.scsi.NFRDDotNet32]
> driver = d16, nfrd960.sys, NFRD960
> driver = d16, nfrdci04.dll, NFRDCI04
> catalog = d16, ibmnfrd3.cat
> inf = d16, nfrd960.inf
>
>
> [Config.NFRD960]
> value = parameters\PnpInterface,5,REG_DWORD,1
> value = parameters\Device,NumberOfRequests,REG_DWORD,128
>
>
> [Config.NFRDCI04]
>
>
> [HardwareIds.scsi.NFRDDotNet32]
> id = "PCI\VEN_1014&DEV_01BD", "nfrd960"
> id = "PCI\VEN_9005&DEV_0250", "nfrd960"
>
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// IBM eServer xSeries 440/445 (Windows Server 2003 HAL)
> #//
> [Files.computer.ibmhal_mp]
> hal = d1, halx44n.dll
> catalog = d1, halx44n.cat
> inf = d1, halx44n.inf
>
>
> #//////////////////////////////////////////////////////////////////////////////
> #//
> #// Smart Array 5x and 6x Driver Windows Server 2003
> #//
> [Files.scsi.B178]
> driver = d1,cpqcissm.sys,cpqcissm
> inf = d1,cpqcissm.inf
> catalog = d1,cpqcissm.cat
>
> [Config.cpqcissm]
> value = "",tag,REG_DWORD,103
> value = Parameters\PnpInterface,5,REG_DWORD,1
> value = Parameters\Device,NumberOfRequests,REG_DWORD,80
>
> [HardwareIds.scsi.B178]
> id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11","cpqcissm"
> id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11","cpqcissm"
> id = "PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11","cpqcissm"
> id = "PCI\VEN_0E11&DEV_B178","cpqcissm"
>
>
> regards
>
> Johan Arwidmark
> Microsoft MVP - Setup/Deployment
>
>
>
> On Thu, 8 Dec 2005 14:34:27 -0600, "Jeff" <jeffpoling@xxxxxxxxx>
> wrote:
>
>>I've seen several posts similar to this but no concrete answers. I am
>>attempting to do a network-based unattended install of W2K3. The server
>>uses Qlogic 2300 series HBAs to connect to our SAN and the server will
>>boot
>>from the SAN. I've configured the unattend.txt file and the txtsetup.oem
>>file so that the Qlogic drivers are copied during setup. When setup reads
>>the txtsetup.oem file, it returns an error stating that there is a syntax
>>error on line 1. What do I need to do to get setup to recognize my qlogic
>>drivers during setup?
>>
>>Jeff
>>
>


.

Relevant Pages