RE: VPN Connection Error 628 and 721 over Linksys
- From: srandolph <srandolph@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 31 Oct 2005 06:42:02 -0800
Hello Wendel,
Thanks for your response.
I have not had this problem before and I failed to check the connection
from with-in the network. I will do that today.
Again thanks for your response.
~e
"edisonrus" wrote:
> Help With VPN.
>
> Here is the basic setup.
>
> The office setup:
>
> Two client computers running Win XP SP2
> One Server running Windows 2003 SP 1(Single NIC)
> Internet connection is through a Linksys WRT564G SRX Router
> VoIP with Vonage through a Linksys RT31P2 Router
>
> The VPN server sits behind the WRT54G and the basic configuration is as
> follows:
>
> On the properties page of the VPN server:
>
> General tab:
> Enable this computer as a:
> Router
> Lan and Demand-dial routing
> Remote access server
> All are enabled
>
> Security Tab:
> Windows Authentication
>
> IP Tab
> Enable IP Routing
> Allow IP based remote access and demand dial connections
> Using Static address pool.
> 192.168.1.10 to 192.168.1.20
>
> PPP Tab
> All defaults
>
> Logging Tab
> Log all events enabled
>
> PORT ICON
> WAN Miniport (L2TP) 0
> WAAN Miniport (PPTP) 5
> Rest Defaults
>
> REMOTE ACCESS POLICY
> Day-And-Time Restriction set to default
> Tunnel-Type matches Generic Route Encapsulation
> Point-to-Point Tunneling Protocol
> Windows-Groups matches “VPN Server\VPN Group”
>
>
> EDIT PROFILE
> Authentication TAB
> MS-CHAP v2
> User can change PW
> MS-CHAP
> User can change PW
>
> IP TAB
> Server settings determine IP address assignments
> All other Tabs are default
>
> REMOTE ACCESS LOGGING
> Authentication request is enabled
>
> VPN Server IP Addressing:
> IP 192.168.1.5
> SM 255.255.255.0
> DG 192.168.1.1
> Static DNS Addresses
>
> WRT54G IP Configuration (updated firmware)
> IP 192.168.1.1
> DG ISP
> PPTP Pass-through is enabled
> PPTP 1723 Port is forwarded to VPN Server at 1923168.1.5
> DHCP is enabled
> MTU 1400
>
> RT31P2 (updated firmware)
> IP 192.168.15.1
> DG 192.168.1.1
> Nothing sits behind this. Just the VoIP service
>
> The DSL Line is setup with Vonage.
>
> Remote Clients
> Windows XP Sp2
> Both access through DSL
> One with a Linksys WRT54G Router and the other through a BEFSR41
> PPTP enable and 1723 forwarded.
>
> Client Connection Configuration
>
> General TAB
> VPN Server IP Address
> Dial another Connection first is Disabled
>
> OPTIONS TAB
> Defaults
>
> SECURITY TAB
> Advance (custom setting)
> Data encryption
> Require encryption (disconnect if server declines)
> Allow these Protocols are:
> MS-CHAP
> MS-CHAPv2
>
> NETWORKING TAB
> Unchecked Use default gateway on remote network
>
> ADVANCE TAB
> Tried firewall both Enabled and Disabled
>
> When connecting to VPN Server I get two errors. One client it is Error 721
> and on the other Client it is 628
>
> Both the ISP and Vonage say that I can VPN through their connection.
> On the VPN server, I get an Event ID Warning Type error 20209-Source Rasman
> It is telling me that a connection has been established but the VPN
> connection cannot be completed. It suggests that the most probable cause is
> that somewhere along the line, GRE is not being permitted.
>
> Please, any help will be most Appreciated
> ~e
>
>
>
>
.
- References:
- VPN Connection Error 628 and 721 over Linksys
- From: edisonrus
- VPN Connection Error 628 and 721 over Linksys
- Prev by Date: Re: Error 2195, Acess is denied
- Next by Date: Windows Server 2003 and NTP Serving...
- Previous by thread: RE: VPN Connection Error 628 and 721 over Linksys
- Next by thread: Re: Need help to setup Terminal Server
- Index(es):
Relevant Pages
|
