Diskpart.exe / expand

Hello,
My problem is as follows:
I had a server that's come close to running out of diskspace. Two drives
mirrored for a total of 34GB.
Windows was installed on only 4GB. The rest of the space was unallocated.
The file system is NTFS.
In an attempt to utilize the rest of the disk space I ran:
diskpart.exe
list volume
expand
Now I get the message

Subsequently under Computer Management / Disk Management indicated
down in the bottom right graph type section Disk 0 Basic 34GB (Healthy)

However up above under volume / IBM_PRELOAD (C:) the file system NTFS Status
= Healthy / Capacity = 4GB / Free Space = 100MB

If I do a right click/properties on the C drive it indicates capacity 4GB /
available 100mb

In an attempt to correct the problem I rebooted. Same problem.
In an attempt to correct the problem I configured Disk 0 as a dynamic disk.
Rebooted. Same problem. Although now I have a dynamic disk volume.
In an attempt to correct the problem I attempted to use diskpart / expand
again.
This time I get an error message; failed to expand the volume...

Any idea on how I can resolve this problem.
Thanks in advance.

--
RAJ
.

Relevant Pages

  • Re: 3B2 Disks
    ... being able to read the disk in its present format. ... 2 MFM drives on a custom controller. ... SCSI came much later as an add on card. ...
    (comp.sys.3b1)
  • Re: OT-True Image Backup
    ... Make sure the USB drives file system is NTFS and not FAT32.. ... Jaymon is correct in that the disk image you create and save to the D: ... partition of your USB external HDD will have no effect on the other ... Step-by-Step Instructions for Using the Acronis True Image Program to Backup ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: OT-True Image Backup
    ... Make sure the USB drives file system is NTFS and not FAT32.. ... Jaymon is correct in that the disk image you create and save to the D: ... partition of your USB external HDD will have no effect on the other ... Since the disk images you will be creating (at least the initial backup ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Replacing Notebook Hard Drive
    ... both the disk cloning & disk imaging capabilities of the ATI program. ... Step-by-Step Instructions for Using the Acronis True Image Program to Backup ... can take to back up the entire contents of one's day-to-day working HDD, ... With both hard drives connected, ...
    (microsoft.public.windowsxp.hardware)
  • Re: Sticky Computer Problem:
    ... I can't recommend any of the preassembled external drives. ... can take to back up the entire contents of one's day-to-day working HDD, ... Creating disk images ... can be either a USB or Firewire or SATA external HDD. ...
    (microsoft.public.windowsxp.general)
Loading