Event error 20108 Remote Access

Windows 2000 Server SP4

I installed and configured a VPN server by using article ID 308208. When I
(re)start Routing and Remote Access I get an eventid 20108 for the source:
remoteaccess. The description is:

Unable to open the port VPN3-1 for use. Not implemented.

When I start Routing and remote access and look at Ports I cannot see the
two PPTP ports I configured, but I can see the L2TP VPN ports. When I look
for the PPTP properties I see the maximum ports on zero. When I set it on two
and click ok I see wan miniport (PPTP) on two. Click ok again and then the
properties again then wan miniport (PPTP) is on zero again. What's wrong?

Thanks already,

Wilbert

.

Relevant Pages

  • Eventid 20108 with Remote Access
    ... When I start Routing and remote access and look at Ports I cannot see the ... two PPTP ports I configured, but I can see the L2TP VPN ports. ...
    (microsoft.public.win2000.general)
  • Re: VPN Problem with W2k03 and ISA04
    ... and remote access" and add more WAN Miniport ports under the ... > connect using PPTP VPN, I get the following error message in the Monitoring ...
    (microsoft.public.isa.vpn)
  • Re: Multiport Modem cards (Perle)...
    ... the Ports section of the Routing and Remote Access? ... not clear is whether you are seeing all the devices under Device Manager or ... > Windows Server 2003 running Routing and Remote access. ...
    (microsoft.public.win2000.ras_routing)
  • Re: PC Anywhere
    ... I went into Administrative Tools> Routing and Remote Access and, ... Routing & Remote Access ... > services and ports TAB ... > one for port 5631 point it to the IP address of the work station you want ...
    (microsoft.public.windows.server.sbs)
  • Forward to an Internal - SBS2003 STD
    ... I need to forward some ports to an internal machine - how?? ... I've looked at Routing and Remote Access> Basic NAT but there is NO WAN ...
    (microsoft.public.windows.server.sbs)
Loading