Re: Winnt.exe Unattended Setup for 64-bit Server 2003.

With regards to you latest post, can you give me details on what Linux PXE
system you are using? I am using a Windows Server 2003 system with RIS
installed but not configured. This allows me to use PXELinux with TFTPD in
windows to serve my floppy boot images. However, I have not been able to
figure out a way to PXE boot with ISO images using this system. I only
installed WinPE to the hard drive because I couldn’t figure out how to PXE
boot to an ISO.

Any details you can share are very much appreciated.

"Jack" wrote:

> I'm not sure if I'm going to be any help.
>
> We are using a Linux PXE system, from which we are booting WinPE
> directly from PXE. When our WinPE boots up, it starts networking, maps
> a drive, lets us make some choices for the OS, then starts a network
> based install by calling winnt32.exe.
>
> We experimented a little with PE on the HD. But went to network based
> instead.
>
> Maybe someone else can help.
>
> Jack
>
>
> On Tue, 5 Apr 2005 06:55:04 -0700, "SoWright"
> <SoWright@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> >The WinPE install is approximately 213MB, and with the OS source files I'm
> >using about 829MB of disk space. I put all this on a DVD and booted from the
> >DVD and the install runs with no problems. But if I install WinPE and the OS
> >source files to the hard drive and boot from the hard drive, networking will
> >not start and I get the "Out of Memory" error when I run winnt32.exe.
> >
> >I have 1GB of memory installed.
> >
> >Thanks for the input.
> >
> >"Jack" wrote:
> >
> >> How much RAM is in the BOX?
> >>
> >> How big is your WinPE install in MBs?
> >>
> >> Jack
> >>
> >>
> >> On Mon, 4 Apr 2005 13:17:02 -0700, "SoWright"
> >> <SoWright@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> >>
> >> >Ok....since I was unable to find ADS 1.1, I tried the following.
> >> >
> >> >I built a 64bit version of WinPE and installed it to the hard drive of my
> >> >destination computer using a DOS PXE boot environment. I also copied the
> >> >64bit Extended OS source files to the hard drive. I was able to boot WinPE,
> >> >but when I tried running Winnt32.exe, I got a pop up error "Out of Memory"
> >> >and setup exited.
> >> >
> >> >Any thoughts?
> >> >
> >> >"Jack" wrote:
> >> >
> >> >> On Wed, 30 Mar 2005 12:01:06 -0800, "SoWright"
> >> >> <SoWright@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> >> >>
> >> >> >Thanks....are you currently using RIS?
> >> >> >
> >> >>
> >> >>
> >> >> No, We use ADS. We mainly deploy Windows Servers.
> >> >>
> >> >> Jack
> >> >>
> >> >>
> >>
> >>
>
>
.

Relevant Pages

  • Re: Linux distros
    ... The install CD/DVD allow you to recover from boot failures and such. ... There are sites which host extra packages for Slackware, just search "slackware packages", linuxpackages.net is pretty good. ... I just don't know what files to download and where to put them to use PXE. ... In the case of PXE boot to install Slackware on a target machine you just need to have the server set up properly to kick-start the installation process. ...
    (comp.os.linux)
  • Re: installing Ubuntu via PXE using tftpd32
    ... If possible, boot from CD-ROM or DVD, and install from there! ... turned off the windows firewall and the routers own DHCP server. ... Are you wanting to do a PXE install over a wireless LAN? ...
    (comp.os.linux.setup)
  • Re: Winnt.exe Unattended Setup for 64-bit Server 2003.
    ... >With regards to you latest post, can you give me details on what Linux PXE ... >figure out a way to PXE boot with ISO images using this system. ... >> We are using a Linux PXE system, from which we are booting WinPE ... >>>The WinPE install is approximately 213MB, and with the OS source files I'm ...
    (microsoft.public.windows.server.setup)
  • RE: SCCM - Boot Task Sequence Wizard from Hard Disk
    ... partition on the local hard disk and then boot from that HDD partition ... We also have another Win7 install method that works ... I have also tried doing some tweaking to the WinPE Wim, ... So if you used a custom WinPE images. ...
    (microsoft.public.sms.admin)
  • Re: Winnt.exe Unattended Setup for 64-bit Server 2003.
    ... We are using a Linux PXE system, from which we are booting WinPE ... When our WinPE boots up, it starts networking, maps ... >The WinPE install is approximately 213MB, and with the OS source files I'm ...
    (microsoft.public.windows.server.setup)