Re: Can not Remote access to Server

From: Kristofer Gafvert (kgafvert_at_NEWSilopia.com)
Date: 06/01/04 

Date: Tue, 1 Jun 2004 20:40:42 +0200

And you are sure that it is enabled? (see my first post)
If it is enabled, please try this:

Click Start->Run, type "cmd" (without the quotes) and press ENTER
Type:

telnet <IP HERE> 3389

replace <IP HERE> with the IP of the server.

Do you get a "blank" cmd window? 

-- 
Regards,
Kristofer Gafvert - IIS MVP
http://www.ilopia.com - When you need help!
"jimmy" <anonymous@discussions.microsoft.com> wrote in message
news:1691e01c44807$3cfed0c0$a301280a@phx.gbl...
> The client could not connect to the remote computer.
>
> Remote connections might not be enabled or the computer
> might be too busy to accept new connections.
> This is the error message!
>
> Jimmy
> >-----Original Message-----
> >You are not giving us much information. First of all, are
> you trying to use
> >Remote Desktop, or PcAnywhere? And what happens when you
> try to connect?!?
> >
> >If you are using PcAnywhere, have you configured it
> properly?
> >
> >-- 
> >Regards,
> >Kristofer Gafvert - IIS MVP
> >http://www.ilopia.com - When you need help!
> >
> >
> >"Jimmy" <anonymous@discussions.microsoft.com> wrote in
> message
> >news:1699b01c44802$56dcc560$a501280a@phx.gbl...
> >> I have WIndows 2003 Server with 2 LAN cards which one
> for
> >> WAN and another one for LAN.
> >> I have Static IP for WAN, and LAN has IP 192.168.0.X
> >> I have never able to run Remote Desktop Connection to
> >> Server, so, I install PCANYWHERE on server.
> >> I do not have any firewall install on Server yet!
> >>
> >> Jimmy
> >> >-----Original Message-----
> >> >PcAnywhere? Remote Desktop Client? They work together?
> >> >
> >> >Maybe you would like to tell us what actually happens
> >> when you try to
> >> >connect? Maybe an error message?
> >> >
> >> >-- 
> >> >Regards,
> >> >Kristofer Gafvert - IIS MVP
> >> >http://www.ilopia.com - When you need help!
> >> >
> >> >
> >> >"Jimmy" <anonymous@discussions.microsoft.com> wrote in
> >> message
> >> >news:16ad601c44800$699e7a10$a001280a@phx.gbl...
> >> >> I have checkedcd that function, but I still can not
> >> >> access.Evev with pcanywhere!
> >> >>
> >> >> jimmy
> >> >> >-----Original Message-----
> >> >> >Hello,
> >> >> >
> >> >> >This maybe?
> >> >> >
> >> >>
> >>
> >http://www2.ilopia.com/Windows+Server+2003/FAQ/TS/98.aspx
> >> >> >
> >> >> >      I installed the Remote Desktop Connection
> client
> >> on
> >> >> another computer,
> >> >> >but when I try to logon to the server I get: "The
> >> client
> >> >> could not connect
> >> >> >to the remote computer. Remote connections might
> not be
> >> >> enabled..." What is
> >> >> >wrong?
> >> >> >
> >> >> >      The complete error message is: "The client
> could
> >> >> not connect to the
> >> >> >remote computer. Remote connections might not be
> >> enabled
> >> >> or the computer
> >> >> >might be too busy to accept new connections. It is
> also
> >> >> possible that
> >> >> >network problems are preventing your connection"
> >> >> >
> >> >> >      The most common reason why this occur is
> because
> >> >> you have forgotten to
> >> >> >allow users to logon remotly. To allow this, follow
> >> these
> >> >> steps:
> >> >> >
> >> >> >        a.. Right click My Computer and select
> >> Properties
> >> >> >        b.. Click the Remote tab and in the Remote
> >> >> Desktop area check the
> >> >> >box Allow users to connect remotly to this computer
> >> >> >
> >> >> >
> >> >> >
> >> >> >-- 
> >> >> >Regards,
> >> >> >Kristofer Gafvert - IIS MVP
> >> >> >http://www.ilopia.com - When you need help!
> >> >> >
> >> >> >
> >> >> >"Jimmy" <anonymous@discussions.microsoft.com> wrote
> in
> >> >> message
> >> >> >news:1678d01c447f8$6f7dbf70$a401280a@phx.gbl...
> >> >> >> Windows 2003 server can not remote access to
> server
> >> from
> >> >> >> Remote desktop connection.
> >> >> >> Help!
> >> >> >>
> >> >> >>
> >> >> >> Jimmy
> >> >> >
> >> >> >
> >> >> >.
> >> >> >
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

Relevant Pages

  • Re: Client behind a firewall!
    ... Microsoft MVP - Terminal Server ... Internet with Remote Desktop enabled when I'm at work, ... Remote Desktop client is blocked, and I just can't use it. ...
    (microsoft.public.windows.terminal_services)
  • RE: VBScript: Remote Desktop Disconnected
    ... VBScript: Remote Desktop Disconnected ... The client could not connect to the remote computer. ... I suggest we try to rerun the CEICW to confirm the RWW is properly ... On the SBS 2003 Server open the Server Management console. ...
    (microsoft.public.windows.server.sbs)
  • Re: Client behind a firewall!
    ... Internet with Remote Desktop enabled when I'm at work, ... ISA Server proxy, which will only let HTTP traffic through; ... Remote Desktop client is blocked, and I just can't use it. ...
    (microsoft.public.windows.terminal_services)
  • Re: RWW works with IP but not FQDN
    ... if I go to http://servername/remote at the server and log ... In another response GG states" "Did you declare FQDN on rule of RWW? ... I'm trying to connect from a client not running windows firewall that is ... but neither Remote Server Access or Remote Desktop ...
    (microsoft.public.windows.server.sbs)
  • Re: Can not Remote access to Server
    ... I want to use remote desktop connection! ... >Remote Desktop, or PcAnywhere? ... >> Server, so, I install PCANYWHERE on server. ...
    (microsoft.public.windows.server.setup)
Loading