Re: My Server is not anymore seen on network plese help ?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

here is the client ipconfig.
I have set this setting manually becasue as DHCP is not detected my machine
would recieve private Ip adress with mask of 255.255.0.0

So I have set it in the way that it should be able to ping my sbs server
wich as adress 192.168.1.102 which it is not reachable for some reason

Windows IP Configuration

Host Name . . . . . . . . . . . . : VOSTRO1710
Primary Dns Suffix . . . . . . . : solatys.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : solatys.local

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card
Physical Address. . . . . . . . . : 00-22-5F-7C-8E-D9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) Family
PCI-E
GBE NIC
Physical Address. . . . . . . . . : 00-21-70-F8-F1-C1
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::e420:de55:7835:4c3%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.102
DHCPv6 IAID . . . . . . . . . . . : 167780720
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-11-B1-BC-02-00-22-5F-7C-8E-D9

DNS Servers . . . . . . . . . . . : 213.36.80.1
Primary WINS Server . . . . . . . : 192.168.1.102
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{1B69E378-E466-4D6B-93DE-65B0E08B8
367}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . :
isatap.{6CEBE6E5-3512-49C1-B75B-A515681AA
660}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . :
2001:0:5ef5:73bc:3c2c:f6e:3f57:fe98(Prefe
rred)
Link-local IPv6 Address . . . . . : fe80::3c2c:f6e:3f57:fe98%12(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

Thanks for help
serge

"Merv Porter" wrote:

Please post an ipconfig /all for the client PC.


--
Merv Porter [SBS-MVP]
============================
"calderara" <calderara@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B34F930C-C9CD-4BDE-BEE7-9BB2574E04E0@xxxxxxxxxxxxxxxx
My client PC is still not capable of finding DHCP server; I have try
ipconfig
/renew with no help

"calderara" wrote:

Here is the config /all;
Host name . . . . . . . . . . : SOLATYS
Suffixe DNS principal . . . . . . : solatys.local
Type of node . . . . . . . . . . : unknown
Routing IP activated . . . . . . . . : yes
Proxy WINS activated . . . . . . . . : Yes
Liste de recherche du suffixe DNS.: solatys.local

Ethernet Connexion au réseau local du serveur :

Suffixe DNS propre à la connexion :
Description . . . . . . . . . . . : Broadcom NetXt

Adresse physique . . . . . . . . . : 00-1E-C9-5C-D3
DHCP activated. . . . . . . . . . . . : No
Adresse IP. . . . . . . . . . . . : 192.168.1.102
Masque de sous-réseau . . . . . . : 255.255.255.0
Passerelle par défaut . . . . . . : 192.168.1.1
Serveurs DNS . . . . . . . . . . : 192.168.1.102
Serveur WINS principal. . . . . . : 192.168.1.102

It is in french but I have translate main points. As you can see the DHCP
is
still not activated and can not find out from where I should activated: I
have run many times the wizard...

Type of node is also set to Unknown
IP 192.168.1.1 is my adsl router adress

BPA did not say anything

thnaks for help
serge



"Merv Porter" wrote:

Please post the results of an ipconfig /all for the sbs server.

Also, run a scan with the SBS 2003 BPA to see if it can find any
problems:

Microsoft Windows Small Business Server 2003 Best Practices Analyzer
http://www.microsoft.com/downloads/details.aspx?familyid=3874527A-DE19-49BB-800F-352F3B6F2922&displaylang=en

--
Merv Porter [SBS-MVP]
============================

"calderara" <calderara@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:69FD5D1C-61E1-467E-9AFC-6FA3256F539B@xxxxxxxxxxxxxxxx
hello

after running the wizard client seems to get the dhcp setting from
server
but I am not really sure because I a not able to ping the ip adress
of my
server from client computer even by name.

but from my server I cqn ping my client either by name or ip adress.
So I guess somthing still wrong as it work only from server to client
but
reverse fails

any idea is welcome I am lost...

regards


"Merv Porter" wrote:

SBS will shut down its own DHCP service if it sees another DHCP on
the
network. Re-run CEICW to allow the SBS 2003 server to act as the
DHCP
server for the network.

--
Merv Porter [SBS-MVP]
============================

"calderara" <calderara@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:25A82F25-10F7-47F4-AD45-34017805A162@xxxxxxxxxxxxxxxx
Dear all,

I have an SBS 2003 server which was working ok since a long time
and
sudenly
after a reboot , my client computer cannot detect my server DHCP.
I have noticed that mu FAI router as been updated and that DHCP
has
been
set
to default value, so I wen to my router setting and desable DHCP
mode.

Since that time without changing any setting on my server itself,
my
server
is not anymore visible from network and client are not able to
receive
IP
adress from my SBS 2003 DHCP address.

I have made following test :
On one of my client computer I have set manuall the IP adress that
my
server
is suppose to deliver, then I try to ping my server adress from my
client
machine but no luck ping fails.

What can I check else, I am out of idea ?
Does the fact of having 2 DHCP at a certain time has made some
messy
things ?

Thnaks for hep
serge

.

.

.

.

Relevant Pages

  • Re: Application Hang
    ... Back to DHCP, what about the client ipconfig without the DG ip address? ... When the old server crashed, it required a new motherboard and CPU. ... You should see at least,006 DNS servers, 003 Router. ...
    (microsoft.public.windows.server.networking)
  • Re: Windows Server 2003 DHCP server - Does not release IP Addresses
    ... on the SWITCH or the ROUTER. ... the clients will not know which server to go for DHCP REQUEST. ... And, if that Switch had some issues, how will the other DHCP server ... This error is usually received when the client booting up via PXE is ...
    (microsoft.public.windows.server.general)
  • Re: DHCP handles Naks one one vlan differently
    ... If the problem is on the network with the DHCP server, ... Frame 156 ... Your (client) IP address: 0.0.0.0 ...
    (comp.dcom.sys.cisco)
  • Re: Sending hostname with DHCP
    ... default route and the default dns host. ... Below is my /etc/resolv.conf created by the dhcp client. ... > This seems to depend on the client as much as the server. ...
    (Fedora)
  • Re: DHCP toruble on my server occurs suddenly, help ?
    ... let say that my DHCP lease time is set to 8 days. ... Does the DHCP server will attribute to my laptop same previous adress ...
    (microsoft.public.windows.server.sbs)