Re: HP ML350 G5 SERVER + WINDOWS SBS 2003 R2 SP2


Hi Ace,


This is the ipconfig from another workstation in the network.

If you see the first attached file, it was the server and another
workstation DHCP config, and OFICINA did not appeared. Now I have send
another workstation DHCP config so it is possible to be a bad DHCP config
that I had done in the past in this workstation.

I will see it tomorrow.


"Ace Fekay [Microsoft Certified Trainer]" <aceman@xxxxxxxxxxxxxxxxxxxxxxx>
escribió en el mensaje news:ucBmW7L$JHA.5068@xxxxxxxxxxxxxxxxxxxxxxx
"Juan Carlos" <sieworksQUITAESTO@xxxxxxxxxxx> wrote in message
news:ef1SU2K$JHA.4168@xxxxxxxxxxxxxxxxxxxxxxx
Thank you Marina.

Can you help me, how can remove "oficina" from dns and configure
workstations to obtain the IP form the DHCP server. These operations have
to
be done in the server or workstations. Sorry, but I still with this
problem
from February, lots of technicians (MS and HP) and much configurations
were
changed. Please, if it is not an inconvenience, give me some steps.

The installed programs on the server are not Visual Fox Pro, XBase and
Visual Basic, these were the programming tools used for third party
companies to deploy all the applications. These are simple client-server
application with database connection (not SQL Server). The applications
open
databases and work with theirs tables in a shared folders on the server.
Each one has its own folder.

I can not change the page file. If I put minimum 6 Gb and maximum 12 Gb,
appear a message indicating it must be low to 4096. I can only select
admin.
by the system or let with same values. I have choosen it and it must
restart
the server. I shall try to change it again after reboot. (min: 6144 max:
12288) is it correct?.

Regards,


Hello Juan,

For DHCP, please open the DHCP console and make the following changes:

1. Go into DHCP console.
2. Choose your scope.
3. Then choose Scope Options.
4. Remove Option 004. It is not needed. Machines in a domain will
automatically get their time from the PDC Emulator, which is the SBS server.
5. Add Option 044. Provide IP 192.168.0.2.
6. Add Option 046. Type in (without the quotes) "0x8"
7. Add Option 015. Type in (without the quotes) 'oficina.local'
8. Have your clients restart their machines.


To change workstations to use DHCP, go to the workstation. Open Network
Connections window. Go into properties of the network card. Select
'Automatically get IP from DHCP server' for the IP configuration and for the
DNS configuration. Then restart the workstation.

As for the connection suffix 'oficina,' please see my other response. We
need to know what the name is in Active Directory Users and Computers, as
well as the zone name in DNS. If not sure, you can take pictures of it and
attach the pictures.

Thank you,

Ace







.

Relevant Pages

  • Re: DHCP not working right after server restore from backup
    ... The whole problem seemed to be linked to old information in both DHCP and ... But from your message (the part about the DNS) I got the bright idea ... Make sure you do not test from just one workstation. ... from the server then I know thew network is goofed up. ...
    (microsoft.public.windows.server.sbs)
  • Re: Configuring SBS 2000 for NAT.
    ... If the router has any DHCP ability, ... and even the server to get he connections back. ... configure it to log in each workstation statically. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Help!! Web Server outage - ping failure
    ... Ping from workstation: .2 fails, ... secondary IP from the server and get responses. ... the difference in settings between dhcp and setting ip manually. ...
    (microsoft.public.inetserver.iis)
  • Re: event id 1053/1054. no ping after installing windows 2003 SBS
    ... this bit claims the workstation is not using DHCP ... run the local IP as 192.168.0.1 and provide a miniDHCP server, ... After installing sp1 for windows 2003 SBS the clients cannot contact the ...
    (microsoft.public.windows.server.sbs)
  • Re: Re-Post - "the trust relationship between this workstation and
    ... There were no logged events in either the DC or workstation. ... DC/DNS Server - DCDiag ... Attr: subschemaSubentry ... only problem is adding a new user account on the station. ...
    (microsoft.public.windows.server.active_directory)