2008 SBS no longer boots
- From: Freaky <wontsay@xxxxxxxxxx>
- Date: Mon, 06 Apr 2009 18:58:34 +0200
Hi there,
this is the third time we're experiencing this issue, and are about done
with it. The previous 2 times the servers were reinstalled. This is the
2nd time on this box. The other time was on another box, same type
though, HP ProLiant ML350G5.
The server continuously reboots during the boot process. If we try to
boot into safemode it reboots too, right after crcdisk.sys. If we
disable automatic reboot we get a BSOD stating A problem has been
detected and Windows has been shut down to prevent damage to your
computer. Bla bla bla.
STOP: 0x0000007b (0xfffffa60005af9d0, 0xffffffffc0000034,
0x0000000000000000, 0x0000000000000000)
According to HP this problem is unknown, we should contact Microsoft.
Called Microsoft for a support case. The engineer said he encountered
this more often, always with the same HP hardware. At first he tried to
have me use recovery console (well command prompt, there no longer is a
recovery console) with tools like listsvc, fdisk /mbr, etc. All these
tools no longer exist...
Then he had me look through the BIOS to change the SATA mode of the RAID
controller to AHCI. This is a SmartArray E200i hardware RAID controller
with SAS disks. I don't really think it has AHCI... nor was I able to
find it (not in it's BIOS nor in ACU on smartstart). Odd enough I can't
find it for the single SATA port on it either. Inside the HP case
there's a description of connectors, it's not called SATA port, it's
explicitly called 'SATA Optical Connector'. It has the CD drive attached
to it. Not able to find any options to completely disable the IDE and
SATA controllers either. I rather miss the CD, than have an entire
company down.
Next we tried ERD commander, which sees or 2008 SBS SP1 install, but
doesn't recognize it (perhaps because it dutch, it should work on 2008
SBS according to the MS engineer), and thus doesn't want to run it's
tools against it (like regedit, fixing the MBR (which should help
according to the helpdesk, which I seriously doubt), hotfix rollback etc.
He did mention it has to do with a driver update HP released to
MicrosoftUpdate. Apparently 2008 (and Vista) install all driver updates
also (which is way beyond me, who decided on that and where can I find
him/her? :D). HP support is currently closed, so haven't got their
feedback yet.
In all 3 cases the server was running for quite a while before the issue
occurred. After reinstall we also installed all updates and restarted
several times. Yet it comes back every time. We don't do anything
special, we even got the latest drivers from HP site for every
reinstall, no weird driver from driverguide.com or anything like that.
No weird software on it, etc.
Definitely don't want to reinstall again, if only because the issue
apparently can come back at any time. Really loosing all trust
whatsoever in both companies. Unfortunately, ditching MS will be hard,
HP on the other hand...
Hope anyone has some useful information. According to some post I found
you can disable services manually now (thus exporting the registry,
reading that piece of !#%$@!#$, and making your own reg hacks to
disable. Yes, I can see how this is a step forward, I take it windows 7
will require us to use a hexeditor on the registry file, which will
really make me wonder how they're gonna improve it after that :D).
TIA
.
- Follow-Ups:
- Re: 2008 SBS no longer boots
- From: Susan Bradley
- Re: 2008 SBS no longer boots
- From: Cliff Galiher
- Re: 2008 SBS no longer boots
- Prev by Date: ISA question
- Next by Date: Re: administrator locked out of SBS 2003
- Previous by thread: ISA question
- Next by thread: Re: 2008 SBS no longer boots
- Index(es):
Relevant Pages
|
Loading
