Re: Can't connect Windows XP Pro machine to domain

Recheck your network configuration according to the procedures in the
following KB article for a "single network adapter". You mentioned that you
turned off DHCP service on the router... that's good. When you have the
network configured properly, re-run CEICW to auto-configure DHCP on the SBS
server, select your services and complete the rest of CEICW. (NOTE: do
not let SBS use UPNP to auto-configure the router. You want to configure
the router manaully). Then make sure your workstations are set to get an IP
address automactically. Then reboot your workstations and see if there are
any problems accessing the server.

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

--
Merv Porter [SBS-MVP]
============================

"Kooper113" <Kooper113.3n3d3a@xxxxxxxxxxxxx> wrote in message
news:Kooper113.3n3d3a@xxxxxxxxxxxxxxxx

So I'm in the office right now and did a /release & renew on the
computers, but they can't find the DHCP server. I tried setting the DNS
to point to the server IP (192.168.1.6) but still nothing. Any ideas?


--
Kooper113
------------------------------------------------------------------------
Kooper113's Profile: http://forums.techarena.in/members/kooper113.htm
View this thread:
http://forums.techarena.in/small-business-server/1114966.htm

http://forums.techarena.in



.

Relevant Pages

  • Re: RWW Disconnecting
    ... Looking back now I do not know how I was able to get the DHCP service to run ... my clients use the router for DHCP and still have access to the SBS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: TCPSVCS.EXE Crashes Event ID 1000
    ... The DHCP service generates a random access violation in the Tcpsvcs.exe ... service on a Windows Server 2003-based computer ...
    (microsoft.public.windows.server.sbs)
  • RE: cannot run connect to the internet cannot set DHCP scope
    ... The wizard cannot set the DHCP scope options. ... DHCP service manually, and then configure your client computer IP address ... The issue occurs when DHCP Server service is started, ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant install Windows Small Business 2003 Client
    ... 1.Please disable DHCP of router,make sure DHCP service and DHCP client ... 2.As you said,you have ever renamed the server name, had better not change ... from your newsreader: microsoft.private.directaccess.partnerfeedback. ...
    (microsoft.public.windows.server.sbs)
  • Simple Network Question
    ... I am more or less new to FreeBSD and used to Linux. ... on FreeBSD at home using DHCP. ... Now I want to move the server into our ... I found in the docs to change the network configuration I have to assign ...
    (freebsd-questions)