sbs 2003 hangs in the middle of the night.

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



sbs 2003 server or servers appear to hang in the middle of the night at the
same time. backup exec 12 is running a few hours before and will fail of
course when the server becoems non responsive. nothing in the logs
indicating why except last recorded event is logical disk manager entered the
stopped state everytime. only a hard reboot will bring the server back and is
fine after that. i have reviewed that ipsec services going into block mode
after windows updates in July 2008 can be a cause and have seen this on
several sites but the console can be logged in in these cases. when the
above happens the server is hung. symantec av 10 corp is installed on the
server.

--
help
.



Relevant Pages

  • Re: CD drive causes SBS to hang
    ... There is no 3rd party software installed on the SBS. ... simply inserting a blank CD causes SBS to hang; ... The DVD burner is intended to backup critical data, ... server to crash before any software such as Acronis can be run. ...
    (microsoft.public.windows.server.sbs)
  • Extremely slow boot: fixed but curious
    ... SP1 Dell PowerEdge SC430 server that was taking about an hour to fully boot. ... I looked at DNS, which correctly had only the SBS LAN IP for its DNS server ... running, so I left its services disabled, and re-enabled Backup Exec ...
    (microsoft.public.windows.server.sbs)
  • RE: Backup Question
    ... normal server and SBS server. ... support to confirm if your Backup Exec can be installed and work in SBS ... This posting is provided "AS IS" with no warranties, ...
    (microsoft.public.windows.server.sbs)
  • PROBLEM: Network hang: "eth0: Tx timed out (f0080), is buffer full?"
    ... We had to reboot a server twice after a network card hang. ... The last minutes previous to the network hang and system hard reset ... Dec 8 10:43:25 urutu kernel: NETDEV WATCHDOG: eth0: transmit timed out ...
    (Linux-Kernel)
  • SBS 2000 SP1 (/SP4) system hang
    ... Each hard disk was an 72 GB Ultra 3 hard disk and the result ... while I believe I knew the location to move the cache configuration /drives ... they do not use ISA server anyway, (after the completion of the migration I ... manually with out the non-core service then starting that it did not hang ...
    (microsoft.public.windows.server.sbs)