Re: SBS 2003/RAID copy question

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I do not think the Adaptec card will allow this. It is not a RAID card, only
a SCSI controller. Please correct me if I am wrong.
--
Thanks for your help.


"Cliff Galiher" wrote:

You'll need to refer to the adaptec manual for that one. The last Adaptec I
used allowed you to build a mirror, so in theory, here is what I'd do:

1) Install a second hard drive.
2) In the Adaptec BIOS (before OS boot) configure the mirror.
3) Let the adapter actually build the RAID array. It'll take some time.
4) Pull the failing hard drive (breaking the mirror.)
5) Install another new hard drive.
6) Again in the Adaptec setup, have it rebuild the mirror. It'll know to
use the second hard drive since that already has the RAID info that would've
been written from the first build.

Should be painless. But different models of RAID controllers have different
feature sets and the system may fail to build an array after the fact
without wiping data. So have a backup, and take each step carefully.

-Cliff


"Northwest Upgrades Plus" <andyn@xxxxxxxxxxxxxxxxxx(donotspam)> wrote in
message news:F8988542-4BE4-48B7-B1F6-3A33C44CE95D@xxxxxxxxxxxxxxxx
I have a client that is running SBS 2K3 standard. When it was first set
up,
they did not want to go to the expense of mirroring the OS drive. (I tried
to
warn them!!!) Now, there are several bad sectors on the OS drive. I was
fortunately able to recover, but I would like to get it set up the way it
should be. Is there a way to install 2 new SCSI drives on the system,
mirror
them and then copy the existing C drive to them and then use them as the
boot
drives? They have an Adaptec Ultra 320 SCSI adapter, if that makes any
difference.
--
Thanks for your help.

.

Relevant Pages

  • Does Adaptec 2120S muck with cylinder zero, head zero (first track)?
    ... head zero (first track) of the first logical ... BootIt software on a RAID array using the Adaptec controller. ... machine, same hard drives, just pulled the SMART-2D, put in the Adaptec ...
    (comp.periphs.scsi)
  • RAID Mirror not fault tolerant, by Worried of Wales
    ... I've got a RAID 1 Mirror comprising 2 SATA drives, ... physical connector that is recognised as healthy by the nVidia nForce 2 RAID ... Went into Disk Management expecting the Initialize & Convert Disk Wizard to ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: RAID, partitioning and imaging
    ... Any partition created will be mirrored / identical in your second raid drive ... You are aware that raid 1 is a mirror?, and as such you should be able to ... mirror, and so the problem would exist on both drives, so ...
    (microsoft.public.windowsxp.general)
  • Re: RAID, partitioning and imaging
    ... You are aware that raid 1 is a mirror?, and as such you should be able to ... Not that raid mirror is an alternative to backup ... mirror, and so the problem would exist on both drives, so ...
    (microsoft.public.windowsxp.general)
  • Re: external SATA HD config/backup questions
    ... > run it by you guys before committing to the various drives etc. ... > I'm aneed a good backup solution for A and C, ... > 3 to mirror them on yet another RAID stripe. ... important it will be gone instantly from the mirror as well. ...
    (comp.sys.mac.system)