Re: Activesync between Windows Mobile 5 and SBS2003 gives error

I've tried a bunch of suggestions, none of them working. These are
both Microsoft products, they should work together. Should I post a
new thread since this is a different error message?

On Dec 8, 8:57 pm, "SteveB" <newsgr...@xxxxxxxxxx> wrote:
Just because you've had a problem configuring a smart phone with WM5 to sync
to SBS 2003 is no reason to make a general statement that WM5 is a pig to
sync with SBS 2003 and advise not using it. I've setup 10 or so different
smart phones with WM5 syncing just fine with SBS 2003.

"Andy Marston" <andymars...@xxxxxxxxx> wrote in message

news:cc0085cf-ca5e-474f-8e07-e2b7f1dd2637@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Dec 8, 7:29 pm, ldodero <ldod...@xxxxxxxxx> wrote:



Thanks for the reply. That did *something*, but now I'm getting a
different error:

Support Code: 0x85010004

"Your account in Microsoft Exchange Server does not have permission
to synchronize with your current settings. Contact your Exchange
Server Administrator"

Any ideas?

On Dec 5, 2:27 pm, "Cris Hanna [SBS MVP]"

<crisnospamha...@xxxxxxxxxxxxxxxxxxxxx> wrote:
The following has always worked for me.
1. export the cert from a workstation.
IE Properties > Content > Certificates > Trusted Root > select the cert
that
matches your URL for OWA > Export > accept all defaults

If you don't find a cert here that matches the URL for OWA, you need to
re-run the CEICW wizard on the SBS box and re-create the self signed
cert.

repeat number 1 otherwise,

2. Copy the file to the ROOT of the devices..in my experience it must be
at
that location
3. Using file explorer on the device, navigate to the root of the
device,
and find the file and tap it.
4. You should get a dialog box about installing the cert. Accept any
messages about installing.

Now kick off a synch on the device and see if it's successful

--
Cris Hanna [SBS - MVP]
Co-Author, Windows Small Business Server 2008
Unleashedhttp://www.amazon.com/Windows-Small-Business-Server-Unleashed/dp/0672...
------------------------------------
MVPs do not work for Microsoft
Please do not submit questions directly to me.

"ldodero" <ldod...@xxxxxxxxx> wrote in message

news:bdec11aa-faff-4fec-bf55-2a87bdefede1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello, I exported the certificate straight from the server. It's a
Treo 700wx running Windows Mobile 5. I put the file into "My
Documents" and installed the certificate from there. I dont' think the
URL on the certificate matches, I think it points to just the
domain.org whereas on RWW we connect to sbs2003.domain.org/remote. But
like I said, it hasn't been a problem on other servers we manage. I
can change the certificate if you want, how do I do that?

On Dec 5, 11:26 am, "Cris Hanna [SBS MVP]"

<crisnospamha...@xxxxxxxxxxxxxxxxxxxxx> wrote:
did you export this from the server or a workstation?
What version of Treo?
where did you put the file on the treo?

Again, we've ask several times does the url of the cert match exactly
to
the
URL you use when you OWA?

--
Cris Hanna [SBS - MVP]
Co-Author, Windows Small Business Server 2008
Unleashedhttp://www.amazon.com/Windows-Small-Business-Server-Unleashed/dp/0672...
------------------------------------
MVPs do not work for Microsoft
Please do not submit questions directly to me.

"ldodero" <ldod...@xxxxxxxxx> wrote in message

news:adbab522-8c01-4a10-bae7-29d7b7e9f9a5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I opened up MMC, CTRL M - Add - Certificates - trusted root
certification authorities - picked my certificate
(sbs2003.mydomain.org) right click - all tasks - export - export as
DER encoded binary X.509 (.cer) file name certificate.cer. I then
transferred it to the treo, clicked it on the Treo and it installed..
Still doesn't work.

On Dec 4, 11:10 pm, "SteveB" <newsgr...@xxxxxxxxxx> wrote:

If the cert is self issued what did you name it and how did you
install
it
on the Treo?

"ldodero" <ldod...@xxxxxxxxx> wrote in message

news:787eb1aa-73c1-4a44-bd48-9a0fa7492477@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hello, I'm trying to sync my Palm Treo using Windows Mobile 5 with
our
SBS2003 server. I've tried syncing three different Windows Mobile
devices and always get the same error:

Result: the security certificate on the server is invalid. Contact
your Exchange server administrator or ISP to install a valid
certificate on the server.

0x80072F0D

Certificate on phone is installed correctly.

All exchange features for user account are enabled according to
Server
Manager. (User - Properties -
Exchange Features tab).

In Exchange Server Manager, General Settings - Mobile Devices -
Properties, settings are as expected
(user initiated sync and direct push over http(s) are both turned
on,
no blocking device security
settings though I've tried tinkering with them).

Can successfully browse to https:\\sbs2003.iel.org\exchange

Permissions on IIS exchange virtual directories (there are 5 of
them
in default websites) appear to be
correct according to MS KB.

At this point, it could be some obscure error in one of three
areas:
Exchange, IIS, ISA (apparently ISA
can occasionally cause problems). I've done all kinds of things in
all three, but haven't been able to
see any noticeable progress.

Any ideas??- Hide quoted text -

- Show quoted text -

Hi Idodero,

I spent a *LOT* of time trying to get a customers WM5 Smartphone to
sync with his SBS2003 Server. No matter what I did, even with all the
certificates available, I could *NOT* get his WM5 device to sync. I
had exactly the same errors as you are getting. If I were you, I would
seriously think of using a different device. WM5 is a pig to sync to
SBS2003. I haven't tried WM6, but am told that it is better - i.e. you
can actually sync it. In the end, my customer upgraded to a Blackberry
under his contract with his phone operator, and has no problem syncing
the device with the USB cable, or over the air.

Sorry, I know it's not the news you want to hear.

Andy.

.

Relevant Pages

  • Re: Activesync between Windows Mobile 5 and SBS2003 gives error
    ... If you don't find a cert here that matches the URL for OWA, you need to re-run the CEICW wizard on the SBS box and re-create the self signed cert. ... I exported the certificate straight from the server. ... Treo 700wx running Windows Mobile 5. ...
    (microsoft.public.windows.server.sbs)
  • RE: SSL certificate not refreshing
    ... check the certificate on the Windows SBS server. ... registry key to use direct push with ISA 2000. ... Installing the Certificate on the Server ...
    (microsoft.public.windows.server.sbs)
  • Re: SSL Problems
    ... Chances are, when you installed the certificate, it got bound to the wrong ... and ran ssl diag and no errors came up and STILL ... > sites on my IIS server except for this one. ... >>> I am getting page cannot be displayed after installing ...
    (microsoft.public.inetserver.iis.security)
  • Re: Activesync between Windows Mobile 5 and SBS2003 gives error
    ... I exported the certificate straight from the server. ... Treo 700wx running Windows Mobile 5. ... your Exchange server administrator or ISP to install a valid ...
    (microsoft.public.windows.server.sbs)
  • Problems enabling smart card login on windows 2000
    ... After installing a windows 2000 server and a windows 2000 professional system from scratch ... Installing a Windows 2000 Server as a Domain Controller ... Setting up a Certificate Authority ...
    (microsoft.public.win2000.security)
Loading