Re: Connect a Wireless Router to my SBS Network

The error message I get when trying to connect to the wireless network is
"Windows was unable to find a certificate to log you onto the network
"wireless network name".


"SBS Golfer" <Mr.Bogus@xxxxxxxxxxxxxxx> wrote in message
news:%23z$EWqgPJHA.4312@xxxxxxxxxxxxxxxxxxxxxxx
Looks like the NG does not allow me to attach this word document. Can I
eamil it to you somewhere else? Thanks.

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:O1KPnPgPJHA.4224@xxxxxxxxxxxxxxxxxxxxxxx
This setup is the Airlink wireless attached to the 5-port switch?

Assumption: the DSL router-modem is 192.168.1.1

If so, try this...

LAN IP Address: 192.168.2.1
Static IP Address: 192.168.1.2
Static Subnet Mask: 255.255.255.0
Static Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: 192.168.1.1

----------------------------------------------------------
Internet
|
DSL Modem-Router
| |
| | Switch
| | Airlink Router (static, WAN side, 192.168.1.2)
| ||
| | Airlink Router (LAN side, 192.168.2.1)
| | | |
| Wireless clients
|
SBS External NIC (192.168.1.3)
||
SBS Internal NIC
||
Switch
| | | | |
SBS LAN Workstations
----------------------------------------------------------

--
Merv Porter [SBS-MVP]
============================


"SBS Golfer" <Mr.Bogus@xxxxxxxxxxxxxxx> wrote in message
news:u9xt3EgPJHA.3884@xxxxxxxxxxxxxxxxxxxxxxx
Thanks Merv. you're the greatest. Here is what I see and what I did.

LAN IP Address: 192.168.2.1
Static IP Address: external static ip
Static Subnet Mask: 255.255.255.248
Static Gateway: external gateway IP
Primary DNS: (points to my mail server providors DNS servers (SBS
Servers forwards DNS requsts to same IP's)
Secondary DNS


OK so now I'm almost there I think. I did the above and can now see my
wireless network when I do a search. It shows it is a "security-enabled
wireless network (WPA)". however when I go to connect it shows all bars
connected but appears it is in a "Validating Identity" state.

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:OWxkVyfPJHA.4708@xxxxxxxxxxxxxxxxxxxxxxx
I believe the Airlink has default IP of 192.168.1.1. Connect the
Airlink wireless unit directly to a "non-domain" spare laptop or
workstation (give the laptop a static IP of 192.168.1.10) and access the
Airlink web interface by typing in 192.168.1.1 in a browser window. Now
change the IP scheme of the Airlink to 192.168.2.x. Then change the
laptop IP to 192.168.2.10. You should be able to get backup to the
Airlink web interface now. Now turn on DHCP for the Airlink and set the
WAN IP to (static) 192.168.1.2. You may have want to select WPA
Personal (TKIP passphrase) for the security of the Airlink wireless.
Then connect the Airlink to the 5-port switch, set your laptop to get an
IP automatically and test to see if you can get a connection.

--
Merv Porter [SBS-MVP]
============================

"SBS Golfer" <Mr.Bogus@xxxxxxxxxxxxxxx> wrote in message
news:%23LxRrjfPJHA.4152@xxxxxxxxxxxxxxxxxxxxxxx
Hey Merv thanks for the input. My problem is that I can't get to the
browser interface of the wireless router and therefore cannot input
any information.


"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:%233U%23vyePJHA.4916@xxxxxxxxxxxxxxxxxxxxxxx
I suspect it the "LAN side" of your DSL modem-router that is
192.168.1.1. If you can't set the Airlink up as a WAP (Wireless
Acccess Point), you may need to use it as a router with it's WAN IP
set to 192.168.1.2 (static with GW 192.168.1.1); then change the
Airlink's LAN side IP range to 192.168.2.x with the LAN side of the
wireless router set to 192.168.2.1. After that, turn on DHCP for the
wireless portion and test. At that point, a wireless client should get
an IP address of 192.168.2.x.

--
Merv Porter [SBS-MVP]
============================


"SBS Golfer" <Mr.Bogus@xxxxxxxxxxxxxxx> wrote in message
news:O$jPgVePJHA.5044@xxxxxxxxxxxxxxxxxxxxxxx
OK so again I can ping 192.168.1.1 however I can get a repy from the
defualt IP whether or not the wireless is plugged in or not. So
there must be another device out there I'm getting a reply from.
I'm using my laptop with a static IP and a direct connection to the
10/100 5-port switch.


"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in
message news:%23maWyBePJHA.4304@xxxxxxxxxxxxxxxxxxxxxxx
Attach the Airlink to a port on your 5-port switch; give it a
static IP in the same range as the DSL router's LAN side and a
gateway of the DSL router itself; turn off any DHCP service on the
DSL router's LAN side; turn on the Airlink's DHCP service; test to
see if a laptop pick's up a wireless connection from the Airlink.

--
Merv Porter [SBS-MVP]
============================

"SBS Golfer" <Mr.Bogus@xxxxxxxxxxxxxxx> wrote in message
news:uAU605dPJHA.588@xxxxxxxxxxxxxxxxxxxxxxx
I got a AirLink 101 54 Mbps 802.11G Wireless Router I want to
attach to my SBS network. I'm a bit unsure as to where I need to
place the router to work best. Here's my environment......

SBS 2003 Premium SP2 w/2 Nics
ISA 2004 SP3

We use a 1.5MB T1 DSL connection for our internet access. Here is
the network topology layout...........

Inbound Internet --> DSL Router --> 10/100 5-port Switch -->
External NIC SBS Server ---> Outbound Internal NIC SBS Server --->
1GB Switch ---> Patch Panels

Now I use the 5-port Switch so that I can utilize my additional
external IP's for testing and being outside the firewall. I have 2
other Windows 2003 Standard member servers that I connect directly
into the 1GB Switch.

So my question is where along the line do I place the wireless
router. I tried removing the 10/100 5-port switch and placing it
there. I also tried connecting it to an available port on the
10/100 5-port Switch which would be outside my firewall which is
ok for me.

I would like to use this so that we can have wireless in our
conference room to accomodate guests and clients who have laptops.



















.

Relevant Pages

  • Re: Connect a Wireless Router to my SBS Network
    ... Secondary DNS: 192.168.1.1 ... You say you changed your laptop IP, but di you set up the Airlink router ... This setup is the Airlink wireless attached to the 5-port switch? ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect a Wireless Router to my SBS Network
    ... Secondary DNS: 192.168.1.1 ... You say you changed your laptop IP, but di you set up the Airlink router ... This setup is the Airlink wireless attached to the 5-port switch? ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect a Wireless Router to my SBS Network
    ... I believe the Airlink has default IP of 192.168.1.1. ... the laptop a static IP of 192.168.1.10) and access the Airlink web interface ... Airlink wireless. ... browser interface of the wireless router and therefore cannot input any ...
    (microsoft.public.windows.server.sbs)
  • Re: Linksys, NO HELP!
    ... trying to get my wireless network up & running, ... >and a WPC54G notebook adapter in my laptop! ... >installation of the router went very smoothly, ... or just scan for the neighbors wireless access points. ...
    (alt.internet.wireless)
  • Re: Connect a Wireless Router to my SBS Network
    ... LAN IP Address: 192.168.2.1 ... wireless network when I do a search. ... wireless unit directly to a "non-domain" spare laptop or workstation (give ... scheme of the Airlink to 192.168.2.x. ...
    (microsoft.public.windows.server.sbs)
Loading