RE: sbs 2003 SP2
- From: Frank F <flteng56@xxxxxxxxxxx>
- Date: Wed, 17 Sep 2008 00:58:08 -0700
Hi all,
I installed Exchange SP2 (Single Server) with no problems noted
--
Frank
""Robbin Meng [MSFT]"" wrote:
.
Hello Frank,
Thank you for your post.
Please allow me to confirm that my understandings are correct. As I
understand it, the issue is:
You would like to know if it is proper to install Exchange 2003 Service
Pack 2 on your SBS Exchange 2003 server directly and skip the Exchange 2003
Service Pack 1 and later hotfixes.
If I have misunderstood your concerns please feel free to let me know.
Generally, as Dave indicated, we don't have to first install SP1 before SP2
installation. However if you have multi Exchange 2003 servers in your
domain and have front-back end structure, please note that before you apply
Exchange Server 2003 SP2 to a new Exchange front-end server, make sure that
you apply the required service packs and hotfixes to bring both the
front-end and back-end servers to the same update level. For example, if
you still have a back-end server that is running SP1, you must apply SP1 to
your front-end server before you apply SP2.
As Exchange server 2003 SP2 cannot be removed manually once installed,
please perform a fully SBS backup before your installation. Also run SBS
BPA tool both before and after SP2 installation as Larry mentioned.
Backing Up and Restoring Windows Small Business Server 2003
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=4877
36f8-f6f5-436d-a82d-0c8d66e2a634
TechNet Webcast: Overview of Microsoft Exchange Server 2003 Service Pack 2
Administration Features (Level 300)
http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?culture=en-US&Eve
ntID=1032281975&CountryCode=US
Hope this helps. Also, if you have any questions or concerns, please do not
hesitate to let me know.
Thank you for your time and cooperation.
Best regards,
Robbin Meng(MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
- Follow-Ups:
- RE: sbs 2003 SP2
- From: "Robbin Meng [MSFT]"
- RE: sbs 2003 SP2
- References:
- sbs 2003 SP2
- From: Frank
- RE: sbs 2003 SP2
- From: "Robbin Meng [MSFT]"
- sbs 2003 SP2
- Prev by Date: SBS 2008: Supported Networking Topology
- Next by Date: Spam Filter, Disk based Backup device - Great FREE product and lots of "How to" resources
- Previous by thread: RE: sbs 2003 SP2
- Next by thread: RE: sbs 2003 SP2
- Index(es):
Relevant Pages
|
Loading
