Re: Trouble integrating existing SBS 2003 server into a home netwo

OK, let's look at that "wireless router" that was on the home network before
you staerted this adventure. What make/model is it and who is the Internet
Service provider?

Do you have a switch in the mix or are there enough free ports on the
wireless router to accomodate all required wired connections for the "new"
network workstations?

Reconfigure the network according to (SBS single NIC configuration):

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

Turn off DHCP on the wireless router (and ICS on any of the workstations, if
it's on). Connect the SBS server NIC to a port on the wired router and
re-run CEICW. Reboot the workstations and the SBS server and then post an
ipconfig /all for one (wired) workstation and for the SBS server itself.

--
Merv Porter [SBS-MVP]
============================

"Jbarrick" <Jbarrick@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:31351985-E104-498C-9013-431F0178C759@xxxxxxxxxxxxxxxx
Yes.

I also then rebooted each computer including the SBS.




"Merv Porter [SBS-MVP]" wrote:

When you set it and everything worked except Internet Access, did you
re-run
CEICW?

--
Merv Porter [SBS-MVP]
============================

"Jbarrick" <Jbarrick@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1F2AC524-12E1-4E29-93C7-BE5570B10158@xxxxxxxxxxxxxxxx
I did this and the network all worked. Every workstation and network
printer
was working within the network great.

However, there was no internet service at all, including wireless.

So, I changed everything back the way it was, and I'm back to square
one.





"Merv Porter [SBS-MVP]" wrote:

Set all workstations to get their IP address autmatically. Set the
LAN
side
of the router to be in the same IP range as the SBS server
(192.168.5.x).
Then see the follwoing article for network setup...

How to configure Internet access in Windows Small Business Server 2003
(Use the Single Network Adapter [NIC] configuration)
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

Turn off the DHCP service on the router and let the SBS server handle
DHCP
for the entire network. You should only need 2 DNS Nameserver IP
addresses
which will be used as "forwarders" in the CEICW setup. Most probably
68.105.28.11 and 68.105.28.12 will suffice. Then re-run CEICW, click
on
Enable the firewall, select your services and finish the rest of
CEICW.
Then reboot all workstations and let them acquire a new IP address
from
the
SBS server.

CEICW Walkthrough
(for 2 NICs but almost everything applies to a single NIC
configuration)
http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm

--
Merv Porter [SBS-MVP]
============================

"Jbarrick" <Jbarrick@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:08753DA2-6A7A-405A-A1B4-311D5A10A85A@xxxxxxxxxxxxxxxx
Results of uncooperative workstation:

Windows IP Configuration

Host Name Workstation02
Primary DNS Suffix Domain.local
Node Type Broadcast
IP Routing Enabled Yes
WINS Proxy Enabled Yes
DNS Suffix Search List Domain.local
isp.net

Ethernet adapter Server Local Area Connection

Connection-specific DNS suffix isp.net
Description Realtek RTL8168/8111
PCI-E
Gigabit Ethernet NIC
Physical Address 00-1E-90-23-53-C0
DHCP enabled Yes
Autoconfiguration enabled Yes
IP address 192.168.1.102
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.168.1.1
DNS Servers 68.105.28.12
68.105.29.12
68.105.28.11

Lease Obtained Date

Lease Expires Date

---------------------------

Results of a working workstation:

Windows IP Configuration

Host Name Workstation12
Primary DNS Suffix Domain.local
Node Type Broadcast
IP Routing Enabled Yes
WINS Proxy Enabled Yes
DNS Suffix Search List Domain.local
isp.net

Ethernet adapter Server Local Area Connection

Connection-specific DNS suffix isp.net
Description VIA Rhine II Fast
Ethernet
Adapter
Physical Address 00-13-8F-6F-E8-D6
DHCP enabled Yes
Autoconfiguration enabled Yes
IP address 192.168.1.103
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DHCP Server 192.168.1.1
DNS Servers 68.105.28.12
68.105.29.12
68.105.28.11

Lease Obtained Date

Lease Expires Date


"Larry Struckmeyer [SBS-MVP]" wrote:

Hi:

We can do this through this newsgroup, but it honestly would be
simpler
for
you and less headaches if you brought in a local SBS specialist.
Your
time
must be worth something. If you will tell us where you are you may
get a
specialist here, or one of us may be able to recommend one.

If you desire to continue down this path, we will need to take this
in
baby
steps. The first one is to post the unedited results of the
command:

ipconfig /all > c:\iptest.txt

from the server and the un cooperative station. Please tell us
which
is
which, and on the server indicate the internal nic card and the
external
nic
card.

I won't be able to spend the night here, but you can expect on
going
assistance from others.

--
Larry

Please post the resolution to
your issue so that all can benefit.


"Jbarrick" <Jbarrick@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:02DE5CA7-F7F9-42A4-9390-3B8A1F4BC5AC@xxxxxxxxxxxxxxxx
I need to add an existing SBS 2003 server to an existing home
network.

At home there is a XP Professional computer connected (via
ethernet
cable)
to a wireless router, which is connected to a cable modem.

I need to add a SBS 2003 server and three workstations (XP
Professional)
that were part of an office network elsewhere. The data of the
office
network needs to remain intact. The idea is to relocate the
network
at
home
and add the computer that was here to the domain of the server.

Currently I have the Server and workstations (that had been part
of
the
domain) connected to a Netgear 26 Port switch, which is connected
to
the
wireless router.

I don't get the Internet on the server itself. Two of the three
workstations are able to connect to the server and the Internet.
The
other
workstation connects to the Internet but not the server.

I'm pretty inexperienced when it comes to DHCP and TCP/IP.
However,
everything seems to be set up exactly the same between the three
workstation.

I'm pretty sure that I will need to establish an Internet
connection
on
the
server for the Exchange Server to work properly.

HELP











.

Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect the SBS to a remote IIS for Internet Printing
    ... the server can access the Internet with no problems at all. ... Checking network connection, and after a few seconds it says The ... the problem is cause by the configuration of ISA. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2006 Basic Configuration
    ... Why would we point Preferred DNS to itself? ... Configuring the Internal Network Interface ... In the Internet Protocol Properties dialog box, ... Select the Use the following DNS server addresses option. ...
    (microsoft.public.isa.configuration)
  • RE: Server Re-Setup Help
    ... This newsgroup only focuses on SBS technical issues. ... If you setup network like above, ... server is transferred in internet since they have different public IP. ...
    (microsoft.public.windows.server.sbs)
  • Re: One computer on 2 networks
    ... On the server take the new "internet Nic" and set it up properly for the ... Create a static route in the OS's routing table that uses the LAN Router ... don't work in the Network Admin Dept. I'm a developer. ...
    (microsoft.public.windows.server.networking)