Re: Event ID 1050 and 1030

On 18 Aug, 09:10, TrickyT <wigwam...@xxxxxxxxxxxxxx> wrote:
On 16 Aug, 15:12, TrickyT <wigwam...@xxxxxxxxxxxxxx> wrote:



On 16 Aug, 13:56, "Marina Roos [SBS-MVP]"

<mar...@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hi Trevor,

If you are still getting the errors, then yes, I would reboot the server.
You also need to install SP2 for Exchange which should have been installed
ages ago. Rerun the SBS BPA.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M'swww.smallbizserver.net
Take part in SBS forum:http://www.smallbizserver.net/Default.aspx?tabid=53"TrickyT"; <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:dc7dcbb6-8590-4679-866d-47c79462de2b@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 16 Aug, 12:56, "Marina Roos [SBS-MVP]"
<mar...@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hi Trevor,

The SBS BPA is giving you enough clues which should be solved. The
windows
firewall service should NOT be enabled and is most likely the main
culprit
of your errors.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M'swww.smallbizserver.net
Take part in SBS
forum:http://www.smallbizserver.net/Default.aspx?tabid=53"TrickyT";
<wigwam...@xxxxxxxxxxxxxx> wrote in message

news:ca443a3a-7496-4457-81c9-2aea94c21e15@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 15 Aug, 22:45, "Marina Roos [SBS-MVP]"
<mar...@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hi Trevor,

Please post the ipconfig/all from the server and run the SBS BPA tool.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M'swww.smallbizserver.net
Take part in SBS
forum:http://www.smallbizserver.net/Default.aspx?tabid=53"TrickyT";
<wigwam...@xxxxxxxxxxxxxx> wrote in message

news:94852d46-38be-4cba-a0f8-713d62d40165@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 15 Aug, 18:33, "Gregg Hill" <greggmhill at please do not spam me
at
yahoo dot com> wrote:
Did you manually change the IP, or did you use the Change IP
wizard?

Gregg Hill

"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:2bfb275d-528c-4042-b1c4-0f0fe507b8e8@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 15 Aug, 17:54, "Matabra" <Mata...@xxxxxxxxxxxxxxxxxxxx> wrote:
Hi Tricky,

Have you tried rebooting the server since you changed the IP
address?

This normally indicates a problem with DNS.

Rebooting should restore the DNS entrys for AD

Regards,

MAtt

"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:b397347c-f301-4e5e-a939-3044dfe2dae1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I have done some recent modifications to a clients SBS 2003

I changed the IP address of the Server from 192.168.1.2
(255.255.255.0) to 192.168.16.2 (255.255.255.0)

This was due to an issue with Remote Access and users having
the
same
IP range on their home routers as the server.

I also enabled the second NIC card and gave it an address of
172.16.0.2 (255.255.0.0)

I ran the internet and email wizard and enabled the firewall.

Ever since I have had the following event ID in Event Viewer
every 5
minutes

1050

Windows cannot access the file gpt.ini for GPO
CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=BANCUMM,DC=local.
The file must be present at the location
<\\BANCUMM.local\sysvol
\BANCUMM.local\Policies
\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>.
(Configuration
information could not be read from the domain controller,
either
because the machine is unavailable, or access has been
denied. ).
Group Policy processing aborted.

1030

Windows cannot query for the list of Group Policy objects.
Check
the
event log for possible messages previously logged by the
policy
engine
that describes the reason for this.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

I also get an issue if I try to access GPO with the following
messages

Cannot access group policies

Group policy management

Group policy Error

Failed to open the group policy object. You man not have
appropriate
rights

Details

Configuration information could not be read from the domain
controller, eihter because the machine is unavailable, or
access
has
been denied

Group policy objects

Group policy management

The newtrok path was not found

Any help appreciated.

Regards

Trevor

Matt

The server has actually been rebooted twice. once following the
IP
change and again after Trend CSM had to be reinstalled as it
would
not
recognise the new IP.

Regards

Trevor

As with everything I do on SBS 2003, I used the wizard if one
exists.

Regards

Trevor

Here are my setting

Here are my settings

Ethernet adapter Network Connection

Connection-specific DNS Suffix
Description Broadcom NetXetreme Gogabit Ethernet #2
Physical Address xx-xx-xx-xx-xx-xx
DHCP Enabled NO
IP Address 172.16.0.2
Subnet Mask 255.255.0.0
Default Gateway 172.16.0.254
DNS Servers 192.168.16.2
NetBIOS over TCPIP Disabled

Ethernet adapter Server Local Area Connection

Description Broadcom NetXetreme Gigabit Ethernet
Physical Address xx-xx-xx-xx-xx-xx
DHCP Enabled NO
IP Address 192.168.16.2
Subnet Mask 255.255.255.0
Default Gateway
DNS Servers 192.168.16.2
Primary WINS Server 192.168.16.2

The output XML file from the SBS BPA is 2mb is size so I cannot post
it here.

I have put a copy here if anyone wants to investigate.

http://www.mediafire.com/?sharekey=8e2907697cda657fd2db6fb9a8902bda

Regards

Trevor

I have addressed the following issues as per the SBS BPA.

Reverse DNS Zone

Disables Internet Connection Sharing

Internal Internet Adapter Not Configured To Register IP Address In DNS

The only outstanding issues are

Microsoft Exchange Server 2003 SP 1 is Running

OWA Update For Exchange Server Is Not Installed

Windows SBS 2003 Service Pack 1 Is Running

Do I need to reboot the server for these changes to take effect?

Regards

Trevor

Thanks, will reboot the Server when I get the Ok from my client that
they are not using it.

I have WSUS installed so assumed that anything required would be
downloaded and installed.

Will investigate.

Regards

Trevor

I have rebooted the server, but still get my original error messages
for Event ID 1030 and 1050. I still cannot also manage anything in
GPO.

I think the GPO issue may be why 2 clients have not reported under
WSUS

I have run SBS BPA and only have the error relating to

Microsoft Exchange Server 2003 SP 1 is Running
OWA Update For Exchange Server Is Not Installed
Windows SBS 2003 Service Pack 1 Is Running

What else can I try?

Trevor

I have also noticed the following in

dnsmgmt
DNS
SERVER
Forward Lookup Zones

I appear to have 2 active directories

_msdcs.BANCUMM.local
Bancumm.local

Regards

Trevor
.

Relevant Pages

  • RE: trouble installing companyweb
    ... gone ahead and patched the server before continuing with step 13 of KB884453. ... sbs components that I could, ... install any 3rd-party software before you finish the installation. ... For the failed intranet component ...
    (microsoft.public.windows.server.sbs)
  • RE: Monitoring and Reporting
    ... I understand that you unable to get SBS ... monitoring report after you install Windows server 2003 sp2. ... To successfully install SBS 2003 SP1, ... Downloading and Installing Windows Small Business Server 2003 Service Pack 1 ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 R2 - Please Help
    ... computers be slow after you install the full SBS 2003 R2 components. ... log on slow is probably refer to incorrect DNS ... as the DNS server on the clients rather than the ISP DNS servers. ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 Fax Sharepoint Routing
    ... Business Server 2003 and click "Change/Remove", ... If the Fax Services component was original installed by using the SBS ... Install fro the Fax Server component. ... And then we should push the shared fax client application from server to ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot activate SBS 2003 SP2
    ... slip stream SBS you would have had it ages ago. ... How did they buy this Server? ... My main reason for slipstreaming the install is because I cannot get the ...
    (microsoft.public.windows.server.sbs)
Loading