Re: Event ID 1050 and 1030

On 15 Aug, 22:45, "Marina Roos [SBS-MVP]"
<mar...@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hi Trevor,

Please post the ipconfig/all from the server and run the SBS BPA tool.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M'swww.smallbizserver.net
Take part in SBS forum:http://www.smallbizserver.net/Default.aspx?tabid=53"TrickyT"; <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:94852d46-38be-4cba-a0f8-713d62d40165@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 15 Aug, 18:33, "Gregg Hill" <greggmhill at please do not spam me at
yahoo dot com> wrote:
Did you manually change the IP, or did you use the Change IP wizard?

Gregg Hill

"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:2bfb275d-528c-4042-b1c4-0f0fe507b8e8@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On 15 Aug, 17:54, "Matabra" <Mata...@xxxxxxxxxxxxxxxxxxxx> wrote:
Hi Tricky,

Have you tried rebooting the server since you changed the IP address?

This normally indicates a problem with DNS.

Rebooting should restore the DNS entrys for AD

Regards,

MAtt

"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message

news:b397347c-f301-4e5e-a939-3044dfe2dae1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I have done some recent modifications to a clients SBS 2003

I changed the IP address of the Server from 192.168.1.2
(255.255.255.0) to 192.168.16.2 (255.255.255.0)

This was due to an issue with Remote Access and users having the
same
IP range on their home routers as the server.

I also enabled the second NIC card and gave it an address of
172.16.0.2 (255.255.0.0)

I ran the internet and email wizard and enabled the firewall.

Ever since I have had the following event ID in Event Viewer every 5
minutes

1050

Windows cannot access the file gpt.ini for GPO
CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=BANCUMM,DC=local.
The file must be present at the location <\\BANCUMM.local\sysvol
\BANCUMM.local\Policies
\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Configuration
information could not be read from the domain controller, either
because the machine is unavailable, or access has been denied. ).
Group Policy processing aborted.

1030

Windows cannot query for the list of Group Policy objects. Check the
event log for possible messages previously logged by the policy
engine
that describes the reason for this.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

I also get an issue if I try to access GPO with the following
messages

Cannot access group policies

Group policy management

Group policy Error

Failed to open the group policy object. You man not have
appropriate
rights

Details

Configuration information could not be read from the domain
controller, eihter because the machine is unavailable, or access has
been denied

Group policy objects

Group policy management

The newtrok path was not found

Any help appreciated.

Regards

Trevor

Matt

The server has actually been rebooted twice. once following the IP
change and again after Trend CSM had to be reinstalled as it would not
recognise the new IP.

Regards

Trevor

As with everything I do on SBS 2003, I used the wizard if one exists.

Regards

Trevor

Here are my setting

Here are my settings

Ethernet adapter Network Connection

Connection-specific DNS Suffix
Description Broadcom NetXetreme Gogabit Ethernet #2
Physical Address xx-xx-xx-xx-xx-xx
DHCP Enabled NO
IP Address 172.16.0.2
Subnet Mask 255.255.0.0
Default Gateway 172.16.0.254
DNS Servers 192.168.16.2
NetBIOS over TCPIP Disabled


Ethernet adapter Server Local Area Connection

Description Broadcom NetXetreme Gigabit Ethernet
Physical Address xx-xx-xx-xx-xx-xx
DHCP Enabled NO
IP Address 192.168.16.2
Subnet Mask 255.255.255.0
Default Gateway
DNS Servers 192.168.16.2
Primary WINS Server 192.168.16.2

The output XML file from the SBS BPA is 2mb is size so I cannot post
it here.

I have put a copy here if anyone wants to investigate.

http://www.mediafire.com/?sharekey=8e2907697cda657fd2db6fb9a8902bda

Regards

Trevor
.

Relevant Pages

  • RE: Win 2K and Win XP connections via VPN - grr....!!
    ... > I understand that you have two remote client workstations, one is Windows ... logged in via VPN but cannot see any of the server netbios names (DNS ... Ethernet adapter Local Area Connection: ... Ethernet adapter Wireless Network Connection: ...
    (microsoft.public.windows.server.sbs)
  • Re: Does anybody have a any idea of why i lost RDP ?
    ... >> Cannot Open http://SBS_IP/remote in Internet Explorer after VPN ... > have you configured the VPN server to allocate IP addresses and subnets to ... >> Ethernet adapter Internal Server Local Area Connection: ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: DNS failure
    ... Ethernet adapter Internet Connection: ... Ethernet adapter Local Area Connection: ... I think the 'DHCP enabled on the server NIC; No' says it all, ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN Connects, then I hit a wall
    ... Make sure that RRAS is assigning an IP from the SBS DHCP server. ... "Brian W." ... Below is the IPconfig/all from the connection. ... > Ethernet adapter Wireless Network Connection: ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Loosing network access to XP boxes
    ... Enable DHCP on the SBS server and set your clients to obtain an IP and DNS ... > Ethernet adapter Server Local Area Connection: ... > Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
Loading