Re: Event ID 1050 and 1030
- From: TrickyT <wigwam326@xxxxxxxxxxxxxx>
- Date: Fri, 15 Aug 2008 14:01:17 -0700 (PDT)
On 15 Aug, 18:33, "Gregg Hill" <greggmhill at please do not spam me at
yahoo dot com> wrote:
Did you manually change the IP, or did you use the Change IP wizard?
Gregg Hill
"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message
news:2bfb275d-528c-4042-b1c4-0f0fe507b8e8@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On 15 Aug, 17:54, "Matabra" <Mata...@xxxxxxxxxxxxxxxxxxxx> wrote:
Hi Tricky,
Have you tried rebooting the server since you changed the IP address?
This normally indicates a problem with DNS.
Rebooting should restore the DNS entrys for AD
Regards,
MAtt
"TrickyT" <wigwam...@xxxxxxxxxxxxxx> wrote in message
news:b397347c-f301-4e5e-a939-3044dfe2dae1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have done some recent modifications to a clients SBS 2003
I changed the IP address of the Server from 192.168.1.2
(255.255.255.0) to 192.168.16.2 (255.255.255.0)
This was due to an issue with Remote Access and users having the same
IP range on their home routers as the server.
I also enabled the second NIC card and gave it an address of
172.16.0.2 (255.255.0.0)
I ran the internet and email wizard and enabled the firewall.
Ever since I have had the following event ID in Event Viewer every 5
minutes
1050
Windows cannot access the file gpt.ini for GPO
CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=BANCUMM,DC=local.
The file must be present at the location <\\BANCUMM.local\sysvol
\BANCUMM.local\Policies
\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Configuration
information could not be read from the domain controller, either
because the machine is unavailable, or access has been denied. ).
Group Policy processing aborted.
1030
Windows cannot query for the list of Group Policy objects. Check the
event log for possible messages previously logged by the policy engine
that describes the reason for this.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
I also get an issue if I try to access GPO with the following messages
Cannot access group policies
Group policy management
Group policy Error
Failed to open the group policy object. You man not have appropriate
rights
Details
Configuration information could not be read from the domain
controller, eihter because the machine is unavailable, or access has
been denied
Group policy objects
Group policy management
The newtrok path was not found
Any help appreciated.
Regards
Trevor
Matt
The server has actually been rebooted twice. once following the IP
change and again after Trend CSM had to be reinstalled as it would not
recognise the new IP.
Regards
Trevor
As with everything I do on SBS 2003, I used the wizard if one exists.
Regards
Trevor
.
- Follow-Ups:
- Re: Event ID 1050 and 1030
- From: Marina Roos [SBS-MVP]
- Re: Event ID 1050 and 1030
- References:
- Event ID 1050 and 1030
- From: TrickyT
- Re: Event ID 1050 and 1030
- From: Matabra
- Re: Event ID 1050 and 1030
- From: TrickyT
- Re: Event ID 1050 and 1030
- From: Gregg Hill
- Event ID 1050 and 1030
- Prev by Date: Re: Exchange server super duper slow
- Next by Date: Re: Event ID 1050 and 1030
- Previous by thread: Re: Event ID 1050 and 1030
- Next by thread: Re: Event ID 1050 and 1030
- Index(es):
Relevant Pages
|
