Re: Routing IP cameras to internet



He was not satisfied with the frame rate and image clarity using that method
during an earlier test. I think our ADSL upstream and downstream compete for
bandwidth with poor results. I thought direct routing might improve the
quality by reducing bandwidth overhead.

"Bill Sanderson" wrote:

Why not have the boss connect via VPN?

"OrthoResearch" <OrthoResearch@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:18E51D8B-C480-4F82-BC67-60C90C745E92@xxxxxxxxxxxxxxxx
Searched these forums and i haven't found this topic discussed:

SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. Firewall
cabled to netopia 3364N in bridge mode acting as ADSL modem only. Standard
SBS service ports pass firewall packets to sbs server WAN. SBS server has
simple NAT only.

ISP AT&T provides ADSL w/ 7 Public static IPs 68.xxx.xxx.161 through .167
where .166 is considered gateway and .167 broadcast. Netgear firewall WAN
IP
set at 68.xxx.xxx.165, mask *.248, GW *.166.

4 surveillance IP cameras (each has onboard webservers) have internal
private static IP addresses assigned 192.168.xxx.121 through .124
Internal workstation IP surveillance software is pointed to internal IPs
to
gather images from cameras during security events. Works great!

Boss wants to see cameras from home during event. Trying to securely
connect
routable IP 68.xxx.xxx.161 to internal IP 192.168.xxx.121. I am unsure how
to
get hardware firewall to see packets at 68.xxx.xxx.161 to route them to
SBS
server WAN NIC. Then I am unsure how to configure NAT to hand packets to
Camera webserver at 192.168.xxx.121.

Your guidance is appreciated. Thank you.

.



Relevant Pages

  • Re: Routing IP cameras to internet
    ... quality by reducing bandwidth overhead. ... SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. ... SBS service ports pass firewall packets to sbs server WAN. ... gather images from cameras during security events. ...
    (microsoft.public.windows.server.sbs)
  • Re: Routing IP cameras to internet
    ... I thought direct routing might improve the quality by reducing bandwidth overhead. ... SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. ... SBS service ports pass firewall packets to sbs server WAN. ... gather images from cameras during security events. ...
    (microsoft.public.windows.server.sbs)
  • Re: Routing IP cameras to internet
    ... SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. ... SBS service ports pass firewall packets to sbs server WAN. ... gather images from cameras during security events. ...
    (microsoft.public.windows.server.sbs)
  • Re: Routing IP cameras to internet
    ... SBS2003STD 2NICs with Netgear FVS318 Prosafe firewall router. ... Firewall cabled to netopia 3364N in bridge mode acting as ADSL modem only. ... Standard SBS service ports pass firewall packets to sbs server WAN. ... Internal workstation IP surveillance software is pointed to internal IPs to gather images from cameras during security events. ...
    (microsoft.public.windows.server.sbs)
  • Re: ADSL PPPoA using a bridged ADSL router?
    ... The corresponding bug on an ADSL card would probably require a physical ... > live out in the countryside) the router doesn't come back up until I ... I'm not intending to change the linux kernel on the ADSL card box ... > dual firewall design, the simple ADSL firewall connected to a DMZ on ...
    (uk.comp.os.linux)