Re: Disk Management -> Canot create a mirrored volume

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Software RAID on Windows 2003 - Part1
http://www.netadmintools.com/art439.html

You secondary disk must be at least as large as the primary disk and
unallocated. Even though both disks are labeled as "250 GB", one might be
slightly smaller than the other. This can cause problems and is why it's
best to use drives from the same manufacturer and model number.

--
Merv Porter [SBS-MVP]
============================

"Pedro Tiago Lopes" <PedroTiagoLopes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:E09AAF71-10A2-4BBE-AEAE-86F77B1CA8E9@xxxxxxxxxxxxxxxx
Hello,

the option cretae a mirror is not available, even after i convert it to
dynamic disk...
can you help me?is there any other tools that i can use tomake the
mirroring?

thanks


.

Relevant Pages

  • Solaris RAID failover problems
    ... My intent is to mirror the drives completely, ... Can't read disk label. ... WARNING: md: d10: needs maintenance ... WARNING: forceload of misc/md_trans failed ...
    (comp.unix.solaris)
  • Re: Huge Av Disk Queue Length
    ... Write performance = 130 per mirror ... Mixed performance at a 1:1 R:W ratio = 195 IOPS per mirror. ... (sort of like weighted fair queuing for disk performance). ... put a 3020 in each location with FCP shelves for the primary data and SATA ...
    (microsoft.public.exchange.admin)
  • Loader does not load after reinstall with previous mirrored disk attached
    ... I purchased a second 500GB SATA disk. ... fix boot0 so it does not look for a mirror, ... Because I never disconnected the secondary disk (from the original ... loader and the previous loader were in conflict at boot. ...
    (freebsd-questions)
  • Re: how i locate swap area
    ... what you have with the command 'vgdisplay -v vg00'. ... Why Mirror Copies is 0? ... it seems that you have no disk mirroring. ... Primary Partition Table: ...
    (comp.sys.hp.hpux)
  • Re: Using mirroring to replace drive?
    ... I upgrade and rebuild it. ... drive which happens to be the system disk. ... and mirror the failing drive on the new drive. ... upgrade to 7.0 after establishing the new good drives). ...
    (freebsd-questions)