Re: Networking Question - VLAN's on SBS 2003 Premium SP1

Hi Mike,

Thank you for your email.

1. The network configuration on the SBS is properly.

2. From the event log, I find the following error:
================
Event Type: Error
Event Source: DhcpServer
Event Category: None
Event ID: 1053
Date: 7/17/2008
Time: 2:02:52 AM
User: N/A
Computer: WCT
Description:
The DHCP/BINL service on this computer running Windows Server 2003 for
Small Business Server has encountered another server on this network with
IP Address, 192.168.1.1, belonging to the domain: .
================

I suggest you navigate to the following registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Dhcpserver\Parameters

On the Edit menu, click New->DWORD Value, and then add the following
registry value:

Value name: DisableRogueDetection
Data type: REG_DWORD
Radix: Binary
Value data: (Hexadecimal) 1, which will be saved as 0x00000001

Restart the server. Then, test this issue.

3. Then, please ensure you run the CEICW again as I suggested:

a. On the SBS 2003 Server open the Server Management console. Go to
Standard Management\To Do List.
b. Click the "Connect to the Internet" link.
c. On the Connection Type page, click Broadband, and then click Next.
d. On the Broadband Connection page, under My server uses, click A local
router device with an IP address, and then click Next.
e. On the Router Connection page, next to Preferred DNS server and
Alternate DNS server, type the IP addresses that are provided by your ISP.
In the Local IP address of router box, type the IP address (192.168.1.1) of
the router that the server uses to connect to the router.
f. Click to clear the My server uses a single network connection for both
Internet access and the local network check box, and then click Next.
g. On the Network Connection, You must enable and configure the network
connection to your ISP page, under the Connection Name, click Network
Connection.
h. Click Use the following IP address, and then type the IP address
(192.168.1.10) and the subnet mask in accordance with the router settings.
The default gateway is the IP address of the router (192.168.1.1).
i. Click Next.

The network connection is now enabled.
j. On the Network Connection, You must click the connection for your ISP
and local network page, click Network Connection under the ISP network
connection.
k. Under the Local network connection, click Server Local Area Connection,
and then click Next.
l. Complete the Configure E-mail and Internet Connection Wizard.

4. If the issue persists, I think the probably reason is the hardware: SBS
external NIC, or cable, or the router port.

Please try to replace the cable, and connect the SBS to another LAN port of
the router.

If we cannot resolve the issue after we perform the steps above, please
help me collect MPS report again.

I hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
Newsgroups: microsoft.public.windows.server.sbs
From: v-terliu@xxxxxxxxxxxxxxxxxxxx (Terence Liu [MSFT])
Organization: Microsoft
Date: Thu, 17 Jul 2008 12:19:24 GMT
Subject: Re: Networking Question - VLAN's on SBS 2003 Premium SP1
X-Tomcat-NG: microsoft.public.windows.server.sbs
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Email from customer:
=====================

Subject: Networking Question - VLAN's on SBS 2003 Premium SP1

Here's the CAB file. I was unable to Ping the router. When I hooked up a
laptop to the router and set to to get an IP via DHCP, it got an IP from
the server vice the router.



.

Relevant Pages

  • Re: Cant Connect Computers
    ... the router manaully. ... You only have a single NIC in the SBS server. ... you must rely on a firewall device to protect your network. ... When I run the internet connection wizard, it tells me that a Universal ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Cant Connect Computers
    ... the router manaully. ... You only have a single NIC in the SBS server. ... you must rely on a firewall device to protect your network. ... When I run the internet connection wizard, it tells me that a Universal ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Connection from remote computer to network SQL Server
    ... I tried making the SQL machine a "trusted" on the router. ... data source and the server you want to connect to. ... a long pause before a screen comes up telling me the connection has failed ... It's also a good idea to add Network Library=DBMSSOCN; ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Outgoing POP3 email missing/lost/not received
    ... Funny thing is that I have had this ISP for 8 years and it has always been ... It looks like when you last ran CEICW, you set the ISP's mail server to: ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • RE: Cannot Connect via remote desktop
    ... Again if I put the url vpn.xxxxx.co.uk it takes me straight to the router ... Two network adapters - UPnP router connection to broadband ... Before you run the Configure E-mail and Internet Connection Wizard, ... Click to clear the My server uses a single network connection for both ...
    (microsoft.public.windows.server.sbs)