SBS Warning: Routable IP Address



During installation of SBS I get the warning:

The network adapter selected to access the local network is assigned a
routable IP address. As a result, the DHCP service on the server cannot be
installed and then configured by Setup. It is recommended that you use a
private IP address for your server's local network adapter, as this is a more
secure configuration.

Here are the settings on our network:
SBS: 172.200.0.5
AD Server: 172.200.0.1
Gateway: 172.200.0.1
DHCP: 172.200.0.50 and up

Should we use different IP addresses? Note that we have about 10 devices
with static IPs and maybe another two dozen devices with DHCP. What would we
have to do if we keep these IP addresses?
.



Relevant Pages

  • Re: SBS 2003 - installation at ISP site
    ... life connections with a hub or something. ... Default SBS will want it to give ... > #2 Network Adapter should be either disabled or given an intranet address ... for which I need help:> If the installation sees 1 Network Adapter it gives it the intranet address>; and I cannot modify that;> If the installation sees 2 Network Adapter with one disabled it refuses to go on. ...
    (microsoft.public.windows.server.sbs)
  • Re: Is it IE6 or my ISP? Page cannot be displayed error???
    ... This issue also may occur if the drivers for the modem and Network Adapter ... clean installation or upgrade installation? ... Does this issue occur in Windows Safe Mode with Networking? ... Restart the computer. ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Is it IE6 or my ISP? Page cannot be displayed error???
    ... I started having internet access problems on that date as well. ... >> This issue also may occur if the drivers for the modem and Network Adapter ... clean installation or upgrade installation? ... Does this issue occur in Windows Safe Mode with Networking? ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Installing, enabling, and configuring network adapter
    ... I think you'll need a 'real' nic, at least for the install. ... Les Connor [SBS Community Member] ... "Mark Schreiner" wrote in message ... > a peer-to-peer setup with a wireless network adapter. ...
    (microsoft.public.windows.server.sbs)
  • Re: Installing, enabling, and configuring network adapter
    ... I'd recommend you use the wired nic permanently for the SBS. ... >> I think you'll need a 'real' nic, at least for the install. ... >>> a peer-to-peer setup with a wireless network adapter. ...
    (microsoft.public.windows.server.sbs)

Loading