Re: companyweb - Sharepoint services

I know this is off topic, but wonder why do you say 'not host' public
website? We need to do this as we use database which will be used for
internal users, also to feed content to website, but information is
interelated.

Regards

"Costas" wrote:

Les,

I prefer if we keep it here in the group since I don't have that much free
time. Sometimes I need to clear my head and I just jump in here. Sorry
about that...

You wrote that there is no SQL instance under Services. Isn't there a
MSSQL$SBSMONITORING service running? That's the instance for the Monitoring
database. If there isn't, you have to go to the Control Panel, Windows
Small Business Server 2003 and reinstall the Monitoring component. Just
follow the wizard, then put the 'Server Tools' in Maintenance Mode and the
'Monitoring' in Reinstall.

After you complete this, see if Monitoring is working. The Best Practices
Analyzer shows the steps you need to take. Fix them one at a time. The
Companyweb issue leave it for the end. As far as the public site goes, it
isn't recommended to have a public facing site on the SBS server.


--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3178435E-5370-466E-A70A-F981EAF754B5@xxxxxxxxxxxxxxxx
Costas,

Do you have a direct email I can send you this server report to? Thier is
a
lot of info in thier and you might be able to spot anything quicker than
me.


"Costas" wrote:

Here is the link to it
http://www.microsoft.com/downloads/details.aspx?FamilyID=3874527a-de19-49bb-800f-352f3b6f2922&DisplayLang=en

What is the Millmaxnetwork.com site? Does it use the same IP address as
the
server and does it have a host header?

--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:92C2E96D-3DE9-4EAA-9A32-16D6FEEFF334@xxxxxxxxxxxxxxxx
Were is the BPA tool, is it part of the SBS setup ? I have checked the
ASP.net version runing and its 1.1

I have restarted the server and still not working.

The sites I have running are:

Default Web site
Millmaxnetwork.com
WSUS Administration
Sharepoint Central Administration
Microsoft Sharepoint Administration
Companyweb

Regards
Les




"Costas" wrote:

Another thing you might want to try is running SBS 2003 Best
Practices
Analyzer (BPA) and fix any issues the wizard comes up with

--
Costas


"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:uBkPFuu1IHA.2188@xxxxxxxxxxxxxxxxxxxxxxx
Before you do anything with SharePoint let's make sure you have the
Monitoring and Backup sites working.

In general, it isn't necessary to restart the server but it doesn't
hurt
to do it. Also make sure that the ASP.net version is set to 1.1 for
the
Default Web Site. If restarting the server doesn't solve the
problem,
post the names of the different sites you have there, so I can get
an
idea
of what is running under IIS

--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C9F49696-70A4-4D21-8107-38EE493D8F0E@xxxxxxxxxxxxxxxx
Ok, I have made those changes and nothing has happend. I stopped
the
Default
Web Site and re-started the service, again neither monitoring or
backup
are
pages are working, Do I need to re-start the server to fix this?
will
the
changes be immediate?

In relation to the companyweb, If I go through the steps again
re-installing
will this help? or will it simply cause more problems?

Thanks for your help with this

Les

"Costas" wrote:

There must be a misconfiguration on the IIS sites (which is
something
that I
see often here in the forums). Start by going to the IIS Manager,
Default
Web Sites, Properties, and see if the IP address is set to (All
Unassigned).
Then click the Advanced button and make sure that under 'Multiple
identities..." you have two entries. One for port 80 and host
header
the
name of the server, and one with IP address 127.0.0.1, at port 80
with
empty
host header.

That should fix the Backup and Monitoring issue.

For companyweb it's tough to tell what is going on because
following
the
document carefully is something that works and I'm not sure what
prevents
the reinstallation from succeeding.

--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6495764E-B9DE-49D3-BDD1-B741D9B26D48@xxxxxxxxxxxxxxxx
Hi Costas,

The error I get in IE is :

This program cannot display the webpage

Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.

What you can try:
Check your Internet connection. Try visiting another website
to
make
sure you are connected.

Retype the address.

Go back to the previous page.

More information

This problem can be caused by a variety of issues, including:

Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the
website's
domain.

This is on both Monitoring and Backup pages.

I am using .net version 1.1.4322. Also trying to connect via RWW
I
get
the
following error message:

The page cannot be found
The page you are looking for might have been removed, had its
name
changed,
or is temporarily unavailable.
--------------------------------------------------------------------------------

Please try the following:

Make sure that the Web site address displayed in the address bar
of
your
browser is spelled and formatted correctly.
If you reached this page by clicking a link, contact the Web
site
administrator to alert them that the link is incorrectly
formatted.
Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)

--------------------------------------------------------------------------------

Technical Information (for support personnel)

Go to Microsoft Product Support Services and perform a title
search
for
the
words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and
search
for
topics titled Web Site Setup, Common Administrative Tasks, and
About
Custom
Error Messages.

Many thanks for this

Regards
Les
"Costas" wrote:

What are the error messages you get in Internet Explorer? Also
make
sure
that the .NET version that is used in the Default Web Site
(and
the
Monitoring and Backup virtual directories) are 1.1 and not 2.0

--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:811B7947-2FEF-4339-8D80-C0F0CCFFAC84@xxxxxxxxxxxxxxxx
Iassume you mean the 'Default Website' is set to Unassigned?
which
it
is
and
companyweb is assigned to 192.168.16.2 also state is running
and
port
is
80

"Costas" wrote:

First let's try to make Monitoring and Backup operational.
In
IIS
Manager,
go to Properties and make sure that the IP address is set to
'All
Unassigned'. Then go to the Properties of companyweb and
check
to
see
if
the
IP address is set to the actual address of the server.

--
Costas


"LesG" <LesG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3DA24C16-ADA7-4F0E-B1D6-A69833C09B3F@xxxxxxxxxxxxxxxx
Hi Guys,

Update to the last posts, When re-installing components, I
got
some
errors,
when looking at the IIS websites, I had 3 companywebsite's
2
of
which
were
not running, I have deleted the two that were not running
and
now
get a
page
cannot be displayed error, also the reporting and
.