Re: Adding a second RAID set

Are you wanting 2-RAID1 arrays? If yes then yes you do need to have them on
seperate channels.


"John" <livingusman@xxxxxxxxxxxxxx> wrote in message
news:23df9a79-5f2e-4829-8fa5-cfc80635a90b@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi

Yes the drives are there in RAID configuration utility that is where
we made RAID1 out of the two new disks. We have a dual channel raid
controller but the two new disks that we have added on the front of
dell server also end up on channel 1 in RAID configuration utility
like the previous two disks. Do these need to be on seperate channels?

Thanks

Regards

On 18 Jun, 16:59, "AllenM" <nore...@xxxxxxxxxxx> wrote:
Have you booted into the RAID configuration utility and make sure you can
see the drives there? Are you using the DELL Disk Array Manager Console?
What do you see? Do you have a Dual Channel RAID Controller?

"John" <livingus...@xxxxxxxxxxxxxx> wrote in message

news:19bfcab1-0909-442e-8fdb-7cc62d2f89e1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx



Hi

Our Dell Perc 4/Di had two disks in a RAID 1 configuration. Now we
have added two more disks and have made another RAID1 out of these
two. In Perc configuration old and new raid sets appear as two logical
drives. However when I reboot the server it says 0 logical disks
found. The only way for me is to take out the two new disks and reboot
and then the original logical disk appears and I can boot into
windows. What am I doing wrong and what is the correct way to add
another pair of disks in a RAID1 while there is another pair already
in RAID1 on Perc 4 /Di?

Many Thanks

Regards- Hide quoted text -

- Show quoted text -



.

Relevant Pages

  • Re: Configuring Disks for Exchange 2003
    ... 50MB but there are enough with 1GB+ mailboxes. ... Wouldn't I need to worry about IOPs with only 2 disks per storage group? ... drives and I'm wondering how best to approach dividing the disks. ... Dual channel U320 RAID controller with battery backed cache etc. ...
    (microsoft.public.exchange.setup)
  • Re: Configuring Disks for Exchange 2003
    ... Wouldn't I need to worry about IOPs with only 2 disks per storage group? ... drives and I'm wondering how best to approach dividing the disks. ... Dual channel U320 RAID controller with battery backed cache etc. ... Use one Store per SG until you max out each of the three stores at 40 ...
    (microsoft.public.exchange.setup)
  • Re: Configuring Disks for Exchange 2003
    ... drives and I'm wondering how best to approach dividing the disks. ... Dual channel U320 RAID controller with battery backed cache etc. ... Use one Store per SG until you max out each of the three stores at 40 ...
    (microsoft.public.exchange.setup)
  • Re: Adding a second RAID set
    ... The drives are probably going into a backpanel 'frame' that will only allow ... In general the idea of putting the 2nd array on the 2nd channel is desirable ... Yes we need two sepearte RAID1 arrays. ... we made RAID1 out of the two new disks. ...
    (microsoft.public.windows.server.sbs)
  • Promise and sparc64
    ... The system boots and the kernel works, the two UDMA100 disks plugged ... When i enable DMA on the other channel i start ...
    (Linux-Kernel)