Re: Adding a second RAID set
- From: John <livingusman@xxxxxxxxxxxxxx>
- Date: Wed, 18 Jun 2008 09:30:44 -0700 (PDT)
Hi
Yes the drives are there in RAID configuration utility that is where
we made RAID1 out of the two new disks. We have a dual channel raid
controller but the two new disks that we have added on the front of
dell server also end up on channel 1 in RAID configuration utility
like the previous two disks. Do these need to be on seperate channels?
Thanks
Regards
On 18 Jun, 16:59, "AllenM" <nore...@xxxxxxxxxxx> wrote:
Have you booted into the RAID configuration utility and make sure you can
see the drives there? Are you using the DELL Disk Array Manager Console?
What do you see? Do you have a Dual Channel RAID Controller?
"John" <livingus...@xxxxxxxxxxxxxx> wrote in message
news:19bfcab1-0909-442e-8fdb-7cc62d2f89e1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi
Our Dell Perc 4/Di had two disks in a RAID 1 configuration. Now we
have added two more disks and have made another RAID1 out of these
two. In Perc configuration old and new raid sets appear as two logical
drives. However when I reboot the server it says 0 logical disks
found. The only way for me is to take out the two new disks and reboot
and then the original logical disk appears and I can boot into
windows. What am I doing wrong and what is the correct way to add
another pair of disks in a RAID1 while there is another pair already
in RAID1 on Perc 4 /Di?
Many Thanks
Regards- Hide quoted text -
- Show quoted text -
.
- Follow-Ups:
- Re: Adding a second RAID set
- From: AllenM
- Re: Adding a second RAID set
- References:
- Adding a second RAID set
- From: John
- Re: Adding a second RAID set
- From: AllenM
- Adding a second RAID set
- Prev by Date: Re: Loosing Internet Connection
- Next by Date: Re: SBS limitation
- Previous by thread: Re: Adding a second RAID set
- Next by thread: Re: Adding a second RAID set
- Index(es):
Relevant Pages
|
