RE: Problems with Permissions

Hello Wayne,

Considering the issue had been resolved, for the purpose to help other
people to get help from our experience, I would like to make a summary here.

Problem Description: You cannot create network share place from SBS server
to XP client even you had delegate full control permission to the share
folder.

Cause: Network topology is not configured correctly

Resolution: Adjust the network topology as below:

a. 1 RJ45 Cable from the Modem to the external NIC of SBS server. Configure
the SBS's external NIC to use the static IP address which you got from ISP.
b. Enable DHCP and DNS service on SBS server. Adjust the DHCP settings that
set SBS server's internal IP address as client's DNS and default gateway.
c. 1 RJ45 Cables from the SBS server internal NIC connect to Linksys
Router's regular port and configure the internet port a internal IP
d. 1 RJ45 Cable from the Linksys Router to 1 XP Pro Box
e. Disable DHCP function on Linksys Router.
f. Run the Configure Email and Internet Connection Wizard on SBS server.

You can refer to the following article for more details:

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/kb/825763/en-us

Two network adapters - direct connection to broadband
a. On the Connection Type page, click Broadband, and then click Next.
b. On the Broadband Connection page, under My server uses a direct
broadband connection, click Next.
c. If your network connection to the Internet is disabled, you will
receive the Network Connection, You must enable and configure the network
connection to your ISP page. If you do not receive this page, go to step e.
On this page, under Connection name, click Network Connection.

d. Configure IP settings according to the requirements of your ISP, and
then click Next. (The network connection is now enabled.)
e. On the Network Connection, You must click the connection for your ISP
and local network page, under ISP network connection, click Network
Connection.
f. Under Local network connection, click Server Local Area Connection, and
then click Next.
g. On the Direct Broadband Connection page, next to Preferred DNS server
and Alternate DNS server, type the IP addresses that are provided by your
ISP. To change the Default gateway setting, type the default gateway IP
address if the IP address is not provided by DHCP. Click Next.
h. Complete the Configure E-mail and Internet Connection Wizard.

Thanks again for your patience and understanding. Also, if there any
further concern, please do not hesitate to let me know.

Have a nice day.


Best regards,

Gary Wang(MSFT)
Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| X-Tomcat-ID: 94198333
| References: <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
<Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
<F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
<mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
<tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
<i9K6UQ0tIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
<ji6oiOmuIHA.1788@xxxxxxxxxxxxxxxxxxxxxx>
<OY6$IjyuIHA.5240@xxxxxxxxxxxxxxxxxxxxxx>
<K2Ypy5KvIHA.4088@xxxxxxxxxxxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain
| Content-Transfer-Encoding: 7bit
| From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| Organization: Microsoft
| Date: Fri, 23 May 2008 10:11:04 GMT
| Subject: RE: Problems with Permissions
| X-Tomcat-NG: microsoft.public.windows.server.sbs
| Message-ID: <1uh2T1LvIHA.5240@xxxxxxxxxxxxxxxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.sbs
| Lines: 1720
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:109006
| NNTP-Posting-Host: tk5tomimport1.phx.gbl 10.201.218.19
|
| Hi Wayne,
|
| I am really happy to hear that you resolved the issue. It is a nice
| experience that work with you on this issue. You great efforts and
detailed
| information is very helpful for us to narrow down the root cause and
| accelerated our troubleshooting. Thank you for your time and patience.
|
| It appears that you are dealing with multiple issues that will require
| individual attention to ensure that we are not counter-productive in our
| support efforts. A suggestion in this case would be to post these issues
| separately so that contributors within this newsgroup who specialize in
| certain feature will be able to provide the 'value add' to resolving
these
| issues.
|
| It is important to us that we provide you with the best support possible
| and by breaking down these issues separately we will be able to address
| them appropriately and in a timely manner.
|
| However, personally, I would like to share some experience here. Your
| thought is right, ISA is performing as a web proxy server in this
scenario.
| In fact, we recommend that you to install Firewall Client on each client
| computer in order to access the Internet. To install Firewall Client, it
is
| recommended that you create a shared folder for the Firewall Client
| installation files, and then follow the instructions as below to use the
| Set Up Client Applications Wizard to deploy Firewall Client to each
client
| computer. To add Firewall Client for deployment to client computers:
|
| 1. Click Start, and then click Server Management.
|
| 2. In the console tree, double-click Client Computers, and then in the
| details pane, click Set Up Client Applications.
|
| 3. On the Available applications page, click Add. The Application
| Information dialog box appears.
|
| 4. In the Application Name box, type Firewall Client, and then in the
| Location of setup executable for this application box, type
| \\ServerName\Mspclnt\Setup.exe /v"SERVER_NAME_OR_IP=ServerName
| ENABLE_AUTO_DETECT=0 REFRESH_WEB_PROXY=1 /qn" where ServerName is the
name
| of your server. There are no spaces within the command except before /v,
| ENABLE, REFRESH, and /qn.
|
| 5. Follow the instructions to complete the wizard.
|
| 6. When prompted to assign the new application to client computers, click
| Yes. The Assign Applications Wizard appears.
|
| 7. Follow the instructions to complete the wizard.
|
| Note: The Set Up Client Applications Wizard only works with client
| computers running Microsoft Windows 2000 Professional or Microsoft
Windows
| XP Professional. If you have a client computer running a different
| operating system, you must manually connect to the shared folder from the
| client computer. From the client computer, click Start, click Run, and
then
| type \\ServerName\Mspclnt\Setup.exe, where ServerName is the name of your
| server.
|
| 8. To check the name of your server, click Start, right-click My
Computer,
| and then click Properties. The computer name is the first label before
the
| period listed in the Full computer name, for example,
| ServerName.smallbusiness.local.
|
| And about the issue that cannot connect to router's administrator
website,
| I would like to suggest that you try the following:
|
| 1.Contact Linksys technical support to check whether there are special
| configure should be set on their device in this scenario .
|
| 2. Configure the client IE to use proxy server manually and add the
| intranet websites as exceptions in IE connection settings. To do this,
|
| a. On the client, open Control Panel-->Internet Options.
| b. On the Connections tab, click LAN Settings.
| c. Configure the setting as the following screenshot:
| d. Click Advanced. Add the server's IP, FQDN and the URL to the
Exceptions
| list. Use semicolons (;) to separate entries.
| e. Click OK twice to save the changes.
|
| 3. It may occurs if you set two default gateway on SBS server. Please
refer
| to the following KB article:
|
| Only One Default Gateway Allowed on Proxy Server
| http://support.microsoft.com/kb/161380
|
| If the problem still persists, please help to collect the following
| information for further analysis:
| 1. Check can you ping the router's IP from client.
| 2. Check whether the router's IP is correct and listed under DHCP
server's
| address pool.
| 3. Run the command: tracert 192.168.71.1 > c:\tracertlog.txt, and send
the
| log to me.
| 4. Check event viewer for related information, if there are any, please
| help save it to *.evt and send to me.
| 5. Run command "ipconfig /all > c:\ipconfig_sbs.txt" and "route print >
| c:\route_sbs.txt" on SBS, send the files c:\ipconfig_sbs.txt and
| c:\route_sbs.txt to me.
| 6. Run command "ipconfig /all > c:\ipconfig_client.txt" and "route print

| c:\route_client.txt" on problematic client, send the files
| c:\ipconfig_client.txt and c:\route_client.txt to me.
|
| For Windows Live install issue, please try that clean up your previous
| windows live installation from Add/remove. Also, you may like to try
| install it more times because it may due to server is busy. And you can
| contact https://support.live.com/ for support.
|
| Hope it helps and have a nice day:.
|
| Best regards,
|
| Gary Wang(MSFT)
| Microsoft CSS Online Newsgroup Support
|
| Get Secure! - www.microsoft.com/security
|
| =====================================================
| This newsgroup only focuses on SBS technical issues. If you have issues
| regarding other Microsoft products, you'd better post in the
corresponding
| newsgroups so that they can be resolved in an efficient and timely
manner.
| You can locate the newsgroup here:
| http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
|
| When opening a new thread via the web interface, we recommend you check
the
| "Notify me of replies" box to receive e-mail notifications when there are
| any updates in your thread. When responding to posts via your newsreader,
| please "Reply to Group" so that others may learn and benefit from your
| issue.
|
| Microsoft engineers can only focus on one issue per thread. Although we
| provide other information for your reference, we recommend you post
| different incidents in different threads to keep the thread clean. In
doing
| so, it will ensure your issues are resolved in a timely manner.
|
| For urgent issues, you may want to contact Microsoft CSS directly. Please
| check http://support.microsoft.com for regional support phone numbers.
|
| Any input or comments in this thread are highly appreciated.
| =====================================================
|
| This posting is provided "AS IS" with no warranties, and confers no
rights.
|
| --------------------
| | X-Tomcat-ID: 71490109
| | References: <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| <tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
| <i9K6UQ0tIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| <ji6oiOmuIHA.1788@xxxxxxxxxxxxxxxxxxxxxx>
| <OY6$IjyuIHA.5240@xxxxxxxxxxxxxxxxxxxxxx>
| | MIME-Version: 1.0
| | Content-Type: text/plain
| | Content-Transfer-Encoding: 7bit
| | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | Organization: Microsoft
| | Date: Fri, 23 May 2008 08:24:23 GMT
| | Subject: RE: Problems with Permissions
| | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | Message-ID: <K2Ypy5KvIHA.4088@xxxxxxxxxxxxxxxxxxxxxx>
| | Newsgroups: microsoft.public.windows.server.sbs
| | Lines: 1443
| | Path: TK2MSFTNGHUB02.phx.gbl
| | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:108995
| | NNTP-Posting-Host: TOMCATIMPORT3 10.201.220.210
| |
| | From: Wayne Smith [mailto:waynesmith1971@xxxxxxxxxxx]
| | Sent: Friday, May 23, 2008 1:05 PM
| | To: Guo-Zhen Wang (Gems Lab)
| | Subject: Re: Follow Up For Microsoft SBS Public Newsgroup Post
[Problems
| | with Permissions] with Gary Wang (94820911)
| |
| | Hello Gary,
| |
| | Finally you will be pleased to hear that I now have almost everything
set
| | up and working properly. It was a very simple configuration problem
that
| | resolved everything - originally the RJ45 network cable that went from
| the
| | server to the router was plugged into the 'Internet' port on the
router,
| | but I changed this to one of the regular network ports on the router
and
| | ran the Internet and Email configuration wizard again, and it solved
the
| | problems immediately. I don't know why it wouldn't work when plugged
into
| | the 'Internet' port as you would imagine that was the correct way to
| | configure it, but for whatever reason that's where the problems
| originated
| | from and I now have almost everything working as I would expect now.
| |
| | There are still a few small issues that I cannot resolve at the moment,
| but
| | I think these are minor problems that I will be able to fix over the
| course
| | of the next few days with the help of the newsgroups.
| |
| | I'm not sure why but I can't currently access the router's web
interface
| on
| | either the server or the Windows XP Professional machine, previously it
| was
| | simply a case of entering the router's static IP address into my web
| | browser (http://192.168.71.1/) but when I do this from either the
server
| or
| | XP machine, I receive the following web page error message:
| |
| |
|
----------------------------------------------------------------------------
| | ------
| | Network Access Message: The page cannot be displayed
| |
| | Explanation: The request timed out before the page could be retrieved.
| |
| | Try the following:
| | " Refresh page: Search for the page again by clicking the Refresh
button.
| | The timeout may have occurred due to Internet congestion.
| | " Check spelling: Check that you typed the Web page address correctly.
| The
| | address may have been mistyped.
| | " Contact website: You may want to contact the website administrator to
| | make sure the Web page still exists. You can do this by using the
e-mail
| | address or phone number listed on the website home page.
| | If you are still not able to view the requested page, try contacting
your
| | administrator or Helpdesk.
| |
| | Technical Information (for support personnel)
| | " Error Code 10060: Connection timeout
| | " Background: The gateway could not receive a timely response from the
| | website you are trying to access. This might indicate that the network
is
| | congested, or that the website is experiencing technical difficulties.
| | " Date: 23/05/2008 04:30:06
| | " Server: server.e-techsupport.local
| | " Source: Firewall
| |
|
----------------------------------------------------------------------------
| | ------
| |
| | I do have ISA Server 2004 installed on the server machine and although
I
| | have looked at this piece of software in some detail, I haven't made
any
| | configuration changes to it yet simply because I am very unfamiliar
with
| | ISA Server and I don't yet feel confident enough to make changes to the
| | configuration - when I ran the Internet and Email Setup on the server,
| all
| | of the configuration changes were made automatically to ISA Server and
my
| | instinct tells me this may be where the problem lies with not being
able
| to
| | access the routers configuration page at the moment.
| |
| | Initially I did experience a similar problem on the XP machine with not
| | being able to access some web pages, but I solved this by opening IE,
| | selecting Tools > Internet Options, selecting the 'Connections' tab >
LAN
| | Settings
| |
| | From this Window I placed a tick in the box 'Use a proxy server for
your
| | LAN' and 'Bypass proxy server for local addresses', in the Address box
I
| | typed 'server' and in the Port box I typed '8080' - that then gave me
| full
| | Internet access from the Windows XP machine. I did the same on the
server
| | and although I can access the Internet on both machines just fine, I am
| | still unable to access the routers configuration web page.
| |
| | I may be wrong but I believed that ISA Server was also a Proxy Server
and
| | when you access the Internet with ISA installed, you would access it
| | through the Proxy server and as such mask your ISP Static IP Address,
but
| | when I navigate to www.whatismyip.com it still shows my current ISP
| Static
| | IP - as I said I have very little experience with ISA so I am sure it
is
| | simply a case of me not configuring something properly, but I will
spend
| a
| | few days reading the help files and Microsoft's Technet Support web
pages
| | to see if I can figure these problems out for myself.
| |
| | The only other problem that I am currently aware of is on the Windows
XP
| | machine; I can download and install software with no problems at all,
but
| | everytime I try to install any of the Windows Live services I seem to
| have
| | a problem. If I navigate to www.windowslive.com and run the
installation
| | for 'Windows Live Messenger', 'Windows Live Mail', 'Windows Live Photo
| | Gallary' etc, the installation displays a red cross next to all of
these
| | programs with an error message saying 'Sorry, we couldn't install these
| | programs'. As I mentioned before, I can install any software on the XP
| | machine without a problem but the Windows Live Services simply will not
| | install and I have no idea why - would there be a reason for this? or
| | perhaps the problem is at Microsoft's end?
| |
| | Anyway, I'm not too concerned about these small issues for the moment
...
| | my main problem has now been fixed and in no small part that came about
| | through your help and for that I am very grateful. If you think you may
| | know how to resolve the other small problems I've mentioned in this
| email,
| | I would certainly be very grateful to hear from you again, but for the
| | moment you can consider this problem solved.
| |
| | Thanks again for your patience and determination to help me, I genuinly
| | would not have been able to do it without your help.
| |
| | Kind Regards,
| | Wayne
| |
| | --------------------
| | | X-Tomcat-ID: 89659963
| | | References: <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | <tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
| | <i9K6UQ0tIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | <ji6oiOmuIHA.1788@xxxxxxxxxxxxxxxxxxxxxx>
| | | MIME-Version: 1.0
| | | Content-Type: text/plain
| | | Content-Transfer-Encoding: 7bit
| | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | Organization: Microsoft
| | | Date: Wed, 21 May 2008 09:55:07 GMT
| | | Subject: RE: Problems with Permissions
| | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | Message-ID: <OY6$IjyuIHA.5240@xxxxxxxxxxxxxxxxxxxxxx>
| | | Newsgroups: microsoft.public.windows.server.sbs
| | | Lines: 1194
| | | Path: TK2MSFTNGHUB02.phx.gbl
| | | Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.sbs:108647
| | | NNTP-Posting-Host: tk5tomimport2.phx.gbl 10.201.218.20
| | |
| | | Hi Wayne,
| | |
| | | Thanks for your update and efforts.
| | |
| | | For the "Network Configuration Wizard" not accessible issue, please
| check
| | | the following:
| | |
| | | 1. Open IIS, navigate to Web Sites\ConnectComputer, right click it
| and
| | | choose Properties.
| | | 2. Click on Directory Security tab, then click Edit under the
| | | "Authentication and access control" option, make sure the checkbox of
| | | "Enable anonymous access" is checked.
| | | 3. Click on the Edit under "IP address and domain name
restriction",
| | make
| | | sure you have granted proper permission to the current IP you are
using.
| | | 4. Add the http://server.e-techsupport.local/ to your IE's trust
| site.
| | To
| | | add a website to the trusted zone list in Internet Explorer. Please
| | follow
| | | the steps below:
| | |
| | | a. Click the Start Button, type inetcpl.cpl in the Start Run box, and
| | then
| | | press Enter.
| | | b. On the Security tab, click "Trusted sites" and then click "Default
| | | Level".
| | | c. Click Sites, type the URL of the site
| | | <http://server.e-techsupport.local/> in the "Add this Web site to the
| | zone"
| | | box, uncheck the "Require server verification" option .
| | |
| | | 5. Check whether it can be access again.
| | |
| | | The DHCP not working properly issue may due to DNS not correctly
| | | configured. Please check the following:
| | |
| | | 1. Run the command: ipconfig /all on SBS server, make sure both
| internal
| | | NIC and external NIC are using the internal NIC's IP as DNS server.
| | | 2. Open Start\Administrative Tools\DNS.
| | | 3. Make sure your server's FQDN have correct DNS records.
| | | 4. Right click on the server's name, choose Properties, then
navigate
| to
| | | Forwarders tab, make sure the two ISP's DNS server IP is listed there.
| | | 5. If possible, change the Linksys wireless router to another switch
| as
| | a
| | | test.
| | | 6. Re-run CEICW carefully following my previous reply again.
| | |
| | | About the wireless router, I think Linksys's suggest may right
because
| | they
| | | should be better understanding their product. Also, please double
| confirm
| | | with them that your configuration and the topology are correct.
| | |
| | | If the problems still persists, please check event viewer for related
| | | information, if there are any, please help save it to *.evt and send
to
| | me.
| | |
| | | Hope it helps.
| | |
| | | Best regards,
| | |
| | | Gary Wang(MSFT)
| | | Microsoft CSS Online Newsgroup Support
| | |
| | | =====================================================
| | |
| | | This posting is provided "AS IS" with no warranties, and confers no
| | rights.
| | |
| | | --------------------
| | | | X-Tomcat-ID: 103602746
| | | | References: <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | <tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
| | | <i9K6UQ0tIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | | MIME-Version: 1.0
| | | | Content-Type: text/plain
| | | | Content-Transfer-Encoding: 7bit
| | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | Organization: Microsoft
| | | | Date: Tue, 20 May 2008 10:23:52 GMT
| | | | Subject: RE: Problems with Permissions
| | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | Message-ID: <ji6oiOmuIHA.1788@xxxxxxxxxxxxxxxxxxxxxx>
| | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | Lines: 1049
| | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | Xref: TK2MSFTNGHUB02.phx.gbl
| microsoft.public.windows.server.sbs:108476
| | | | NNTP-Posting-Host: TOMCATIMPORT3 10.201.220.210
| | | |
| | | | From: Wayne Smith [mailto:waynesmith1971@xxxxxxxxxxx]
| | | | Sent: Tuesday, May 20, 2008 6:18 PM
| | | | To: Guo-Zhen Wang (Gems Lab)
| | | | Subject: Re: Follow Up For Microsoft SBS Public Newsgroup Post
| | [Problems
| | | | with Permissions] with Gary Wang (94820911)
| | | |
| | | | Hello again Gary,
| | | |
| | | | Since I last exchanged email messages with you, I have made some
| | progress
| | | | but I'm still experiencing a few problems. I'll try to explain what
| | I've
| | | | done and the progress I have made so far, and I will also outline
the
| | | | issues that I am still experiencing.
| | | |
| | | | In my last email to you I indicated that I was in the process of
| | | | reinstalling Windows Small Business Server 2003 - this has now been
| | | | completed and I followed the instructions to the letter in order to
| | | | configure the server for Internet access. The good news is I now
have
| | | | Internet and some Network access on the server, which is certainly
an
| | | | improvement on my previous configurations. At the moment I can
access
| | the
| | | | Internet just fine, and I can also open up the internal SBS 2003
home
| | | page
| | | | by navigating to: http://server.e-techsupport.local/ but I am still
| | | | experiencing one or two problems when I try to navigate further
using
| | the
| | | | links on this Internal website.
| | | |
| | | | If I click the first link 'My Company's Internal Website', the page
| | loads
| | | | without any problems, if I click the second link 'Network
| Configuration
| | | | Link' I receive a 'The page cannot be displayed' error message, at
| the
| | | | bottom of the page it says 'Error Code: 403 Forbidden. The server
| | denied
| | | | the specified Uniform Resource Locator (URL). Contact the server
| | | | administrator. (12202).
| | | |
| | | | If I click the third link on the SBS home page 'Remote Web
Workplace'
| | | | initially I receive the following error message: There is a problem
| | with
| | | | this website's security certificate' the options available to me
from
| | | this
| | | | page are: 1) Click here to close this webpage. 2) Continue to this
| | | webpage
| | | | (not recommended) or 3) More information. If I select option 2)
| | Continue
| | | to
| | | | this website (not recommended), the page does display but with the
| | | | following errors: The URL box at the top of the browser displays
the
| | | | website URL but coloured in red and next to the URL is another red
| box
| | | | which says 'Certificate error'. Also at the very top of the webpage
I
| | | have
| | | | an error message where I often see messages asking me to install
| Active
| | X
| | | | controls, but this message reads: 'To help protect your security,
| | | Internet
| | | | Explorer has blocked this website from displaying content with
| security
| | | | certificate errors. Click here for options'. If I click the red box
| | next
| | | to
| | | | the URL which says 'Certificate error', and then select 'View
| | | Certificates'
| | | | and 'Install Certificates', then follow the wizard to install the
| | | | certificate, I receive a message that says the 'Import was
| successful'.
| | | | Click OK, navigate to the home page again:
| | | | http://server.e-techsupport.local/ and select 'Remote Web
Workplace',
| | the
| | | | page displays without any certificate errors - which is what I
would
| | | | expect, but often this certificate error message will reappear
later
| | when
| | | I
| | | | navigate to that link again, or if I reboot the server - sometimes
by
| | | | installing the certificate it will resolve the problem but this
seems
| | to
| | | be
| | | | only temporary.
| | | |
| | | | Also I seem to have a problem with DHCP on the server, by
navigating
| to
| | | | 'Control Panel' > 'Administrative Tools' > and clicking the DHCP
| icon,
| | | when
| | | | DHCP opens, it lists the DHCP server but says it's 'Not connected',
| | | however
| | | | when I click on this server within the DHCP control panel, the DHCP
| | | server
| | | | starts without any further interaction, and it appears to continue
| | | running
| | | | for as long as I have the DHCP window open but the moment I close
it,
| | and
| | | | reopen it again, it says 'Not Connected'. When I navigate to
'Control
| | | | Panel' > 'Administrative Tools' > 'Services' and check the status
for
| | | 'DHCP
| | | | Client' and 'DHCP Server' both are listed as 'Started' with Startup
| | Type
| | | | set to 'Automatic' but even when I right-click these services and
| | select
| | | | Restart, it makes no difference - the DHCP window has to be open
| before
| | | the
| | | | service will run.
| | | |
| | | | I believe this issue with the DHCP server is also responsible for
the
| | | lack
| | | | of connectivity I have from the Windows XP machine also, as I am
| unable
| | | to
| | | | join that machine to the SBS 2003 domain. I have created a User
| Account
| | | and
| | | | Computer using the Server Management Console but when I Enable the
| | | Network
| | | | Connection on the XP machine, it takes a while to obtain an IP
| address,
| | | but
| | | | when it does it shows 'Limited or No Connectivity' with a yellow
| symbol
| | | | covering the network icon in the taskbar. I have also tried to
| connect
| | | | Wirelessly from the XP machine but again I receive exactly the same
| | error.
| | | |
| | | | I feel sure that the problem I have with DHCP on the server is
| causing
| | | this
| | | | problem but I really have no idea how to fix it. I have already
| | | uninstalled
| | | | DHCP and reinstalled it but that made no difference, and I have
also
| | | | disabled DHCP within the Linksys Router, so I am sure there is no
| | | conflict
| | | | there.
| | | |
| | | | One other point that I should mention, and I'm not sure if this
| matters
| | | but
| | | | in your previous response you gave a list of instructions for me to
| | carry
| | | | out, and one of those was to configure the Router as a Wireless
| Access
| | | | Point. I did check through all of the menu options on the Router's
| | | webpage
| | | | but I was unable to find anything relating to setting the Router as
a
| | | | Wireless Access Point. so I went to Linksys website and spoke
online
| to
| | | one
| | | | of their support technicians, I explained that a Microsoft
Technician
| | has
| | | | asked me to configure the Router as a Wireless Access Point but he
| told
| | | me
| | | | this was not necessary to do as it would only allow one XP machine
to
| | | | connect to the server, and his advice was to leave it set up as a
| | Router,
| | | | which I have done. If you believe this advice was wrong, can you
| kindly
| | | | explain why so I can go back to Linksys and try to get further
| | assistance
| | | | with this configuration.
| | | |
| | | | Again, I sincerely appologise for the very long email message but I
| did
| | | | want to explain everything that was happening in the hope it would
| give
| | | you
| | | | a better understanding of where the problems might be originating
| from.
| | | If
| | | | you can see something that perhaps I have overlooked, I would of
| course
| | | be
| | | | incredibly appreciative and grateful.
| | | |
| | | | With Very Kind Regards,
| | | | Wayne Smith
| | | |
| | | |
| | | | --------------------
| | | | | X-Tomcat-ID: 84662838
| | | | | References: <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | | <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | | <tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | MIME-Version: 1.0
| | | | | Content-Type: text/plain
| | | | | Content-Transfer-Encoding: 7bit
| | | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | | Organization: Microsoft
| | | | | Date: Fri, 16 May 2008 09:49:30 GMT
| | | | | Subject: RE: Problems with Permissions
| | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | Message-ID: <i9K6UQ0tIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | Lines: 820
| | | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | | Xref: TK2MSFTNGHUB02.phx.gbl
| | microsoft.public.windows.server.sbs:108011
| | | | | NNTP-Posting-Host: tk5tomimport2.phx.gbl 10.201.218.20
| | | | |
| | | | | Hello Wayne,
| | | | |
| | | | | Thanks for your updates.
| | | | |
| | | | | I will keep on monitoring this issue. If there any further
| assistance
| | | is
| | | | | needed, please feel free to let me know. I will happy to afford
| help.
| | | | |
| | | | | Have a nice day :-)
| | | | |
| | | | | Best regards,
| | | | |
| | | | | Gary Wang(MSFT)
| | | | |
| | | | | Microsoft CSS Online Newsgroup Support
| | | | |
| | | | | Get Secure! - www.microsoft.com/security
| | | | |
| | | | | =====================================================
| | | | | This newsgroup only focuses on SBS technical issues. If you have
| | issues
| | | | | regarding other Microsoft products, you'd better post in the
| | | | corresponding
| | | | | newsgroups so that they can be resolved in an efficient and
timely
| | | | manner.
| | | | | You can locate the newsgroup here:
| | | | | http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| | | | |
| | | | | When opening a new thread via the web interface, we recommend you
| | check
| | | | the
| | | | | "Notify me of replies" box to receive e-mail notifications when
| there
| | | are
| | | | | any updates in your thread. When responding to posts via your
| | | newsreader,
| | | | | please "Reply to Group" so that others may learn and benefit from
| | your
| | | | | issue.
| | | | |
| | | | | Microsoft engineers can only focus on one issue per thread.
| Although
| | we
| | | | | provide other information for your reference, we recommend you
post
| | | | | different incidents in different threads to keep the thread
clean.
| In
| | | | doing
| | | | | so, it will ensure your issues are resolved in a timely manner.
| | | | |
| | | | | For urgent issues, you may want to contact Microsoft CSS
directly.
| | | Please
| | | | | check http://support.microsoft.com for regional support phone
| numbers.
| | | | |
| | | | | Any input or comments in this thread are highly appreciated.
| | | | | =====================================================
| | | | |
| | | | | This posting is provided "AS IS" with no warranties, and confers
no
| | | | rights.
| | | | |
| | | | | --------------------
| | | | | | X-Tomcat-ID: 77847094
| | | | | | References:
<A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | | | <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | MIME-Version: 1.0
| | | | | | Content-Type: text/plain
| | | | | | Content-Transfer-Encoding: 7bit
| | | | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | | | Organization: Microsoft
| | | | | | Date: Fri, 16 May 2008 09:22:12 GMT
| | | | | | Subject: RE: Problems with Permissions
| | | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | | Message-ID: <tJYwcZztIHA.5848@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | | Lines: 716
| | | | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | | | Xref: TK2MSFTNGHUB02.phx.gbl
| | | microsoft.public.windows.server.sbs:108006
| | | | | | NNTP-Posting-Host: TOMCATIMPORT3 10.201.220.210
| | | | | |
| | | | | | From: Wayne Smith [mailto:waynesmith1971@xxxxxxxxxxx]
| | | | | | Sent: Friday, May 16, 2008 5:11 PM
| | | | | | To: Guo-Zhen Wang (Gems Lab)
| | | | | | Subject: Re: Follow Up For Microsoft SBS Public Newsgroup Post
| | | | [Problems
| | | | | | with Permissions] with Gary Wang (94820911)
| | | | | |
| | | | | | Hello Gary,
| | | | | | My apologies for the delay in responding to your last post. I
| | | followed
| | | | | your
| | | | | | instructions to the letter but still I had problems and I
wasn't
| | | | entirely
| | | | | | sure why. I'm now in the process of reinstalling SBS 2003 just
to
| | see
| | | | if
| | | | | | that makes any difference to the outcome - at the moment I
appear
| | to
| | | be
| | | | | | having problems with my broadband connection on the server, but
| if
| | I
| | | | plug
| | | | | | that RJ45 cable into a desktop XP computer, my broadband works
| fine
| | -
| | | | so
| | | | | I
| | | | | | wonder if perhaps I have a problem with one or more of the
| network
| | | | cards
| | | | | in
| | | | | | the server.
| | | | | |
| | | | | | Anyway, I doubt this issue can be resolved straight away so I
| will
| | | | spend
| | | | | a
| | | | | | few more days trying to solve everything on the server first
and
| | will
| | | | | send
| | | | | | you a reply sometime next week just to keep you updated and let
| you
| | | | know
| | | | | | how I have got on.
| | | | | |
| | | | | | Thanks again for your very kind help and assistance, it really
is
| | | | | | appreciated.
| | | | | |
| | | | | | Kind Regards,
| | | | | | Wayne
| | | | | | --------------------
| | | | | | | X-Tomcat-ID: 88119859
| | | | | | | References:
| <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | | | | <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | <F5S26JOtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | | MIME-Version: 1.0
| | | | | | | Content-Type: text/plain
| | | | | | | Content-Transfer-Encoding: 7bit
| | | | | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | | | | Organization: Microsoft
| | | | | | | Date: Tue, 13 May 2008 10:21:09 GMT
| | | | | | | Subject: RE: Problems with Permissions
| | | | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | | | Message-ID: <mCz3uQOtIHA.4284@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | | | Lines: 633
| | | | | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | | | | Xref: TK2MSFTNGHUB02.phx.gbl
| | | | microsoft.public.windows.server.sbs:107391
| | | | | | | NNTP-Posting-Host: TOMCATIMPORT3 10.201.220.210
| | | | | | |
| | | | | | | Hello Wayne,
| | | | | | |
| | | | | | | Thanks for your detailed information. It is really helpful
for
| us
| | | to
| | | | | | | understanding the scenario clearly.
| | | | | | |
| | | | | | | According to your description, I think the issue most
properly
| | due
| | | to
| | | | | not
| | | | | | | connection those device in right order. In your current
| settings,
| | | the
| | | | | | | Linksys router is actually acting as a router. And SBS server
| is
| | | only
| | | | | | take
| | | | | | | the role of an internal server. Even though the SBS server
had
| 2
| | | NICs
| | | | | but
| | | | | | | they are all configured to connected to internal network.
The
| | | issue
| | | | | that
| | | | | | | SBS cannot exchange files with XP client may due to that the
| | | routing
| | | | | | table
| | | | | | | is not correct, so that the SBS server could not know how to
| | treat
| | | | with
| | | | | | | internal traffic request.
| | | | | | |
| | | | | | | Based on my experience and according to your requirement, I
| would
| | | | | | recommend
| | | | | | | that you adjust the network topology as below:
| | | | | | |
| | | | | | | a. 1 RJ45 Cable from the Modem to the external NIC of SBS
| server.
| | | | | | Configure
| | | | | | | the SBS's external NIC to use the static IP address which you
| got
| | | | from
| | | | | | ISP.
| | | | | | | b. Enable DHCP and DNS service on SBS server. Adjust the DHCP
| | | | settings
| | | | | | that
| | | | | | | set SBS server's internal IP address as client's DNS and
| default
| | | | | gateway.
| | | | | | | c. 1 RJ45 Cables from the SBS server internal NIC connect to
| | | Linksys
| | | | | | | Router's internet port and configure the internet port a
| internal
| | | IP
| | | | | | | d. 1 RJ45 Cable from the Linksys Router to 1 XP Pro Box
| | | | | | | e. Disable DHCP function on Linksys Router.
| | | | | | | f. Configure the Linksys Router to work as a wireless Access
| | Point
| | | | | | instead
| | | | | | | of a router (You may need to contact Linksys support for
| related
| | | | | | | information)
| | | | | | | g. Run the Configure Email and Internet Connection Wizard on
| SBS
| | | | | server.
| | | | | | | You can refer to the following article for more details:
| | | | | | |
| | | | | | | How to configure Internet access in Windows Small Business
| Server
| | | 2003
| | | | | | | http://support.microsoft.com/kb/825763/en-us
| | | | | | |
| | | | | | | Two network adapters - direct connection to broadband
| | | | | | | a. On the Connection Type page, click Broadband, and then
| click
| | | | Next.
| | | | | | | b. On the Broadband Connection page, under My server uses a
| | direct
| | | | | | | broadband connection, click Next.
| | | | | | | c. If your network connection to the Internet is disabled,
you
| | | will
| | | | | | | receive the Network Connection, You must enable and configure
| the
| | | | | network
| | | | | | | connection to your ISP page. If you do not receive this page,
| go
| | to
| | | | | step
| | | | | | e.
| | | | | | | On this page, under Connection name, click Network
Connection.
| | | | | | | d. Configure IP settings according to the requirements of
your
| | | ISP,
| | | | | and
| | | | | | | then click Next. (The network connection is now enabled.)
| | | | | | | e. On the Network Connection, You must click the connection
| for
| | | your
| | | | | ISP
| | | | | | | and local network page, under ISP network connection, click
| | Network
| | | | | | | Connection.
| | | | | | | f. Under Local network connection, click Server Local Area
| | | | Connection,
| | | | | | and
| | | | | | | then click Next.
| | | | | | | g. On the Direct Broadband Connection page, next to
Preferred
| | DNS
| | | | | server
| | | | | | | and Alternate DNS server, type the IP addresses that are
| provided
| | | by
| | | | | your
| | | | | | | ISP. To change the Default gateway setting, type the default
| | | gateway
| | | | IP
| | | | | | | address if the IP address is not provided by DHCP. Click
Next.
| | | | | | | h. Complete the Configure E-mail and Internet Connection
| Wizard.
| |
| | | | | | |
| | | | | | | Or you may like to using another alternative solution which
you
| | may
| | | | | need
| | | | | | a
| | | | | | | additional switch:
| | | | | | |
| | | | | | | a. 1 RJ45 Cable from the Modem to the internet port of
Linksys
| | | | router.
| | | | | | | Configure the internet port to use the static IP address
which
| | you
| | | | got
| | | | | | from
| | | | | | | ISP.
| | | | | | | b. 1 RJ45 cable from Linksys router to SBS external NIC, set
| SBS
| | | | | external
| | | | | | | NIC an IP address such as 10.0.0.x
| | | | | | | c. 1 RJ45 cable from SBS internal NIC to the switch. Set SBS
| | | internal
| | | | | NIC
| | | | | | | IP to 192.168.0.x
| | | | | | | d. Enable DHCP and DNS service on SBS server. Adjust the DHCP
| | | | settings
| | | | | | that
| | | | | | | set SBS server's internal IP address as client's DNS and
| default
| | | | | gateway.
| | | | | | | e. 1 RJ45 Cables from the Switch connect to XP client.
| | | | | | | f. Disable DHCP function on Linksys Router. Disable wireless
| | | function
| | | | | of
| | | | | | | the router.
| | | | | | | g. Run the Configure Email and Internet Connection Wizard on
| SBS
| | | | | server.
| | | | | | |
| | | | | | | Two network adapters - manual router connection to broadband
| | | | | | | a. If you receive a dialog box that says that a UPnP router
| was
| | | | | detected
| | | | | | | and you want to configure the router automatically, go to the
"
| | Two
| | | | | | network
| | | | | | | adapters - UPnP router connection to broadband " section.
| | | | | | | b. Click No to the question "Do you want the wizard to
| configure
| | | the
| | | | | | | router?"
| | | | | | | c. On the Connection Type page, click Broadband, and then
| click
| | | | Next.
| | | | | | | d. On the Broadband Connection page, under My server uses,
| click
| | A
| | | | | local
| | | | | | | router device with an IP address, and then click Next.
| | | | | | | e. On the Router Connection page, next to Preferred DNS
server
| | and
| | | | | | | Alternate DNS server, type the IP addresses that are provided
| by
| | | your
| | | | | | ISP.
| | | | | | | In the Local IP address of router box, type the IP address of
| the
| | | | | router
| | | | | | | that the server uses to connect to the router.
| | | | | | | f. Click to clear the My server uses a single network
| connection
| | | for
| | | | | | both
| | | | | | | Internet access and the local network check box, and then
click
| | | Next.
| | | |
| | | | | | | g. On the Network Connection, You must enable and configure
| the
| | | | | network
| | | | | | | connection to your ISP page, under the Connection Name, click
| | | Network
| | | | | | | Connection.
| | | | | | | h. If your router provides DHCP, click Obtain an IP address
| | | | | | automatically
| | | | | | | (use DHCP). If your router does not provide DHCP, click Use
the
| | | | | following
| | | | | | | IP address, and then type the IP address and the subnet mask
in
| | | | | | accordance
| | | | | | | with the router settings. The default gateway is the IP
address
| | of
| | | | the
| | | | | | | router.
| | | | | | | i. Click Next.
| | | | | | |
| | | | | | | The network connection is now enabled.
| | | | | | | j. On the Network Connection, You must click the connection
| for
| | | your
| | | | | ISP
| | | | | | | and local network page, click Network Connection under the
ISP
| | | | network
| | | | | | | connection.
| | | | | | | k. Under the Local network connection, click Server Local
Area
| | | | | | Connection,
| | | | | | | and then click Next.
| | | | | | | l. Complete the Configure E-mail and Internet Connection
| Wizard.
| |
| | | | | | |
| | | | | | | By the way, you current scenario may also can work if you
| modify
| | | the
| | | | | SBS
| | | | | | | internal NIC by go to SBS console\Internet and Email then
| | clicking
| | | | | | "Change
| | | | | | | Server IP Address", following the wizard to change to another
| | | | internal
| | | | | | | network(For example 10.0.0.x) and re-run the CEICW. Set the
XP
| | | client
| | | | | to
| | | | | | | the same network(10.0.0.x). But it may lead to potential
risks.
| | | Also
| | | | | | | considering you have 10 clients but the Linksys Router have
| only
| | 4
| | | | | ports.
| | | | | | | An additional switch is necessary.
| | | | | | |
| | | | | | | Also if the problem still happens, please help to run the
| | commands:
| | | | | | | ipconfig /all and ROUTE PRINT on both server and client for
| | | further
| | | | | | | analysis.
| | | | | | |
| | | | | | | Hope it helps.
| | | | | | |
| | | | | | | Best regards,
| | | | | | |
| | | | | | | Gary Wang(MSFT)
| | | | | | |
| | | | | | | Microsoft CSS Online Newsgroup Support
| | | | | | |
| | | | | | | Get Secure! - www.microsoft.com/security
| | | | | | |
| | | | | | | =====================================================
| | | | | | | This newsgroup only focuses on SBS technical issues. If you
| have
| | | | issues
| | | | | | | regarding other Microsoft products, you'd better post in the
| | | | | | corresponding
| | | | | | | newsgroups so that they can be resolved in an efficient and
| | timely
| | | | | | manner.
| | | | | | | You can locate the newsgroup here:
| | | | | | |
| http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| | | | | | |
| | | | | | | When opening a new thread via the web interface, we recommend
| you
| | | | check
| | | | | | the
| | | | | | | "Notify me of replies" box to receive e-mail notifications
when
| | | there
| | | | | are
| | | | | | | any updates in your thread. When responding to posts via your
| | | | | newsreader,
| | | | | | | please "Reply to Group" so that others may learn and benefit
| from
| | | | your
| | | | | | | issue.
| | | | | | |
| | | | | | | Microsoft engineers can only focus on one issue per thread.
| | | Although
| | | | we
| | | | | | | provide other information for your reference, we recommend
you
| | post
| | | | | | | different incidents in different threads to keep the thread
| | clean.
| | | In
| | | | | | doing
| | | | | | | so, it will ensure your issues are resolved in a timely
manner.
| | | | | | |
| | | | | | | For urgent issues, you may want to contact Microsoft CSS
| | directly.
| | | | | Please
| | | | | | | check http://support.microsoft.com for regional support phone
| | | numbers.
| | | | | | |
| | | | | | | Any input or comments in this thread are highly appreciated.
| | | | | | | =====================================================
| | | | | | |
| | | | | | | This posting is provided "AS IS" with no warranties, and
| confers
| | no
| | | | | | rights.
| | | | | | |
| | | | | | | --------------------
| | | | | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | | | | | Organization: Microsoft
| | | | | | | | Date: Tue, 13 May 2008 10:16:49 GMT
| | | | | | | | Subject: RE: Problems with Permissions
| | | | | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | | | | MIME-Version: 1.0
| | | | | | | | Content-Type: text/plain
| | | | | | | | Content-Transfer-Encoding: 7bit
| | | | | | | |
| | | | | | | | From: Wayne Smith [mailto:waynesmith1971@xxxxxxxxxxx]
| | | | | | | | Sent: Tuesday, May 13, 2008 11:56 AM
| | | | | | | | To: Guo-Zhen Wang (Gems Lab)
| | | | | | | | Subject: Re: Follow Up For Microsoft SBS Public Newsgroup
| Post
| | | | | | [Problems
| | | | | | | | with Permissions] with Gary Wang (94820911)
| | | | | | | |
| | | | | | | | Hello Gary,
| | | | | | | | Firstly can I say a big thank you for taking the time and
| | trouble
| | | | to
| | | | | | try
| | | | | | | | and help me with this issue, when I posted my message to
the
| | | | | newsgroup
| | | | | | I
| | | | | | | | certainly didn't expect a Microsoft support technician to
| reply
| | | and
| | | | | try
| | | | | | | to
| | | | | | | | help resolve this problem, it is enormously appreciated.
| | | | | | | |
| | | | | | | | I have checked the thread of the newsgroup post after
reading
| | | your
| | | | | | email
| | | | | | | | and unfortunately I cannot see your reply so I hope you
won't
| | | mind
| | | | me
| | | | | | | | emailing you direct.
| | | | | | | |
| | | | | | | | I should explain that since I posted that message a few
days
| | ago,
| | | I
| | | | | | have
| | | | | | | | attempted countless different scenarios to try and fix the
| | | problem,
| | | | | but
| | | | | | | so
| | | | | | | | far without any success, and I may have actually made
things
| | | worse.
| | | | | As
| | | | | | it
| | | | | | | | currently stands the SBS 2003 machine is switched off and
I'm
| | | | | | connecting
| | | | | | | | directly to the internet through my XP Professional machine
| -I
| | | have
| | | | | | tried
| | | | | | | | literally everything I can think of to resolve the problem
| and
| | | | right
| | | | | | now
| | | | | | | I
| | | | | | | | must confess I feel completely drained and frustrated by
the
| | | whole
| | | | | | | process.
| | | | | | | |
| | | | | | | | With that said however, everything I have seen of Small
| | Business
| | | | | Server
| | | | | | | so
| | | | | | | | far leads me to believe it is worth pursuing, I am sure
that
| | | | perhaps
| | | | | my
| | | | | | | | inexperience and lack of knowledge on certain technical
| issues
| | is
| | | | the
| | | | | | | real
| | | | | | | | culprit and no doubt when I do finally get everything up
and
| | | | running,
| | | | | I
| | | | | | | | will sigh a huge relief and take some important lessons
| learnt
| | | from
| | | | | the
| | | | | | | | process.
| | | | | | | |
| | | | | | | | Just to give you a broad background of the problems I seem
to
| | be
| | | | | | | | experiencing, what I am trying to do is set up the SBS
| machine
| | | with
| | | | | | only
| | | | | | | | one XP Pro machine connected at the moment, once I have
that
| | | | | configured
| | | | | | | and
| | | | | | | | working correctly I intend to connect a handful of other XP
| Pro
| | | | | | machines
| | | | | | | | and possibly even one or two Apple Mac computers to the
| | network,
| | | | but
| | | | | | all
| | | | | | | of
| | | | | | | | that is for later - right now my only concern is to get the
| SBS
| | | and
| | | | | one
| | | | | | | XP
| | | | | | | | Pro machine talking to each other.
| | | | | | | |
| | | | | | | | I have a broadband Internet connection through my ISP with
a
| | | static
| | | | | IP
| | | | | | | | address, I have a Linksys Wireless-G Broadband Router,
which
| I
| | | | intend
| | | | | | to
| | | | | | | | use for the client machines to connect to the Internet
| through
| | a
| | | | | | wireless
| | | | | | | | connection, but at the moment I am content to connect this
XP
| | Pro
| | | | box
| | | | | | to
| | | | | | | | the router with a network cable. On the back of the router,
| | there
| | | | are
| | | | | 4
| | | | | | | | network cable ports and one Internet port, in the SBS
machine
| I
| | | | have
| | | | | | two
| | | | | | | | RJ-45 NIC's. And I also have a broadband modem provided by
my
| | ISP.
| | | | | | | |
| | | | | | | | No matter how I try to configure everything, I seem to have
a
| | | whole
| | | | | | range
| | | | | | | | of different outcomes except the one I want. Obviously the
| | ideal
| | | | | | solution
| | | | | | | | would be to have the SBS machine set up and configured for
| | | network
| | | | | | access
| | | | | | | | and Internet access, with each client machine connecting
| | through
| | | | the
| | | | | | SBS
| | | | | | | | machine for network & Internet access, but I seem to get
| | Internet
| | | | | | access
| | | | | | | on
| | | | | | | | the Server and no network access, Internet access on the
| Server
| | | and
| | | | | XP
| | | | | | | Pro
| | | | | | | | box but no network access, network connectivity from the
| Server
| | | to
| | | | | the
| | | | | | XP
| | | | | | | | Pro box but not the other way around ... and just about
| | anything
| | | | else
| | | | | | you
| | | | | | | | could imagine except what I really want.
| | | | | | | |
| | | | | | | | Although I maybe wrong in my assumptions, I feel sure the
| | problem
| | | | | lies
| | | | | | | | either somewhere with the way I have the Router connected
and
| | | | | | configured
| | | | | | | or
| | | | | | | | the way I have assigned IP addresses to the network cards
and
| | | | perhaps
| | | | | I
| | | | | | | | have included too much information below, but I would much
| | rather
| | | | you
| | | | | | | know
| | | | | | | | how I have everything configured from the start, and to
spend
| a
| | | | | | | | considerable time checking things only to find I have made
a
| | | simple
| | | | | | | mistake
| | | | | | | | with part of my configuration later that I failed to
mention
| | from
| | | | the
| | | | | | | | beginning.
| | | | | | | |
| | | | | | | | The network is currently configured as follows:
| | | | | | | |
| | | | | | | | Internet Connection
| | | | | | | | > Broadband Modem provided by ISP with one Static IP Address
| | | | | | | | - 1 RJ45 Cable from the Modem to the 'Internet' port on the
| | | Linksys
| | | | | | Router
| | | | | | | | - 2 RJ45 Cables from the Linksys Router to 2 NIC's on the
SBS
| | Box
| | | | | | | | - 1 RJ45 Cable from the Linksys Router to 1 XP Pro Box
| | | | | | | |
| | | | | | | | The two NIC's on the SBS Box are labeled as follows:
| | | | | | | | - Server Local Area Connection
| | | | | | | | - Network Connection
| | | | | | | |
| | | | | | |
| | | | | |
| | | | |
| | | |
| | |
| |
|
============================================================================
| | | | | | | | =======
| | | | | | | | The 'Server Local Area Connection' has been configured
| manually
| | | | with
| | | | | | the
| | | | | | | | following IP Address:
| | | | | | | | - IP Address: 192.168.71.99
| | | | | | | | - Subnet Mask: 255.255.255.0
| | | | | | | | - Default Gateway:
| | | | | | | | - Preferred DNS Server: 192.168.71.99
| | | | | | | | - Alternate DNS Server:
| | | | | | | |
| | | | | | | | The 'Network Connection' has been configured manually with
| the
| | | | | | following
| | | | | | | IP
| | | | | | | | Address:
| | | | | | | | - IP Address: 192.168.71.101
| | | | | | | | - Subnet Mask: 255.255.255.0
| | | | | | | | - Default Gateway: 192.168.71.1
| | | | | | | | - Preferred DNS Server: 192.168.71.99
| | | | | | | | - Alternate DNS Server:
| | | | | | | |
| | | | | | |
| | | | | |
| | | | |
| | | |
| | |
| |
|
============================================================================
| | | | | | | | =======
| | | | | | | | The 'Local Area Connection' on the Windows XP Professional
| | | machine
| | | | | has
| | | | | | | been
| | | | | | | | manually configured with the following IP Address:
| | | | | | | | - IP Address: 192.168.71.103
| | | | | | | | - Subnet Mask: 255.255.255.0
| | | | | | | | - Default Gateway: 86.21.x.x (full static IP not shown for
| | | security
| | | | | | | reasons)
| | | | | | | | - Preferred DNS Server: 194.168.4.100 (preferred DNS
provided
| | by
| | | | ISP)
| | | | | | | | - Alternate DNS Server: 194.168.8.100 (alternate DNS
provided
| | by
| | | | ISP)
| | | | | | | |
| | | | | | |
| | | | | |
| | | | |
| | | |
| | |
| |
|
============================================================================
| | | | | | | | =======
| | | | | | | | The Linksys Wireless-G Broadband Router has been configured
| as
| | | | | follows:
| | | | | | | | - Local IP Address: 192.168.71.1
| | | | | | | | - Subnet Mask: 255.255.255.0
| | | | | | | | - Gateway: 0.0.0.0
| | | | | | | | - Local DNS: 0.0.0.0
| | | | | | | |
| | | | | | | | - DHCP: Enabled
| | | | | | | | - Starting IP Address: 192.168.71.100
| | | | | | | | - Maximum Number of DHCP Users: 50
| | | | | | | | - Current Lease Time: 1440 minutes
| | | | | | | | - Static DNS 1: 0.0.0.0
| | | | | | | | - Static DNS 2: 0.0.0.0
| | | | | | | | - Static DNS 3: 0.0.0.0
| | | | | | | | - WINS: 0.0.0.0
| | | | | | | |
| | | | | | | | Security:
| | | | | | | | - Firewall Protection: Disabled
| | | | | | | | - Block Anonymous Internet Requests: No
| | | | | | | |
| | | | | | | | VPN:
| | | | | | | | - IPSec Passthrough: Enabled
| | | | | | | | - PPTP Passthrough: Enabled
| | | | | | | | - L2TP Passthrough: Enabled
| | | | | | | |
| | | | | | | | Port Range Forward:
| | | | | | | | Application Start End Protocol IP Address

|
| |
| | | | | | Enabled
| | | | | | | | Exchange..........25 25 TCP
192.168.71.101
|
| |
| | | | Yes
| | | | | | | | Web Server.......80 80 TCP
192.168.71.101
|
| |
| | | Yes
| | | | | | | | SSL.................443 443 TCP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | SharePoint........444 444 TCP
192.168.71.101
|
| |
| | | Yes
| | | | | | | | RemoteWeb.......4125 4125 TCP 192.168.71.101

| | Yes
| | | | | | | | VPN.................1723 1723 TCP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | TS...................3389 3389 TCP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | FTP.................21 21 TCP
| | 192.168.71.101
| | |
| | | |
| | | | | Yes
| | | | | | | | File Sharing......135 139 UDP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | File Sharing......135 139 TCP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | File Sharing......445 445 TCP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | | File Sharing......445 445 UDP
| 192.168.71.101
| |
| | |
| | | | Yes
| | | | | | | |
| | | | | | | | Management:
| | | | | | | | - Remote Management: Enabled
| | | | | | | | - Management Port: 8080
| | | | | | | | - Use https: Yes
| | | | | | | |
| | | | | | | | - AP Watchdog: Disabled
| | | | | | | |
| | | | | | | | - Boot WAN: Off
| | | | | | | |
| | | | | | | | - Cron: Disabled
| | | | | | | |
| | | | | | | | - Dhcpd: Enabled
| | | | | | | | - Used Domain: WAN
| | | | | | | | - LAN Domain:
| | | | | | | |
| | | | | | | | - DNS Masq: Disabled
| | | | | | | | - Local DNS: Disabled
| | | | | | | |
| | | | | | | | - HTTPS: Enabled
| | | | | | | |
| | | | | | | | - Loopback: Enabled
| | | | | | | |
| | | | | | | | - 802.1x: Disabled
| | | | | | | |
| | | | | | | | - NTP Client: Disabled
| | | | | | | |
| | | | | | | | - PPTP Server: Disabled
| | | | | | | |
| | | | | | | | - Resetbuttond: Enabled
| | | | | | | |
| | | | | | | | - Routing: Enabled
| | | | | | | |
| | | | | | | | - SNMP: Disabled
| | | | | | | |
| | | | | | | | - SSHD: Disabled
| | | | | | | |
| | | | | | | | - Syslod: Disabled
| | | | | | | |
| | | | | | | | - Telnet: Disabled
| | | | | | | |
| | | | | | | | - UPnP: Enabled
| | | | | | | |
| | | | | | |
| | | | | |
| | | | |
| | | |
| | |
| |
|
============================================================================
| | | | | | | | =======
| | | | | | | |
| | | | | | | | I have proceeded through the Internet & Email connection
| wizard
| | | in
| | | | | SBS
| | | | | | | 2003
| | | | | | | | countless times to change different IP Addresses and other
| | | | | configurable
| | | | | | | | options, simply to see if anything else made a noticeable
| | | | difference
| | | | | | but
| | | | | | | | the way I have everything configured at the moment is
giving
| me
| | | | | | Internet
| | | | | | | | access on both the SBS Box and the XP Pro box but no
network
| | | | | | | connectivity,
| | | | | | | | although I can log on to the XP machine using the
credentials
| | | that
| | | | I
| | | | | | | | created on the SBS Box but I cannot exchange files between
| the
| | | two
| | | | | | | machines
| | | | | | | | or browse either computer in My Network Places.
| | | | | | | |
| | | | | | | | If anything looks immediately obvious to you, that perhaps
I
| | have
| | | | | | | | overlooked, I would of course be incredibly grateful for
your
| | | | | feedback.
| | | | | | I
| | | | | | | | have even tried plugging the RJ45 cable from the Broadband
| | modem
| | | | into
| | | | | | one
| | | | | | | | of the network ports on the Linksys Router and then one
RJ45
| | | cable
| | | | | from
| | | | | | | the
| | | | | | | | 'Network Connection' NIC on the Server to the 'Internet'
port
| | on
| | | | the
| | | | | | | | Linksys Router, more out of curiosity than anything else
| simply
| | | to
| | | | | see
| | | | | | if
| | | | | | | | it solved my problem, but all that seems to do is give me
an
| IP
| | | | | Address
| | | | | | | | conflict when I configure the IP Address to the static IP
| | Address
| | | | as
| | | | | | | | provided by my ISP.
| | | | | | | |
| | | | | | | | I realize this may possibly seem very complicated to
someone
| | who
| | | | | isn't
| | | | | | | | sitting in front of my network, and to be fair it's even
more
| | | | | | complicated
| | | | | | | | to someone who is, but any help, suggestions or pointers
| would
| | be
| | | | | | greatly
| | | | | | | | appreciated.
| | | | | | | |
| | | | | | | | Kind Regards,
| | | | | | | | Wayne Smith
| | | | | | | |
| | | | | | | |
| | | | | | | | --------------------
| | | | | | | | | X-Tomcat-ID: 84204082
| | | | | | | | | References:
| | <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | | | | | | | MIME-Version: 1.0
| | | | | | | | | Content-Type: text/plain
| | | | | | | | | Content-Transfer-Encoding: 7bit
| | | | | | | | | From: v-gzwang@xxxxxxxxxxxxxxxxxxxx (Guozhen Wang[MSFT])
| | | | | | | | | Organization: Microsoft
| | | | | | | | | Date: Mon, 12 May 2008 11:48:54 GMT
| | | | | | | | | Subject: RE: Problems with Permissions
| | | | | | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | | | | | Message-ID: <Pzv4vYCtIHA.5796@xxxxxxxxxxxxxxxxxxxxxx>
| | | | | | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | | | | | Lines: 151
| | | | | | | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | | | | | | Xref: TK2MSFTNGHUB02.phx.gbl
| | | | | | microsoft.public.windows.server.sbs:107240
| | | | | | | | | NNTP-Posting-Host: tk5tomimport2.phx.gbl 10.201.218.20
| | | | | | | | |
| | | | | | | | | Hello Wayne,
| | | | | | | | |
| | | | | | | | | Thank you for your post and thanks for Cliff's great
inputs.
| | | | | | | | |
| | | | | | | | | My name is Gary Wang, and it is my pleasure to work with
| you
| | on
| | | | | this
| | | | | | | | issue!
| | | | | | | | |
| | | | | | | | | Please allow me to confirm that my understandings are
| | correct.
| | | As
| | | | I
| | | | | | | | | understand it, the issue is:
| | | | | | | | |
| | | | | | | | | You cannot create network share place from SBS server to
XP
| | | | client
| | | | | | even
| | | | | | | | you
| | | | | | | | | had delegate full control permission to the share folder.
| | | | | | | | |
| | | | | | | | | If I have misunderstood your concerns please feel free to
| let
| | | me
| | | | | know.
| | | | | | | | |
| | | | | | | | | Suggestion :
| | | | | | | | | ==============
| | | | | | | | | I would like to suggest that you check the following:
| | | | | | | | |
| | | | | | | | | 1. Check whether you can ping the XP client's computer
name
| | and
| | | | IP
| | | | | | | | address
| | | | | | | | | from SBS server.
| | | | | | | | |
| | | | | | | | | 2. Please check the shared permission and NTFS permission
| of
| | | the
| | | | | | shared
| | | | | | | | | folder on XP, to ensure your user account have full
| | permission
| | | of
| | | | | the
| | | | | | | | | folder.
| | | | | | | | |
| | | | | | | | | 3. Please ensure you join the client computer to SBS
domain
| | | thru
| | | | | | | | | connectcomputer wizard. We recommend that the client
| connect
| | to
| | | | | | | | | http://SBSServername/connectcomputer and following the
| wizard
| | | to
| | | | | join
| | | | | | | SBS
| | | | | | | | | domain.
| | | | | | | | |
| | | | | | | | | 4. Please try to create a new shared folder on XP and
then
| | test
| | | | | this
| | | | | | | | issue.
| | | | | | | | |
| | | | | | | | | 5. If there are any firewall/anti-virus software on the
XP
| | | | client,
| | | | | | | please
| | | | | | | | | disable it temporarily as a test. Note that please
perform
| a
| | | full
| | | | | | scan
| | | | | | | to
| | | | | | | | | make sure your system is clean before disable them.
| | | | | | | | |
| | | | | | | | | 6. Make sure File and Printing Share protocol is enabled
on
| | the
| | | | SBS
| | | | | | | | server.
| | | | | | | | | Please go to Control Panel - Network Connections, double
| | click
| | | | your
| | | | | | NIC
| | | | | | | | and
| | | | | | | | | choose Properties. Make sure the "File and Printing
Sharing
| | for
| | | | | | | Microsoft
| | | | | | | | | Network" is checked.
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | If we cannot resolve the issue after we perform the above
| | | steps,
| | | | | | please
| | | | | | | | | help me collect some information for further
investigation:
| | | | | | | | |
| | | | | | | | | Information Need
| | | | | | | | | ==============
| | | | | | | | | 1. Please run the command: ipconfig /all on both server
| and
| | | | | client,
| | | | | | | then
| | | | | | | | | post the result back here.
| | | | | | | | | 2. Please capture a screenshot of the exact symptom and
| send
| | | to
| | | | me
| | | | | | at
| | | | | | | | | v-gzwang@xxxxxxxxxxxxxx
| | | | | | | | | 3. Check event viewer for related error message. If
there
| | any,
| | | | | | please
| | | | | | | | save
| | | | | | | | | as *.evt file and send to me
| | | | | | | | | 4. Does this issue happen on every XP client?
| | | | | | | | |
| | | | | | | | | I look forward to your reply. Also, if you have any
| questions
| | | or
| | | | | | | | concerns,
| | | | | | | | | please do not hesitate to let me know. I am happy to
help.
| :-)
| | | | | | | | |
| | | | | | | | | Thank you for your time and cooperation!
| | | | | | | | |
| | | | | | | | | Best regards,
| | | | | | | | |
| | | | | | | | | Gary Wang(MSFT)
| | | | | | | | |
| | | | | | | | | Microsoft CSS Online Newsgroup Support
| | | | | | | | |
| | | | | | | | | Get Secure! - www.microsoft.com/security
| | | | | | | | |
| | | | | | | | | =====================================================
| | | | | | | | | This newsgroup only focuses on SBS technical issues. If
you
| | | have
| | | | | | issues
| | | | | | | | | regarding other Microsoft products, you'd better post in
| the
| | | | | | | | corresponding
| | | | | | | | | newsgroups so that they can be resolved in an efficient
and
| | | | timely
| | | | | | | | manner.
| | | | | | | | | You can locate the newsgroup here:
| | | | | | | | |
| | | http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| | | | | | | | |
| | | | | | | | | When opening a new thread via the web interface, we
| recommend
| | | you
| | | | | | check
| | | | | | | | the
| | | | | | | | | "Notify me of replies" box to receive e-mail
notifications
| | when
| | | | | there
| | | | | | | are
| | | | | | | | | any updates in your thread. When responding to posts via
| your
| | | | | | | newsreader,
| | | | | | | | | please "Reply to Group" so that others may learn and
| benefit
| | | from
| | | | | | your
| | | | | | | | | issue.
| | | | | | | | |
| | | | | | | | | Microsoft engineers can only focus on one issue per
thread.
| | | | | Although
| | | | | | we
| | | | | | | | | provide other information for your reference, we
recommend
| | you
| | | | post
| | | | | | | | | different incidents in different threads to keep the
thread
| | | | clean.
| | | | | In
| | | | | | | | doing
| | | | | | | | | so, it will ensure your issues are resolved in a timely
| | manner.
| | | | | | | | |
| | | | | | | | | For urgent issues, you may want to contact Microsoft CSS
| | | | directly.
| | | | | | | Please
| | | | | | | | | check http://support.microsoft.com for regional support
| phone
| | | | | numbers.
| | | | | | | | |
| | | | | | | | | Any input or comments in this thread are highly
appreciated.
| | | | | | | | | =====================================================
| | | | | | | | |
| | | | | | | | | This posting is provided "AS IS" with no warranties, and
| | | confers
| | | | no
| | | | | | | | rights.
| | | | | | | | |
| | | | | | | | | --------------------
| | | | | | | | | | From: "Wayne Smith" <waynesmith1971@xxxxxxxxxxx>
| | | | | | | | | | Subject: Problems with Permissions
| | | | | | | | | | Date: Fri, 9 May 2008 06:30:06 +0100
| | | | | | | | | | Lines: 2
| | | | | | | | | | Message-ID:
| | | <A97222DE-98AE-4B0A-9EFD-6C242DE3B17C@xxxxxxxxxxxxx>
| | | | | | | | | | MIME-Version: 1.0
| | | | | | | | | | Content-Type: multipart/alternative;
| | | | | | | | | | boundary="----=_NextPart_000_003D_01C8B19E.1F43B820"
| | | | | | | | | | X-Priority: 3
| | | | | | | | | | X-MSMail-Priority: Normal
| | | | | | | | | | Importance: Normal
| | | | | | | | | | X-Newsreader: Microsoft Windows Live Mail 12.0.1606
| | | | | | | | | | X-MimeOLE: Produced By Microsoft MimeOLE V12.0.1606
| | | | | | | | | | X-MS-CommunityGroup-MessageCategory:
| | | | | | | | | {E4FCE0A9-75B4-4168-BFF9-16C22D8747EC}
| | | | | | | | | | X-MS-CommunityGroup-PostID:
| | | | {A97222DE-98AE-4B0A-9EFD-6C242DE3B17C}
| | | | | | | | | | Newsgroups: microsoft.public.windows.server.sbs
| | | | | | | | | | Path: TK2MSFTNGHUB02.phx.gbl
| | | | | | | | | | Xref: TK2MSFTNGHUB02.phx.gbl
| | | | | | | microsoft.public.windows.server.sbs:106919
| | | | | | | | | | NNTP-Posting-Host: TK2MSFTNGHUB02.phx.gbl 127.0.0.1
| | | | | | | | | | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | | | | | | | | |
| | | | | | | | | | Applies to: Small Business Server 2003 & Windows XP
| | | | Professional
| | | | | | w/SP3
| | | | | | | | | | Hi everyone,
| | | | | | | | | | I wonder if someone may be able to help with a
| Permissions
| | | | issue
| | | | | I
| | | | | | | | have,
| | | | | | | | | I've got one SBS2003 machine up and running, and to the
| best
| | of
| | | | my
| | | | | | | | ability
| | | | | | | | | configured correctly, I've added a Windows XP Pro machine
| to
| | | the
| | | | | | | | computers
| | | | | | | | | and created an account for myself with Administrator
| | | privileges,
| | | | on
| | | | | | | both
| | | | | | | | | the SBS and XP machine I have shared certain folders and
| | | included
| | | | | my
| | | | | | | | | account in the Security with full permissions, from the
XP
| | box
| | | if
| | | | I
| | | | | | go
| | | | | | | to
| | | | | | | | | My Network Places I can create a new network place using
| | those
| | | | | shared
| | | | | | | | | folders from the SBS box, but if I try to do the same
from
| | the
| | | | SBS
| | | | | | box
| | | | | | | by
| | | | | | | | | creating a network place to a shared folder on the XP
| | machine,
| | | I
| | | | | get
| | | | | | an
| | | | | | | | | error message saying the network path cannot be found or
I
| | | don't
| | | | | have
| | | | | | | | | permission to access it.
| | | | | | | | | | I'm at a loss as to what I may be doing wrong because
| | clearly
| | | | my
| | | | | | user
| | | | | | | | | account is configured in Active Directory as I can log on
| to
| | | the
| | | | | | | Windows
| | | | | | | | XP
| | | | | | | | | machine using the credentials that I created in AD. Just
| for
| | | | | clarity
| | | | | | | the
| | | | | | | | | SBS box is also a Domain Controller if that makes any
| | | difference.
| | | | | | | | | | Can anyone see something obvious that I may be
| overlooking?
| | | | | | | | | | Any help, pointers or suggestions would be greatly
| | | appreciated.
| | | | | | | | | | Kind Regards,
| | | | | | | | | | Wayne
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | |
| | | | | |
| | | | |
| | | | |
| | | |
| | | |
| | |
| | |
| |
| |
|
|

.

Loading