Re: Netopia 3347NWG with Remote Desktop and Remote Web Workplace

Hi Greg,

Any help here?

Port Forwarding for the Netopia 3347NWG
http://portforward.com/english/routers/port_forwarding/Netopia/3347NWG/SuperSync.htm

You will need to forward ports 443, 4125 (both relating to RWW) and 3389
(for RDP use) to your SBS external NIC. Then re-run CEICW, enable the
firewall, select your services, complete the Web Server Certificate screen
and finish the rest of CEICW.

IMO, discarding external ping (not being able to ping the router) is a good
thing since it makes you a smaller target on the Internet.

--
Merv Porter [SBS-MVP]
============================

"Greg Kirkpatrick" <GregKirkpatrick@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:960F5D02-CBEF-4A02-A2A7-386BA3525606@xxxxxxxxxxxxxxxx
I currently have a Netopia 3347NWG, using PPOE to connect to Deltacom (a
local DSL), which is connected to the WAN Ethernet Adapter of an SBS 2003
Premium R1 (ISA not installed). The LAN Ethernet Adapter (of the SBS) is
set
to 192.168.16.2 and is connected to a switch into which is connected the
rest
of the office network.

IP passthrough is enabled in the Netopia's Expert - Configuration section
to
User Configured PC, and the WAN Ethernet Adapter has the static IP address
(72.xxx.xxx.xxx).

Despite that, external ping and RWW and RDP will not work.

Internally, I can use Remote Desktop from a workstation to access the
server
(via Remote Desktop Connection). I can also ping the server, on either
the
WAN or LAN adapter.

If I try to access RWW from the workstation via https://sbs2003/Remote, I
get "Internet Explorer cannot display this webpage".

If I try to access RWW from a workstation in the LAN via
https://192.168.16.2/Remote, I get "There is a problem with this website's
security certificate", and if I then click "Continue to this website (not
recommended)", I get "The page cannot be found" (HTTP error 404).

In IIS Admin, Default Website is running and can be browsed; companyweb
also
is running and can be browsed.

Remote Access directly into the Netopia setup works, via
http://72.xxx.xxx.xxx:8080.

Obviously, this needs to be changed, but prior message strings refer to
configuration settings which do not seem to be present on this Netopia
model.

There is a telnet access available to this Netopia, from a local
workstation, which seems to provide a lot more options -- with little
helpful
instruction. The userguide for the 3300 series models refers to nice
menus
appearing in the telnet session, but all I see are line-by-line responses.


.

Relevant Pages

  • Re: Remote Control of office LAN computers.
    ... Do you have both NICs connected to the Netopia or do you have the LAN NIC ... >>> connection is Netopia with DSL, ...
    (microsoft.public.windows.server.sbs)
  • Netopia 3347NWG with Remote Desktop and Remote Web Workplace
    ... I currently have a Netopia 3347NWG, using PPOE to connect to Deltacom (a ... local DSL), which is connected to the WAN Ethernet Adapter of an SBS 2003 ... and the WAN Ethernet Adapter has the static IP address ... (via Remote Desktop Connection). ...
    (microsoft.public.windows.server.sbs)
  • Re: Trying to set up VPN through Netopia 3347W
    ... You can configure the Netopia to provide PPTP or set it to pass PPTP to ... your SBS Server for VPN Connection. ... verify with Bellsouth. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Remote Control of office LAN computers.
    ... > connection (on the LAN side) is Netopia with DSL, ... > I've been able to connect to the SBS server through a VPN, ...
    (microsoft.public.windows.server.sbs)
Loading