Re: is RWW installed and working

Hi Thomas:

From inside the LAN, open IE:

https://server-ip/remote

you should get a welcome and logon page.

If you want to see what one looks like,

https://mail.sbsfaq.com/remote

which brings me to the second point. When you run the CEICW it asks for the
fqdn for the certificate for the server. If this has been done, don't
change anything unless you are certain of the consequences.

There must be a public DNS record that points to the name that is used here.

If it has never been done, you can use the Public ip address of your network
until you get a DNS record for that address that your users can type. The
reason we see https://mail.xxxxxx is because if you are receiving mail at
your SBS server, there is probably a DNS record for that already.

And, last point, you can get rid of the security warning by clicking on the
pink certificate warning part of the browsers address bar and accepting the
cert on your local system.

--
Larry

Please post the resolution to
your issue so that all can benefit.


"Thomas Kroljic" <tkroljic@xxxxxxxxx> wrote in message
news:%23G8H9cVoIHA.1420@xxxxxxxxxxxxxxxxxxxxxxx
All,
I'm new to SBS 2003 RWW. Can someone point me in the right direction as
to how I can tell if RWW is properly installed in my SBS2003 environment?
Also, when SBS was installed the consulting company named our server as
follows: servername.local

We do have a static IP address used in a 2 NIC environment.
Our website (companyname.com) is hosted on a ISP's server (godaddy.com)

So, if RWW is truely installed in our SBS environment, how would I access
this?

Thank you,
Thomas



.

Relevant Pages

  • RE: RWW Issues w/SBS2003
    ... I understand that the RWW on your SBS R2 ... You have to rerun the CEICW to make sure your SBS 2003 server have right ... On the Connection Type page, click Broadband, and then click Next. ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... Please post an IP ipconfig /all for the server and for the workstation ... I'm concerned that you can't access RWW by attaching a non-domain laptop (IP ... RRW using the public IP address specified in the Web Server Certificate ... If you can't remote into the SBS server from a port on the ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS.RWW Fatal Error
    ... I have now rebooted the server with a clean boot. ... And then I tried to logon again using RWW without logging of administrator ... We can disable all non-Microsoft services, reboot SBS and see if the issue ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS VPN setup?
    ... or another issue as server not beening seen on the ... I first got SBS 2k3 in the action pack in 2004 so...I know you say you haven't renewed yet, but unless you let it expire a LONG time ago, you should still have SBS 2k3 floating around. ... Do you really think it is easier to set up a RWW in SBS 2003 R2 ... Native VPN is just another network connection, so yes again, multiple connections are allowed...but I wouldn't recommend letting users log onto the server. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW - Application Server Disappears
    ... Now that I've joined the TS as a static IP server to the domain it doesn't ... It does however still show up in the admin RWW and the ... Les Connor [SBS Community Member - SBS MVP] ...
    (microsoft.public.windows.server.sbs)
Loading