Re: Forwarding port to a member server

Tech-Archive recommends: Fix windows errors by optimizing your registry

Go to Administrative Tools | Routing and Remote Access, select IP Routing | NAT/Basic Firewall, click on the WAN Connection (external NIC), Services and Ports tab click 'Add', give a description, type 7862 in the incoming and outgoing port textboxes and the IP address of the member server.

Hope that helps

--
Costas


"John" <info@xxxxxxxxxxxxxxxxxxxx> wrote in message news:e39pMo8nIHA.2256@xxxxxxxxxxxxxxxxxxxxxxx
Hi

sbs 2003 standard. I have a typical two nic setup. I have forwarded port 7862 traffic from broadband router to the external nic of the sbs server. Is there a way to forward the 7862 traffic to a win 2003 member server connected to the internal network of sbs server?

Thanks

Regards


.

Relevant Pages

  • Re: How to open ports on the second server behind SBS?
    ... On the member server, go to Control Panel | Windows Firewall | Exceptions and add the port you want to open. ... If you want to route requests from the internet to the member server on the port you will open, go to SBS Administrative Tools | Routing and Remote Access, click on 'IP Routing' | 'NAT/Basic Firewall', right click on 'Network Connection', select 'Properties', click 'Services and Ports', click 'Add' provide the port you open and under 'Private address' the IP of the member server. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to open ports on the second server behind SBS?
    ... internet to the member server on the port you will open, ... Administrative Tools | Routing and Remote Access, ... 'NAT/Basic Firewall', right click on 'Network Connection', select ...
    (microsoft.public.windows.server.sbs)
  • Re: External trust and a member server
    ... I was not sure about that whether this issue is caused by firewall. ... please help me to capture a screen shot of the error ... Restricting Active Directory Replication Traffic to a Specific Port ... External trust and a member server ...
    (microsoft.public.win2000.active_directory)
  • RE: Routing problem
    ... You say you promote the properties in the send port. ... be promoted and BizTalk can use them to route the message. ... the messages gets suspended with a 0c0c01680 Routing Failure: ...
    (microsoft.public.biztalk.general)
  • Re: Cant use internal network after dialup modem is used -- get ping: sendto: Operation not permitte
    ... > "Where is the nameserver told what port to use to resolve hostnames into IP ... using the routing tables and the connect-to address ...
    (comp.os.linux.setup)