Re: ISA 2004 setup fails on brand new SBS 2003 Premium installatio

Thanks Merv - I found the change server IP wizard - but that just changes the
LAN IP and we don't want to change the whole LAN.

I went out and bought a new Ethernet Router and gave it's WAN connection a
direct internet connection. Then I connected the LAN side of the new router
to the SBS WAN NIC.

The two NICs in my SBS are now in different subnets.

I run the CEICW wizard and connect to the internet no problem. OWA and RWW
work fine.

I run ISA 2004 install and it stops when it progresses to installing MSDE
2000 SP4. Exactly the same as before. (Of course the original MSDE was
removed when I upgraded to SQL 2005 on the Premium Technologies disk).

If I re-run the CEICW wizard all is fine again.

Any other ideas?

"Larry Struckmeyer" wrote:

And, if you haven't already, please download and run the SBS Best Practices
Analyzer. You can find it with your favorite search engine.

(must be early for Merv) :-)

--
Larry

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:u$$oS6VnIHA.4208@xxxxxxxxxxxxxxxxxxxxxxx
Hi Graham,

The Change Server IP wizard can be at:

Server Management | Standard Management | Internet and Email | Change
Server IP Address

It will assist you in changing the SBS LAN NIC IP. The default for SBS
2003 is 192.168.16.1.

Another way is to change the LAN subnet in the router to be something like
192.168.10.x, putting the router at 192.168.10.1 and the WAN NIC at
192.168.10.2.

See the network configuration diagram at:

Two Nics, a static IP address, ISA, router
http://www.smallbizserver.net/Articles/tabid/266/articleType/ArticleView/articleId/76/Two-Nics-a-static-IP-address-ISA-router.aspx

There is also a KB article:

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

After you have the network physically set up, install ISA.

When everything is installed, run CEICW. One of Andy's articles shows you
how to use CEICW (Confgiure Email and Internet Connection Wizard)

CEICW Walkthrough
http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm

--
Merv Porter [SBS-MVP]
============================

"gocat2005" <gocat2005@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:07EB885E-F2FC-4193-BEBD-0EA60366A991@xxxxxxxxxxxxxxxx
Hi SG

Where would I find the "change server IP address wizard" and what would I
change the WAN adapter's IP address to be?

Regards
Graham

"SuperGumby [SBS MVP]" wrote:

two NICs in the same subnet is invalid. Run the 'change server IP
address
wiz' (ie. DO NOT do it manually, use the wiz).

"gocat2005" <gocat2005@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B73F93DC-2DA3-4196-A732-F0E11BA75A52@xxxxxxxxxxxxxxxx
Hello

SBS 2003 installed from CDs and setup procedures followed - all
systems
working fine including RWW, OWA etc.. Now I want to install ISA 2004.

ISA install stops at the point where it tries to install MSDE 2000 SP4
with
error "The wizard cannot install ISA server 2004. Try to install it
again
by
restarting the wizard ... etc etc". When I restart the wizard the same
error
occurs at the same place in the process.

Any suggestions please?

2 Nics in server attached to LAN switch in the 192.168.0.1-255 range
with
fixed IPs. One NIC is in the DMZ - so it is directly attached to the
internet. The other NIC is local LAN.
DHCP and DNS provided by SBS server.

Windows IP Configuration

Host Name . . . . . . . . . . . . : sbs
Primary Dns Suffix . . . . . . . : mydomain.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : mydomain.local

Ethernet adapter LAN:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II
GigE
(NDIS
VBD Client)
Physical Address. . . . . . . . . : 00-1D-09-6B-1C-82
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.9
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.9
Primary WINS Server . . . . . . . : 192.168.0.9

Ethernet adapter WAN:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II
GigE
(NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1D-09-6B-1C-84
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.9
Primary WINS Server . . . . . . . : 192.168.0.9
NetBIOS over Tcpip. . . . . . . . : Disabled










.

Relevant Pages

  • Re: Cant find add license wizard / server management console
    ... a clients server to solve a tricky issue and I shadow their session. ... wander around in DNS and DHCP and Exchange they let the Wizard do it. ... If you can't do a fresh install then at least an install on top and then go ... > the post install setup wizard, then you couldn't use your server properly. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 setup fails on brand new SBS 2003 Premium installatio
    ... It will assist you in changing the SBS LAN NIC IP. ... How to configure Internet access in Windows Small Business Server 2003 ... how to use CEICW (Confgiure Email and Internet Connection Wizard) ... Nics in server attached to LAN switch in the 192.168.0.1-255 range ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 setup fails on brand new SBS 2003 Premium installatio
    ... At present I am wiping the server and starting again (which is really ... so one trick is to rename it and run the install ... The two NICs in my SBS are now in different subnets. ... I run the CEICW wizard and connect to the internet no problem. ...
    (microsoft.public.windows.server.sbs)
  • Re: cannot browse from client, me too
    ... Did you rerun the internet connection wizard after you uninstalled the ISA? ... DNS server should be the internal IP address of the server. ... > I am not a professional, buy I have enough knowledge to install and setup ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 setup fails on brand new SBS 2003 Premium installatio
    ... Where would I find the "change server IP address wizard" and what would I ... wiz' ... ISA install stops at the point where it tries to install MSDE 2000 SP4 ...
    (microsoft.public.windows.server.sbs)