Re: Intel Hardware Raid



All the Intel raid controllers I touched had a web raid manager
software thing you load in Windows. If you read the pdf you get to the
raid manager after installing by http://serverneame:3570

On Sun, 24 Feb 2008 05:59:36 -0800 (PST), Printman2000
<printman2000@xxxxxxxxx> wrote:

have a server with an Intel 82801fr Sata Raid controller running a
Raid 1.

When the computer reboots, I can see the status of the drives, but
since this is a server, it does not reboot that often.

Does anyone know a utility that will run in windows and allow me to
see the status of the two drives?
.



Relevant Pages

  • Re: Can Surestore A1000 Array work with Dell Server
    ... > LUNs and manage the RAID etc. ... Or you could just install Raid Manager on the NT box. ... The A1000 was "intended" to be run on both Solaris and NT. ... Windows certification, and even appeared on the Microsoft Windows HCL for ...
    (comp.sys.sun.admin)
  • Storage Array Management
    ... The unit is functioning to the point that Windows ... format and utilize the 'pre-defined' LUNs. ... documentation that points to a version of RAID Manager ... the PC through an Adaptech EZ-SCSI Differential Controller. ...
    (microsoft.public.windows.server.general)
  • Re: RAID 1 SBS Standard SATA Drives booting up failed
    ... Jim Behning SBS MVP wrote: ... In a mirrored situation then you would be able to boot from ... Does it tell you one of the drives is bad? ... The raid manager then started to repair the degraded array. ...
    (microsoft.public.windows.server.sbs)
  • Raid manager utility
    ... Today as I walked into the office I noticed that one of the drives had ... failed and the hot swap had taken over. ... utility from the raid manager, but it refuses to start up. ... The raid utility ...
    (SunManagers)
  • CHKDSK will not run on external drive.
    ... I am running a Compaq Presario SR1710NX with Windows XP, ... I have two external hard drives. ... On one of them, CHKDSK works ... When my computer reboots, it ...
    (microsoft.public.windowsxp.perform_maintain)