Re: LAN ip subnet is moving off from a bigger enterprise

Hey Claus, that is true!

I don't need to make any change at all except for the switch and the
firewall.

How did I not thing of that, lol.

Would I still have to run the CEIW wizard again?

Helen

"Claus" <cjobes@xxxxxxxxxxxxx> wrote in message
news:O9q$IM%23bIHA.2268@xxxxxxxxxxxxxxxxxxxxxxx
If you move to your own switches you could just leave the current
10.104.x.x. in place.

If you want to change, follow the instructions in my first answer. To
avoid problems with potential VPN connections down the road I would
recommend using 192.168.16.x for you subnet. The key to a successful
switch is that you use the wizards. First the change server IP wizard and
then the CEICW. Then have your clients renew their DHCP lease and change
the static IPs.

--
Claus
"Helen Mooc" <hmooc@xxxxxxxxxx> wrote in message
news:OvkK269bIHA.1212@xxxxxxxxxxxxxxxxxxxxxxx
Hi guys,

Sorry I am not explain this right. Right now the SBS network is place in
/ integrated with one of the 6 VLAN they have. They want us to move off
of one of the VLAN and start a new IP schema for the network. Does that
make sense. Right now, the SBS network 10.104.x.x. We can even start
our own ip schema like 192.168.2.1 - 192.168.2.254.

I heard that AD does not like it too much when you change the IP, is that
too? Why?

Ya there is about 8 or 9 static IP servers/printers on the network that I
will have to change.

Thank you,

Helen

"Jim Behning SBS MVP" <jimbehning@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote
in message news:534br3l3hiul9b2ic621ndcr18a8kmhhka@xxxxxxxxxx
I'm with Claus. At the server you could go to the command prompt.
Ipconfig/all >c:\ipconfig.txt and post those results. It is possible
there is nothing to change.

On Thu, 14 Feb 2008 23:26:08 -0500, "Claus" <cjobes@xxxxxxxxxxxxx>
wrote:

Am I missing something? If you move the network onto its own isolated
subnet, why do you need to change the IPs?

Anyhow, if you want to change it (assuming that the SBS box is doing the
DHCP), all you need to do is run the "Change Sever IP" wizard, change to
what you want and then run the CEICW. Any hardware with a static IP
(printers etc.) need to be changed manually. Same goes for the BDC if it
has
a static IP. Make sure you also change the DNS on those static ones to
point
to the new IP of the SBS box.

--
Claus
"Helen Mooc" <hmooc@xxxxxxxxxx> wrote in message
news:%23DusEQ4bIHA.5892@xxxxxxxxxxxxxxxxxxxxxxx
Hello

Unfortunately the SBS company did not work out with the Enterprise one
and
as a result they will be moving off from the intergrate subnet VLAN
network. The SBS firm will start all over with the internal LAN ip
schema
basically but the public address will stay the same for the firewall.

I was wondering what I would have to watch out for in terms of moving
off
SBS into a new subnet plus all its file/blackberry/backup servers and
all
the printers too. I take it I will have to run the CEIW again when I
get
the new ip for SBS but what else. I just don't want any surprise as I
am
already have a whole load of other projects I have on hands as well.

BTW there is also a BDC to the SBS domain.

Thank you very much.

Helen






.

Relevant Pages

  • Re: New install into existing subnet
    ... AND it sounds like you're new to SBS. ... How to install Small Business Server 2003 in an existing Active Directory ... there's no reason for you to implement a new subnet. ... If the existing network was SBS you might want to look at ...
    (microsoft.public.windows.server.sbs)
  • Re: The SBS 2003 Network Configuration Wizard InOp
    ... I did use the computer wizard on the SBS 2003 to create the comptuer ... I read that you can manually connect the computer to the SBS 2003 domain by ... Network Configuration Wizard setup. ... ALL THE MACHINES are pointing directly to the SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 question - second subnet
    ... The phone subnet ... Can you give us a short overview of your network setup? ... Also post and ipconfig /all of the SBS and we can take a look at it. ... "ISA Server detected routes through adapter Server Local Area Connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Network Bridge on Client Not Possible?
    ... 10.0.0.0/255.0.0.0 subnet (Classic class A subnet allocated to private ... coming from the SBS server, ... There's nothing 'wrong' or non-SBS about the network config. ... In order to give it the network connection, ...
    (microsoft.public.windows.server.sbs)
  • Re: Install 3 times (triple crown)
    ... Build the customer SBS box enabling both nics ... network, as are the wan nics of the SBS boxes. ... how far can you go with the installation? ...
    (microsoft.public.windows.server.sbs)
Loading