Re: LAN ip subnet is moving off from a bigger enterprise

Hi guys,

Sorry I am not explain this right. Right now the SBS network is place in /
integrated with one of the 6 VLAN they have. They want us to move off of
one of the VLAN and start a new IP schema for the network. Does that make
sense. Right now, the SBS network 10.104.x.x. We can even start our own ip
schema like 192.168.2.1 - 192.168.2.254.

I heard that AD does not like it too much when you change the IP, is that
too? Why?

Ya there is about 8 or 9 static IP servers/printers on the network that I
will have to change.

Thank you,

Helen

"Jim Behning SBS MVP" <jimbehning@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:534br3l3hiul9b2ic621ndcr18a8kmhhka@xxxxxxxxxx
I'm with Claus. At the server you could go to the command prompt.
Ipconfig/all >c:\ipconfig.txt and post those results. It is possible
there is nothing to change.

On Thu, 14 Feb 2008 23:26:08 -0500, "Claus" <cjobes@xxxxxxxxxxxxx>
wrote:

Am I missing something? If you move the network onto its own isolated
subnet, why do you need to change the IPs?

Anyhow, if you want to change it (assuming that the SBS box is doing the
DHCP), all you need to do is run the "Change Sever IP" wizard, change to
what you want and then run the CEICW. Any hardware with a static IP
(printers etc.) need to be changed manually. Same goes for the BDC if it
has
a static IP. Make sure you also change the DNS on those static ones to
point
to the new IP of the SBS box.

--
Claus
"Helen Mooc" <hmooc@xxxxxxxxxx> wrote in message
news:%23DusEQ4bIHA.5892@xxxxxxxxxxxxxxxxxxxxxxx
Hello

Unfortunately the SBS company did not work out with the Enterprise one
and
as a result they will be moving off from the intergrate subnet VLAN
network. The SBS firm will start all over with the internal LAN ip
schema
basically but the public address will stay the same for the firewall.

I was wondering what I would have to watch out for in terms of moving
off
SBS into a new subnet plus all its file/blackberry/backup servers and
all
the printers too. I take it I will have to run the CEIW again when I
get
the new ip for SBS but what else. I just don't want any surprise as I
am
already have a whole load of other projects I have on hands as well.

BTW there is also a BDC to the SBS domain.

Thank you very much.

Helen


.

Relevant Pages

  • Re: New install into existing subnet
    ... AND it sounds like you're new to SBS. ... How to install Small Business Server 2003 in an existing Active Directory ... there's no reason for you to implement a new subnet. ... If the existing network was SBS you might want to look at ...
    (microsoft.public.windows.server.sbs)
  • Re: LAN ip subnet is moving off from a bigger enterprise
    ... moving the SBS network off of the integrated VLANs. ... Connect your switch to this ... Cisco Catalyst Vlan port 22 ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2004 question - second subnet
    ... The phone subnet ... Can you give us a short overview of your network setup? ... Also post and ipconfig /all of the SBS and we can take a look at it. ... "ISA Server detected routes through adapter Server Local Area Connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Network Bridge on Client Not Possible?
    ... 10.0.0.0/255.0.0.0 subnet (Classic class A subnet allocated to private ... coming from the SBS server, ... There's nothing 'wrong' or non-SBS about the network config. ... In order to give it the network connection, ...
    (microsoft.public.windows.server.sbs)
  • Re: Install 3 times (triple crown)
    ... Build the customer SBS box enabling both nics ... network, as are the wan nics of the SBS boxes. ... how far can you go with the installation? ...
    (microsoft.public.windows.server.sbs)
Loading