Re: Server Offline- need some advice

Bindings look OK. I did a print screen from ipconfig. Here it is:

http://www.jamesrorr.com/temp/ipconfig.bmp.

Thanks a lot for the help.

"Claus" wrote:

Can you please post an ipconfig/all from the box?

Also, did you check the bindings on the NICs?

--
Claus
"James Orr" <JamesOrr@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:03577121-D74F-4ED2-9082-37A63844E794@xxxxxxxxxxxxxxxx
OK, here is an update on where things stand:

It seems as if the first errors are DNS 5782, 5775 & 5774. I have done
some
research and still no dice.

I also cannot repair the connection- getting an error on clearing arp
cache.
However, if I do an arp -a, the arp cache is totally empty. This looks
really suspect to me, as my understanding would say if that's empty, I've
got
no shot communicating with other nodes. Any idea why that would be?

"James Orr" wrote:

Yesterday, a client told me he thought there was some type of file
corruption
on his SBS 2003 server, so I did a chkdsk at startup- pretty routine.

However, since that chkdsk, the server has been totally offline. The
clients can see/access/ping each other but can't get to the server and
the
server can't ping any clients. There were absolutely no changes to the
network setup; the chkdsk was the only thing I did.

After that, I tried redoing the IP stack, then doing a repair install of
Windows. No luck there. I also tried switching the IP address, checking
different cables, ports, etc. No luck.

Any suggestions?

Thanks.



.

Relevant Pages

  • Re: Server Offline- need some advice
    ... did you check the bindings on the NICs? ... However, if I do an arp -a, the arp cache is totally empty. ... However, since that chkdsk, the server has been totally offline. ...
    (microsoft.public.windows.server.sbs)
  • Re: Server Offline- need some advice
    ... If you issue the command this way: ... However, if I do an arp -a, the arp cache is totally empty. ... However, since that chkdsk, the server has been totally offline. ...
    (microsoft.public.windows.server.sbs)
  • Re: Server Offline- need some advice
    ... However, if I do an arp -a, the arp cache is totally empty. ... However, since that chkdsk, the server has been totally offline. ... No luck there. ...
    (microsoft.public.windows.server.sbs)
  • Re: Server Offline- need some advice
    ... However, if I do an arp -a, the arp cache is totally empty. ... However, since that chkdsk, the server has been totally offline. ... No luck there. ...
    (microsoft.public.windows.server.sbs)
  • Re: NLB Cluster - Ping fails or long time to reply from outside local subnet - SOLVED
    ... Once again, ARP is an RFC standard, if you are having to make static entries in unicast mode, then your network device is not in compliance. ... Windows Server 2008 Readiness Team ... I was feeling nervous about our teaming-capable adapter as I read it might be sending out heartbeats, so I disabled it AND configured the cluster on a separate DLink card in multicast mode. ... I thought that the litmus test was that the router functions fine when no NLB is installed, but when it is, things start going screwy. ...
    (microsoft.public.windows.server.clustering)
Loading