Re: Backups Failing with error code 0X80070458

Hi Robert

Many thanks for your reply.

I trieds the steps as provided & it was the RSM database that was corrupt.
I renamed NTMSDATA & then restarted storage service & this allowed backups
to run correctly so many thanks for your assistance

Regards

Paul

<v-robeli@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:6O4FyLpUIHA.1528@xxxxxxxxxxxxxxxxxxxxxxxxx
Hi Paul,

Thanks for posting in our newsgroup.

From your description, I know that on SBS server, the NTbakcup failed and
you get error 0x80070458 in the backup log. If that's not right , please
don't hesitate to let me know.

Based on my research on the error message, please try the following steps
to see if the problem can be resolved:

Step 1: In the backup log, I found "Unable to detect tape drive or tape
media.". The problem may cause be caused by backup device. Please check if
it's in the HCL list.

HCL list:
http://www.windowsservercatalog.com/

You can disconnect and reconnect the tape drive, test again. Please also
contact the hardware vendor to install the latest driver.

Step 2: Please backup to local hard disk and see if the issue will
reoccur.
We do this step to see if the problem is caused by you tape.

1. Click Star and select Run.
2. Input ntbackup, click OK and then click Next.
3. Select Back up files and settings and click Next.
4. Select choose what to backup and click Next.
5. Choose the item to backup and click Next.
6. Select location to save your backup, please select a folder on local
hard disk.
7. Click finish and see if the same issue will reoccur.

Step 3: The issue occurs when RSM database is corrupted, please check the
following:

1. Run services.msc
2. Disabled the Removable Storage Service.
3. Navigate to c:\windows\system32\NTMSdata
4. Rename the file NTMSDATA to NTMSDATA.OLD
5. Enable the Removable Storage Service.
6. Try again.

Step 4: The backup device may conflict with other USB device, please
uninstall drivers for any removable storage devices (USB Hard Drives, Zip
drives, etc...) and unplug them, then try again.

Step 5: This problem may occur if your tape drive supports tapes with
different media block sizes. When you configure a backup by using the SBS
2003 Server Management console, the backup program selects the first tape
type that is available, and this selection may not correspond to the tape
that is in the drive. To fix this, please install the hotfix in the
following KB:

"The requested media failed to mount" error message when you try to
perform
a backup in Windows SBS 2003
http://support.microsoft.com/?id=831664

If the problem persists, please help me collect the following information
for further research:

1. MPS Report

1) Download MPS report tool from:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
15706/MPSRPT_SETUPPerf.EXE
2) Run the MPSRPT_SETUPPerf.exe on the server box.
3) Wait for 10~15 minutes.
4) Open Windows explorer, navigate to
%SYSTEMROOT%\MPSReports\Setup\Reports\cab\
5) Send the .cab file to us.

2. Backup log in C:\Documents and Settings\SBS Backup User\Local
Settings\Application Data\Microsoft\Windows NT\NTBackup\data folder.

Please send the information to v-robeli@xxxxxxxxxxxxx with subject:
40186911 41265690-Backups Failing with error code 0X80070458.

I am looking forward to hear from you.

If you need further assistance, please don't hesitate to let me know.

Best regards,

Robert Li(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================

This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check
the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In
doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no
rights.

--------------------
<NNTP-Posting-Date: Tue, 08 Jan 2008 11:28:47 -0600
<From: "Franky" <frankie_600@xxxxxxxxxxxxx>
<Newsgroups: microsoft.public.windows.server.sbs
<Subject: Backups Failing with error code 0X80070458
<Date: Tue, 8 Jan 2008 17:28:47 -0000
<X-Priority: 3
<X-MSMail-Priority: Normal
<X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
<X-RFC2646: Format=Flowed; Original
<Message-ID: <V8udnQXoKM9SLx7anZ2dnUVZ8t2snZ2d@xxxxxx>
<Lines: 107
<X-Usenet-Provider: http://www.giganews.com
<NNTP-Posting-Host: 217.41.31.232
<X-AuthenticatedUsername: NoAuthUser
<X-Trace:
sv3-kUw2+uBWgVPVcMBIKeX17rqOYnVsR1D+CWZIW1Ek2Uq9QEwxS/G1TmLnL94/giREQgPOXc+u
NXv4S0f!n8buMM00O4KRWuNGAaSlNuQyL6biCLZKRMgs2IgSyAPU5gYBOgalTM5bjZ9o9sAF8iG1
jA/I9UQ=
<X-Complaints-To: abuse@xxxxxxxxxxxxxx
<X-DMCA-Complaints-To: abuse@xxxxxxxxxxxxxx
<X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
<X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your
complaint properly
<X-Postfilter: 1.3.37
<Bytes: 4965
<X-Original-Bytes: 4922
<Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!newsfeed0
0.sul.t-online.de!t-online.de!border2.nntp.dca.giganews.com!border1.nntp.dca
giganews.com!nntp.giganews.com!local01.nntp.dca.giganews.com!nntp.bt.com!ne
ws.bt.com.POSTED!not-for-mail
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:85347
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Hi All
<
<I know this issue has been covered many times so please excuse me if
someone
<has already answered but I am desperate for a resolution
<
<My client has SBS2003 SP2 & the problem I am experiencing is
"backups"!!!!!
<
<Here is the last log file
<
<
<1/7/2008 7:00 PM
<-------------------------------
<Date: 1/7/2008
<Time: 7:00 PM
<User: SYSTEM
<-------------------------------
<
<Backup Runner started.
<NTMS session started successfully.
<EnumerateNtmsObject(NTMS_LIBRARY) succeeded.
<Will enumerate on 9 media libraries found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 0 media types found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 0 media types found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 0 media types found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 0 media types found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 1 media types found.
<GetNtmsObjectInformation(NtmsPhysicalMediaInfo) succeeded.
<GetNtmsObjectInformation(NtmsMediaTypeInfo) succeeded.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Found an enabled library.
<InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
<Identify Media completed
<EnumerateNtmsObject(NTMS_PHYSICAL_MEDIA) succeeded.
<Will enumerate on 0 media types found.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
<Unable to detect tape drive or tape media.
<GetTapeMediaPoolName failed. (0x80070458)
<GetBackupDestination failed. (0x80070458)
<LaunchNTBackup failed. (0x80070458)
<NTBackup finished the backup with errors.
<
<For more information about failed backups, see the article on
<troubleshooting your backup at the following Web page:
<http://go.microsoft.com/fwlink/?LinkId=18414
<
<Backup ended at Monday, January 07, 2008 7:00 PM
<Backup error finished with error code 0X80070458.
<
<If I go into Libraries & try to access the drive I receive the error
"Unable
<to read from or write to the database, there is a problem with the
Removable
<Storage Service. please restart the service"
<
<Then this following error
<
<"The object identifier does not represent a valid object. This snapin's
<display may be inconsistent with the Removable Storage Service, please
<restart the snapin
<
<I have restarted the services & continue to receive the same error
<
<After some searching I found a possible fix from MS
<
<http://support.microsoft.com/kb/841187
<
<I applied this but still experience the same problems.
<
<I have changed media, cleaned drive but to no avail
<
<The only other information I could locate relating to this problem was to
<"rebuild the RSM Database", does anyone think that this is the cause &
<possible resolution??
<
<Any help would be greatly appreciated
<
<Thanks in advance
<
<Paul
<
<
<
<



.

Relevant Pages

  • Re: Backup Runner Problems
    ... SBS ROCKS ... > Device Manager) was not being recognised by the backup application. ... > this time the error message was "The Media failed to mount". ... > File - it shows to me how little I know about tape backup! ...
    (microsoft.public.windows.server.sbs)
  • RE: Backup err - Cannot locate specified media or backup device
    ... I understand NTBackup can't see the media in ... the tape device. ... Free pool, Import pool, Unrecognized pool, and Backup ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 Backups failing with error 0X80070458
    ... It seems that the tape drive is not being detected. ... different media block sizes. ... Backup log. ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • Re: Backup Error
    ... I recommend you to follow these steps to prepare the media that you ... This operation writes a "free media" label on each tape. ... Ntbackup can use only prepared tapes during a backup session. ...
    (microsoft.public.windows.server.sbs)
  • Re: Backups Failing with error code 0X80070458
    ... Microsoft CSS Online Newsgroup Support ... you get error 0x80070458 in the backup log. ... different media block sizes. ...
    (microsoft.public.windows.server.sbs)
Loading