Re: Rmote Access problem

what access method are you usign?

1) Are you usign Remote Web Workplace?
2) Are you connecting via VPN and then using mstsc.exe to connect to the
server?
3) Are you connecting from the internal network?

In case it's 2 check to see if, after loosing remote connection to the
server you can still ping the server.

"Alfredo F. Gonzalez" <lourdesg@xxxxxxxxxxx> escreveu na mensagem
news:VYdhj.18467$Xo1.3771@xxxxxxxxxxx
At the company we have a server running Windows Small Business Server
2003,
but we have a problem trying Remote Access to it.
We can get to the log on page.
From there, once logged on we are taken to the main menu page.
There you select the task to access the Server desktop, or to access a
client station or any other task and click to proceed.
And after you select the task the server just stops
All you get in response to the command is a blank page with headinga and
the
log off - Main menu choices.
After a few minutes an error message appears:
***************
VBScript: Remote Desktop Disconnected
------------------------------------------------------------------------------------------------
The client could not connect to the remote computer. Remote connections
might not be enabled or the computer might be too busy to accept new
connections. It is also possible that network problems are preventing your
connection. Please try connecting again later. If the problem continues to
occur, contact your administrator.

OK
**********************************
We know that the remote connection is enabled. The server is not too busy.
There are no other connections, the network is working.
We can access the Exchange and retrieve email, on the same sever.
We know we connect to the server since the logon page and subsequent pages
emanate from it.
How can we solve this remote access problem? Any suggestions and help will
be appreciated.
A. Gonzalez



.

Relevant Pages

  • Re: Remote Administration
    ... I am connecting directly to the IP address ... The SBS is still ... ISA Server to enable the Remote Desktop connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Administration
    ... I am connecting directly to the IP address ... The SBS is still ... ISA Server to enable the Remote Desktop connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant connect suddenly
    ... There are two NICs in the SBS 2003 server, ... the 24 ports switch which connecting to the Internet. ... > if 1 then possibly a Faulty NIC, if 2 then only remote or only LAN ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Desktop Printing Problems
    ... Neither remote XP PC is on a network. ... connecting to the 2003 server. ... with remote printing to it's HP1160 when connected to the 2003 server. ... printer is connected to XP1. ...
    (microsoft.public.windowsxp.work_remotely)
  • Problem with HP 1005 printer and Terminal Server
    ... We have some remote workers connecting on a remote Windows 2003 ... Terminal server. ... Other printer is HP 1005 Laserjet. ...
    (microsoft.public.windows.server.general)