Re: Inbound fax Issues SBS2003

I can receiving about 80% of my faxes and the others are partials. changed
the ring to 3 and here is the partial errors I am getting, Icould not get
the std modem driver to wokr on the couirer modem. Did a firmware update.
Event Type: Error
Event Source: Microsoft Fax
Event Category: Inbound
Event ID: 32034
Date: 1/9/2008
Time: 12:36:04 PM
User: N/A
Computer: SERVER01
Description:
An incoming fax could not be received due to a reception error. Only part of
the incoming fax was received. Contact the sender and request that the fax be
resent. File Name: C:\Documents and Settings\All Users\Application
Data\Microsoft\Windows NT\MSFax\Queue\1C852E5EB32E9.tif. From: . CallerId: .
To: DDA. Recovered Pages: 2. Total Pages: 3. Transmission time: 0:01:21.
Device Name: Courier V.Everything EXT PnP (V90-x2).

I am still getting one or two of the following.
Event Type: Error
Event Source: Microsoft Fax
Event Category: Inbound
Event ID: 32092
Date: 1/9/2008
Time: 12:56:15 PM
User: N/A
Computer: SERVER01
Description:
The Fax service failed to receive a fax. From: . CallerId: . To:
DDAInsurance Markets. Pages: 0. Device Name: Courier V.Everything EXT PnP
(V90-x2).


"SBS Rocker" wrote:

Kevin,
I had a similiar experience where I changed modems because the current was
acting funny even though I was able to run the diags on it and it checked
out ok. The new modem could not receive. I found out later that if I used
the Windows Standard 56000bps modem everything worked fine. For some reason
or another the mfg drivers were very inconsistent in their functioning
properly. I've suggested this fix before in this NG and it worked fine for
the poster. Mine has been working fine for over a year now and have even
attached a second modem using the same Windows Standard drivers. Give it a
try. it can't hurt.



"Kevin" <Kevin@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:91753E56-583C-4F4F-A135-0ADB9CC98369@xxxxxxxxxxxxxxxx
My mistake on part two this is the correct error.
Event Type: Error
Event Source: Microsoft Fax
Event Category: Inbound
Event ID: 32092
Date: 1/8/2008
Time: 3:14:12 PM
User: N/A
Computer: SERVER01
Description:
The Fax service failed to receive a fax. From: Bradford Hills Vet.
CallerId:
. To: DDAInsurance Markets. Pages: 0. Device Name: Courier V.Everything
EXT
PnP (V90-x2).


"Kevin" wrote:

Part One.
I have a sbs2003 server with a external 3Com Courier V.Everything EXT PnP
(V90-x2) modem attached. no changed made to the server and a few weeks
ago
some faxes are partials and and can not be seen and they are 1/4 of a
page
that is viewable.

Event Type: Error
Event Source: Microsoft Fax
Event Category: Inbound
Event ID: 32034
Date: 1/8/2008
Time: 10:40:57 AM
User: N/A
Computer: SERVER01
Description:
An incoming fax could not be received due to a reception error. Only part
of
the incoming fax was received. Contact the sender and request that the
fax be
resent. File Name: C:\Documents and Settings\All Users\Application
Data\Microsoft\Windows NT\MSFax\Queue\1C8520C73B81C.tif. From: .
CallerId: .
To: DDAInsurance Markets. Recovered Pages: 1. Total Pages: 2.
Transmission
time: 0:02:56. Device Name: Courier V.Everything EXT PnP (V90-x2).

Part Two
I removed this fax modem and replaced it with another of the same kind.
I can send faxes but now can not reciev them. modem answeres then
disconnects.

Event Type: Error

Event Source: Microsoft Fax

Event Category: Inbound

Event ID: 32034

Date: 1/8/2008

Time: 10:40:57 AM

User: N/A

Computer: SERVER01

Description:

An incoming fax could not be received due to a reception error. Only part
of
the incoming fax was received. Contact the sender and request that the
fax be
resent. File Name: C:\Documents and Settings\All Users\Application
Data\Microsoft\Windows NT\MSFax\Queue\1C8520C73B81C.tif. From: .
CallerId: .
To: DDAInsurance Markets. Recovered Pages: 1. Total Pages: 2.
Transmission
time: 0:02:56. Device Name: Courier V.Everything EXT PnP (V90-x2).

Could some please help me.
Kevin





.

Relevant Pages

  • Re: Cant receive incoming faxes?
    ... My gut feel is that your modem is not at all answering the incoming fax ... faxes using your moden then you should not have great problems in receiving ... >>>Thanks Chris ...
    (microsoft.public.windowsxp.print_fax)
  • Re: SocketModem query (3)
    ... When the receiving DTE wants to suspend the reception by dropping ... the DCE (receiving modem) sooner or later stops ... protocols this size can be negotiated at startup. ...
    (comp.arch.embedded)
  • Re: Partially Received Fax Problem
    ... year old driver for say NT Server, than a Latest and greatest Driver for XP ... >I recently installed a US Robotics V92 56k PCI Fax modem on Windows ... I can send faxes easily, ... > machine was using the same line and never had a problem receiving. ...
    (microsoft.public.windows.server.sbs)
  • Re: Would anyone happen to know.....
    ... Seems that the extra modes and handshaking caused the receiving fax to time ... Have you setup the modem log and looked at the entries? ... and your modems delay before disconnect may not be long ... >> get windows fax to work, as opposed to just the Brother software, I ...
    (microsoft.public.windowsxp.print_fax)
  • Re: partially received or failed fax
    ... I recently installed the SBS 2003 fax server feature with a brand new ... USR 325610B (56K Performance Pro Modem). ... I have a couple of clients ... Receiving is a little more tricky. ...
    (microsoft.public.windows.server.sbs)